Cisco Sg3008 Manual

IP Configuration
Domain Name
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)  335
17
  

IP Configuration
Domain Name
336 Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version) 
17 

IP Configuration
Domain Name
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)  337
17
  

IP Configuration
Domain Name
338 Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version) 
17 

18
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)  328
 
Security
This section describes device security and access control. The system handles 
various types of security.
The following list of topics describes the various types of security features 
described in this section. Some features are used for more than a single type of 
security or control, and so they appear twice in the list of topics below.
Permission to administer the device is described...

Security
Defining Users
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)  329
18
 
•Configuring RADIUS
•Configuring Port Security
•802.1X
•Defining Time Ranges
Protection from other network users is described in the following sections. These 
are attacks that pass through, but are not directed at, the device.
•Denial of Service Prevention
•DHCP Snooping
•SSL Server
•Defining Storm Control
•Configuring Port Security
•IP Source Guard
•ARP Inspection...

Security
Defining Users
330 Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version) 
18
NOTEIt is not permitted to delete all users. If all users are selected, the Delete button is 
disabled.
To add a new user:
STEP 1Click Administration > User Accounts.
This page displays the users defined in the system and their user privilege level.
STEP  2Select Password Recover y Ser vice to enable this feature. When this is enabled, an 
end user, with physical access to...

Security
Defining Users
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)  331
18
 
-Read/Write Management Access (15)—User can access the GUI, and 
can configure the device.
STEP  5Click Apply. The user is added to the Running Configuration file of the device.
Setting Password Complexity Rules
Passwords are used to authenticate users accessing the device. Simple 
passwords are potential security hazards. Therefore, password complexity 
requirements are...

Security
Configuring TACACS+
332 Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version) 
18
•Do not repeat or reverse the manufacturers name or any variant reached by 
changing the case of the characters.
STEP  4If the Password Complexity Settings are enabled, the following parameters may 
be configured:
•Minimal Password Length—Enter the minimal number of characters 
required for passwords.
NOTEA zero-length password (no password) is allowed, and can still...

Security
Configuring TACACS+
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)  333
18
 
•Authorization—Performed at login. After the authentication session is 
completed, an authorization session starts using the authenticated 
username. The TACACS+ server then checks user privileges.
•Accounting—Enable accounting of login sessions using the TACACS+ 
server. This enables a system administrator to generate accounting reports 
from the TACACS+ server.
In...