Comdial Dxp Plus, Fx Series Instructions Manual

Installing the Cards in the DXP1.Loosen the retaining hardware and remove the front panel from the DXP main cabinet.
2.Turn off the AC power switch, and disconnect the AC power cord from the AC outlet. Disconnect the cable of the
optional battery back-up from the main cabinet power supply.
3.Place a conductive mat in front of the cabinet area and ground the mat to a good earth ground (the third wire
ground of the AC power line is an acceptable grounding point). The grounded conductive mat will provide a...

GCA40-182Understanding the VMMIFront Panel 
--+
#4-40 Machine Screw(Two PlacesDXCPU
Circuit Board
-
+ #l-40 Machine Screw
#I Lockwasher
- DXPSW-XXXXX
Circuit Card
- DXRAM-XXXXX
Circuit Card
l/4 Hex, #4-40 \ I:.:DXPSW-XXXXX
M-F Spacer,
,625 Long0 $-Connectors1k#4 Lockwasher -‘L+I
Ia  
DXFLAM-XXXXXI
I
f ;I
Connectors:..: y l/4 Hex, #4-40:..:
Front-bM-F Spacer,
Panel.625 Long6&C
l\ 1ft #4 Lockwasher
I
I
#4-40 Hex Nut (3X) -AI
I
Installing The Memory and 
Softwag Cards
Up-Grading the System Software on the...

Understanding the VMMIGCA40-182
Master Clearing the DXP System
1.
2.
3.
3.
4.If you do not master clear the system, it is possible the DXP will not perform properly with the new memory card.
The DXCPU-68K board provides a method for the master clear to occur automatically at the initial power up
after you have changed or upgraded the software card. When you perform an upgrade, you must execute the
following sequence of events exactly as they are stated here:
On the DXPCPU-68K circuit board, set DIP...

GCA40-182Understanding the VMMI0
Reset Button --0Set DIP Switch 1 ON-
-uln 1ri4Jm 2For Fixed Data Port4x 3
Parameters.Kull 4
Set DIP Switch 8 ON 
-+----.For Master Clear Upon
Initial Power Up After
g%Software Upgrade.
OXPO25Locating DIP Switch 8 and the Reset Button
Restorina the Converted Database to the DXP
- DXCPU-68K
/ DXRAM-xxx
/DXSW-xxxConnect your PC to the DXP and use VMMI to restore the translated 
10A database to the DXP. (Note that
with VMMI, you do not need the XMODEM communications program...

Understanding the VMMIGCA40-182Translating the DXP Database
You can use the VMMI to translate the database residing in a DXP to a format that is compatible with the
IOA software release. Before you can translate the database, you must convert it to a 9A software release
level as described in the paragraph titled Converting the DXP Database.
1.Select the VMMI program from the Windows menu screen.
2.From the VMMZ window, select the File pull-down menu.
3.From the File pull-down menu, select Open. System...

GCA40-182Understanding the VMMI(d) Since your system may not include one or both expansion cabinets or you do not care for the software
arranged board layout, use your mouse to move the board images to the slots that you would rather that they
occupy. Make a record of these board locations so that you or your installer can physically install the boards
to match your plan.
/  DXP Plus Upper Expansion Cabinet Universal Slot Designation\  Enter Product Code Of Installed Board
1
10(1-32)/AUXl
11 (I-32)/AUX21...

COMDUKCharlottesville, Virginia 
22901-2829World Wide Web: 
http://w~w.comdial.com/Printed in 
U.S.AGCA40-182.04
9197