Cisco Sg3008 Manual

Administration
System Settings
60 Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version) 
5
System Settings
The System Summary page provides a graphic view of the device, and displays 
device status, hardware information, firmware version information, general PoE 
status, and other items.
Displaying the System Summary
To view system information, click Status and Statistics > System Summary.
The System Summary page contains system and hardware information....

Administration
System Settings
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)  61
5
 
•Current Time—Current system time.
•Base MAC Address—Device MAC address. 
•Jumbo Frames—Jumbo frame support status. This support can be enabled 
or disabled by using the Port Settings page of the Port Management menu. 
NOTEJumbo frames support takes effect only after it is enabled, and after 
the device is rebooted.
TCP/UDP Services Status:
•HT TP Service—Displays...

Administration
System Settings
62 Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version) 
5
•Language MD5 Checksum—MD5 checksum of the language file.
PoE Power Information:
•Maximum Available PoE Power (W)—Maximum available power that can 
be delivered by the PoE.
•Total PoE Power Consumption (W)—To t a l  P o E  p o w e r  d e l i v e r e d  t o  
connected PoE devices.
•PoE Power Mode—Port Limit or Class Limit.
 
System Settings
To enter system settings:...

Administration
Console Settings (Autobaud Rate Support)
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)  63
5
 
•Custom Banner Settings—The following banners can be set:
-Login Banner—Enter text to display on the Login page before login. 
Click Preview to view the results.
-Welcome Banner—Enter text to display on the Login page after login. 
Click Preview to view the results.
NOTEWhen you define a login banner from the web-based configuration 
utility,...

Administration
Management Interface
64 Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version) 
5
Management Interface
See IPv4 Management and Interfaces.
User Accounts
See Defining Users.
Defining Idle Session Timeout 
The Idle Session Timeout configures the time intervals that the management 
sessions can remain idle before they timeout and you must log in again to 
reestablish one of the following sessions:
• HTTP Session Timeout
•HTTPS Session Timeout...

Administration
System Log
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)  65
5
 
System Log
See Administration: System Log.
File Management
See Administration: File Management.
Rebooting the Device 
Some configuration changes, such as enabling jumbo frame support, require the 
system to be rebooted before they take effect. However, rebooting the device 
deletes the Running Configuration, so it is critical that the Running Configuration is 
saved to the...

Administration
Rebooting the Device
66 Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version) 
5
•Reboot—Reboots the device. Since any unsaved information in the Running 
Configuration is discarded when the device is rebooted, you must click Save 
in the upper-right corner of any window to preserve current configuration 
across the boot process. If the Save option is not displayed, the Running 
Configuration matches the Startup Configuration and no action is...

Administration
Routing Resources
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)  67
5
 
Routing Resources
Use the Router Resources page to display TCAM allocation and modify total 
TCAM size. TCAM entries are divided into the following groups:
•IP Entries—TCAM entries reserved for IP static routes, IP addresses on the 
device, and IP hosts. Each type generates the following number of TCAM 
entries:
-IPv4 static routes—One entry per route
-IP...

Administration
Health
68 Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version) 
5
You must save your current configuration before changing the TCAM Allocation 
Settings. 
NOTEA summary of the TCAM entries actually in use and available is 
displayed at the bottom of this page. For an explanation of the fields, see 
Viewing TCAM Utilization.
STEP  2Save the new settings by clicking Apply. This checks the feasibility of the TCAM 
allocation. If it is incorrect,...

Administration
Diagnostics
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)  69
5
 
To view the device health parameters, click Status and Statistics > Health.
The Health page displays the following fields:
•Fan Status—Fan status. The following values are possible:
-OK—Fan is operating normally. 
-Fail—Fan is not operating correctly. 
-N/A—Fan ID is not applicable for the specific model.
•Fan Direction—(On relevant devices) The direction that the fans...