Cisco Sg3008 Manual

Security: SSH Client
Common Tasks
463 Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version) 
22
STEP  4If the public/private key method is being used, perform the following steps:
a. Select whether to use an RSA or DSA key, create a username and then 
generate the public/private keys.
b. View the generated key by clicking the Details button, and transfer the 
username and public key to the SSH server. This action depends on the server 
and is not described in...

Security: SSH Client
SSH Client Configuration Through the GUI
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)  464
22
 
SSH Client Configuration Through the GUI
This section describes the pages used to configure the SSH Client feature.
SSH User Authentication
Use this page to select an SSH user authentication method, set a username and 
password on the device, if the password method is selected or generate an RSA 
or DSA key, if the public/private key...

Security: SSH Client
SSH Client Configuration Through the GUI
465 Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version) 
22
•Key Source—Auto Generated or User Defined.
•Fingerprint—Fingerprint generated from the key.
STEP  6To handle an RSA or DSA key, select either RSA or DSA and perform one of the 
following actions:
•Generate—Generate a new key.
•Edit—Display the keys for copying/pasting to another device.
•Delete—Delete the key.
•Details—Display the...

Security: SSH Client
SSH Client Configuration Through the GUI
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)  466
22
 
•IP Version—If you selected to specify the SSH server by IP address, select 
whether that IP address is an IPv4 or IPv6 address.
•IP Address Type—If the SSH server IP address is an IPv6 address, select 
the IPv6 address type. The options are:
-Link Local—The IPv6 address uniquely identifies hosts on a single 
network link. A link local...

Security: SSH Client
SSH Client Configuration Through the GUI
467 Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version) 
22
-Link Local—The IPv6 address uniquely identifies hosts on a single 
network link. A link local address has a prefix of FE80, is not routable, and 
can be used for communication only on the local network. Only one link 
local address is supported. If a link local address exists on the interface, 
this entry replaces the address in the...

23
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)  468
 
Security: SSH Server
This section describes how to establish an SSH session on the device.
It covers the following topics:
•Overview
•Common Tasks
•SSH Server Configuration Pages
Overview
The SSH Server feature enables users to create an SSH session to the device. 
This is similar to establishing a telnet session, except that the session is secured.
Public and private keys are automatically...

Security: SSH Server
Common Tasks
469 Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version) 
23
Common Tasks
This section describes some common tasks performed using the SSH Server 
feature. 
Workflow1: To logon to the device over S SH using the device’s 
automatically-created (default) key, perform the following:
STEP 1Enable SSH server in the TCP/UDP Services page and verify that SSH user 
authentication by public key is disabled in the SSH User...

Security: SSH Server
SSH Server Configuration Pages
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)  470
23
 
SSH Server Configuration Pages
This section describes the pages used to configure the SSH Server feature.
SSH User Authentication
Use the SSH User Authentication page to enable SSH user authentication by 
public key and/or password, and (when using authentication by public key) to add 
an SSH client user that will be used to create an SSH...

Security: SSH Server
SSH Server Configuration Pages
471 Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version) 
23
•SSH User Authentication by Public Key—Select to perform authentication 
of the SSH client user using the public key.
•Automatic Login—This field can be enabled if the SSH User 
Authentication by Public Key feature was s ele cted. S ee Automatic Login.
The following fields are displayed for the configured users:
•SSH User Name—User name of user....

Security: SSH Server
SSH Server Configuration Pages
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)  472
23
 
•Edit—Enables you to copy in a key from another device. 
•Delete—Enables you to delete a key.
•Details—Enables you to view the generated key. The Details window also 
enables you to click Display Sensitive Data as Plaintext. If this is clicked, the 
keys are displayed as plaintext and not in encrypted form. If the key is 
already being displayed...