Comdial Executech Model Xe Model 2000 User Card Manual

							1. 
2. 
3. 
4. Press ITCM % + 1. 
Press Auto dial softkey (memory location). 
Select line key, line group (1 - 4), or ITCM. 
Dial number to be stored (up to 15 digits for 
Model XE System and 16 digits for Model 
2000 System). 
NOTE? . 
Digits O-9, 0, # can be stored 
l Hookflash can be stored by pressing TAP. 
l Pause can be stored by pressing HOLD. 
5a. Press T/C (TRANSCONF) and repeat steps 
2-4 to program another autodial softkey. 
-or- 
5b. Press SPKR to quit. 
6. Log all stored numbers on back of this user 
guide. 
Station Speed Dial 
1. Press ITCM % % 2. 
2. Press a softkey keypad digit (0 through 9). 
3. Repeat steps 3 through 6 as detailed above 
(Auto Dials). 
DSS 
1. Press ITCM ++ % 3. 
2. Press softkey. 
3 Dial extension. 
4. Repeat 2 and 3 as required 
5 Press SPKR to quit. 
AUTO REDIAL KEY 
1. Press lTCM+i+k 1. 
2. Press desired softkey. 
3. Press #. 
4. Press SPKR to quit. STATION SPEED PIAL RECORD 
0 
1 
2 
5 
6 
‘ 
7 
8 
9 
AUTO DIAL RECORD 
0 0 
0 0 
0 0 
0 0 
0 
0 
0 0 
0 0 
0 0 
0 0 
0 0 
0 0 
Attendant = ITCM 0 
Background Music 
= ITCM 
%l (ON) #l (OFF) 
Voice Announce Blocked = ITCM #+2 (ON) #2 (OFF) 
Call Pickup-Directed 
= ITCM *4 + Ringing ext. 
Call Pickup-System (group) = ITCM #4 
Personal Ring Tones = 
ITCM $04 
+l(Tonel) + 2 (Tone 2) 
+ 3 (Tone 3) 
+ 4 (Tone 4) 
MODEL XE SYSTEM ONLY 
Zone 1 Paging = ITCM 4 
Zone 2 Paging = ITCM 5 
Zone 3 Paging = ITCM 6 
All Call Paging = ITCM 7 
MODEL 2000 SYSTEM ONLY 
Primary Trunk Group 1 = ITCM 9 
COMDIAL 
ExecuTech Model XE 
And Model 2000 
Telephone Systems 
Secondary TrunkGroup 2 = ITCM 
81 
Secondary Trunk Group 3 = ITCM 82 
Secondary Trunk Group 4 = ITCM 83 
Message Waiting = ITCM *3 
(ON) #3 (OFF) 
Automatic Call Back = ITCM %6 (ON) #6 (OFF) 
LCD Messaging = ITCM t7 (ON) #7 (OFF) 
Line Goup Queue = HOLD + Line Key 
Trunk Group Queue = ITCM %8 
(ON) #8 (OFF) 
Night Answer = ITCM 80 
Zone 1 Paging = ITCM 84 
Zone 2 Paging 
= ITCM 85 
Zone 3 Paging = ITCM 86 
Meet-Me Paging = ITCM 88 
All Call Paging = ITCM 87 
Call Waiting 
= ITCM 
+++ol (ON) #ol (OFF) 
Station-to-Station 
Messaging = ITCM ++02 (ON) #02 (OFF) 
Call Forwarding -All Calls = ITCM %5 (ON) #5 (OFF) 
Call Forward - Personal = ITCM 005 (ON) #05 (OFF) 
COMDIAL Station 
User’s Guide 
Charlottesville, Virginia 22906-7266 
Printed in U.S.A. ~-~‘XA7o-ll6.02 
-&WlI)h-O4@ 
9189  
						

							Standard 
l Lift handset. 
l Press flashing LINE or ITCM key 
0 Talk. 
Speakerphone 
l Press flashing LINE or ITCM key. 
. Talk. ’ 
Station with Ringing Line Preference 
With calls ringing at this station, 
l Lift handset. 
l Talk. 
Call Pickup - Directed 
l ITCM. 
l *4. 
l Station number (of ringing station). 
Call Pickup - System (Group) 
o ITCM. 
e #4. 
Standard 
l Lift handset. 
l Select LINE or ITCM key. 
l Dial number or press auto dial key. 
l Talk. 
Speakerphone 
e Press LINE or ITCM key. 
l Dial number or press auto dial key. 
l Talk. 
NOTE: Selecting AutodiaVSpeed Dial/or DSS 
eliminates need for: select LINE or ITCM + dial no. 
Voice Announce 
l Lift handset. 
l Press DSS (or Press ITCM and dial station 
number). 
l Make announcement. 
Line Group Access 
j 
(Model System 2000 Only) 
l Lift handset 
l Press ITCM 
l Press Group Access Code: 
9 Group 1 
84 Group 2 
85 
Group 3 
86 Group 4 
l Dial telephone number 
Station Speed Dial 
’ 
While station is idle, 
l Press keypad digit 0 - 9 (see Number Record 
on back of this page). 
System Speed Dial 
While station is idle, 
l Press f and two digit memory location (see 
attendant for system speed dial list). 
Last Number Redial 
While station is idle, 
0 Press #. 
Auto Redial 
While station is idle, 
l Press assigned Auto Redial key (refer to 
programming instructions on back of this 
paw). 
l Press T/C (TRANSKZONF). 
l Press DSS (or dial intercom party station 
number). 
When intercom party answers, 
e Hang up handset (or speaker off). 
Unscreened Transfer 
l Press T/C (TRANSXONF). 
a Press DSS. 
l Hang up. Multiline conference (2 external parties, 1 in- 
ternal party) 
To set up, 
l Establish first outside call and press T/C 
(TRANSCONF). 
l Establish second outside call and press T/C 
(TRANSKONF). 
l Talk. 
Add-on conference (1 external party, 2 internal 
parties) 
. Establish outside call. 
l Press T/C (TRANS/CONF). 
l Dial extension number of ITCM party or 
press DSS. 
l Wait for answer. 
l Press T/C (TRANWCONF) (a three-way 
connection is established). 
l While on line, press HOLD (regular HOLD). 
l While on line, press HOLD + HOLD (ex- 
clusive HOLD). 
To retrieve 
l Press flashing held LINE key. 
Direct Station Hold 
(Model 2000 System Only) 
(Park a call to a station) 
To set, 
l While on line, press ITCM (outside call 
placed on hold). 
l Press + 90 + extension number to receive 
park. 
To retrieve 
0 From the park receiving extension, press 
#90. 
Call Park (Model 2000 System Only) 
To set, 
l While on line, press ITCM. 
0 Press +K. 
l Select a park zone (91 - 99). 
To retrieve (from any station), 
l Press ITCM. 
l Press #. 
l Select a park zone (91 - 99). 
Zone 
To originate, 
* Lift handset 
l Press ITCM + zone number. 
Model 2000 System 
XE System 
84 (Zone 1) 
4 
85 (Zone 2) 
5 
86 (Zone 3) 
6 
l Make announcement 
l Stay on page (if waiting for answerback) 
All Call 
To originate, 
l Lift handset 
l Press ITCM, 87 (Model 2000 System), 
7 (Model XE System) 
l Make announcement 
l Stay on page (if waiting for answerback) 
Meet Me Page (Answerback of Page) 
. Lift handset (of nearest station) 
l Press ITCM + 88 
l Talk 
External 
l Lift handset 
l Dial assigned page access code 
-or- 
* Press page key.