Comdial DXP, DXP Plus, And Impact FX Release 14a Instructions Manual

							5.
Use VMMI to log into the system, open theSwitchdrop-down menu, and click onSystem Software Upgrade.
6.
Archive the existing database as prompted (if desired) by going toSwitch/Archive Databaseon the VMMI
screen and continue.
7.
From the system software upgrade window, click theProvide a New Keyline, and type the system software
key character sequence into the open block.
8.
ClickNext,browse for and select the software upgrade xxxxxxxx.bin file that you earlier stored in the PC.
9. VMMI provides a new screen that presents the feature set and release number of the software upgrade.
10.
ClickFinishon this screen, and observe that the system loads the software and then resets itself.
11. Reconnect VMMI to the system, and restore the archived database or reprogram the features as needed.
12. If CTI applications are a part of the installation, restart the Key Update Utility program (using the same
procedure detailed in step three); enter the new CTI application magic number character sequence into the
update utility; and then click theUpdate Keybutton. The utility menu shows a completion code value to
indicate that the procedure is finished. Verify that the completion code matches the completion code that the
Comdial representative provided to you, and click theDonebutton to end the session.
13. Restart the voice mail manager service.
From theStart/Settings/Control PanelLocation, select theServicesicon, highlightvoice mail manager, and
clickStart.
By completing the above procedure, you enable the system operating software for the telephony
portion of the system(and enable the CTI applications that run on the PC portion of the system if CTI
applications are a part of the installation).
Upgrading the Impact FX Software – 17
Programming the FeaturesGCA40–218 
						

							This page remains intentionally blank. 
						

							This manual has been developed by Comdial Corporation (the “Company”) and is intended for
the use of its customers and service personnel. The information in this manual is subject to
change without notice. While every effort has been made to eliminate errors, the Company
disclaims liability for any difficulties arising from the interpretation of the information
contained herein.
The information contained herein does not purport to cover all details or variations in
equipment or to provide for every possible contingency to be met in connection with
installation, operation, or maintenance. Should further information be desired, or should
particular problems arise which are not covered sufficiently for the purchaser’s purposes
contact, Comdial, Inside Sales Department, P.O. Box 7266, Charlottesville, Virginia 22906. 
						

							GCA40–218.02 11/99
printed in U.S.A.