Cisco Sg3008 Manual
Here you can view all the pages of manual Cisco Sg3008 Manual. The Cisco manuals for Switch are available online for free. You can easily download all the documents as PDF.
Page 51
Administration: File Management Upgrade/Backup Firmware/Language Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version) 41 4 Select one of the following Save Actions: •Upgrade—Specifies that the file type on the device is to be replaced with a new version of that file type located on a TFTP server. •Backup—Specifies that a copy of the file type is to be saved to a file on another device. Enter the following fields: •File Type—Select the destination...
Page 52
Administration: File Management Active Image 42 Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version) 4 •If SSH server authentication is not enabled, the operation succeeds for any SCP server. Active Image There are two firmware images stored on the device. One of the images is identified as the active image and other image is identified as the inactive image. The device boots from the image you set as the active image. You can change the image...
Page 53
Administration: File Management Download/Backup Configuration/Log Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version) 43 4 Download/Backup Configuration/Log The Download/Backup Configuration/Log page enables: •Backing up configuration files or logs from the device to an external device. •Restoring configuration files from an external device to the device. When restoring a configuration file to the Running Configuration, the imported file adds any...
Page 54
Administration: File Management Download/Backup Configuration/Log 44 Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version) 4 Downloading or Backing-up a Configuration or Log File To backup or restore the system configuration file: STEP 1Click Administration > File Management > Download/Backup Configuration/ Log. STEP 2Select the Transfer Method. STEP 3If you selected via TFTP, enter the parameters. Otherwise, skip to STEP 4. Select either Download or...
Page 55
Administration: File Management Download/Backup Configuration/Log Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version) 45 4 Backup Save Action—Specifies that a file type is to be copied to a file on another device. Enter the following fields: a.Server Definition—Select whether to specify the TFTP server by IP address or by domain name. b.IP Version—Select whether an IPv4 or an IPv6 address is used. c.IPv6 Address Type—Select the IPv6 address type (if...
Page 56
Administration: File Management Download/Backup Configuration/Log 46 Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version) 4 STEP 4If you selected via HTTP/HTTPS, enter the parameters as described in this step. Select the Save Action. If Save Action is Download (replacing the file on the device with a new version from another device), do the following. Otherwise, go to the next procedure in this step. a.Source File Name—Click Browse to select a file or...
Page 57
Administration: File Management Download/Backup Configuration/Log Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version) 47 4 SSH Client Authentication—Client authentication can be done in one of the following ways : •Use SSH Client—Sets permanent SSH user credentials. Click System Credentials to go to the SSH User Authentication page where the user/ password can be set once for all future use. •Use SSH Client One-Time Credentials—Enter the following:...
Page 58
Administration: File Management Configuration Files Properties 48 Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version) 4 If Save Action is Backup (copying a file to another device), enter the following fields (in addition to those fields listed above): •Source File Type—Select the configuration file type. Only valid file types are displayed. (The file types are described in the Files and File Types section). •Sensitive Data—Select how sensitive data...
Page 59
Administration: File Management Copy/Save Configuration Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version) 49 4 configuration file, if it exists, is deleted. See System Files for a description of mirror files and why you might not want to automatically create mirror configuration files. STEP 3If required, select either the Startup Configuration, Backup Configuration or both and click Clear Files to delete these files. Copy/Save Configuration When...
Page 60
Administration: File Management Auto Configuration via DHCP 50 Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version) 4 •If you are backing up a configuration file, select one of the following formats for the backup file. -Exclude—Sensitive data is not included in the backup file. -Encrypted—Sensitive data is included in the backup file in encrypted form. -Plaintext—Sensitive data is included in the backup file in plain text. NOTEThe available sensitive...