Cisco Sg3008 Manual

IP Configuration
IPv6 Management and Interfaces
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)  315
17
 
STEP 1Click IP Configuration > IPv6 Management and Interfaces > DHCPv6 Relay > 
Global Destinations.
STEP  2To add a default DHCPv6 server, click Add.
STEP  3Enter the fields:
•IPv6 Address Type—Enter the type of the destination address to which 
client messages are forwarded. The address type can be Link Local, Global 
or Multicast...

IP Configuration
Domain Name
316 Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version) 
17
•IPv6 Interface—Enter the interface on which packets are transmitted when 
the address type of the DHCPv6 server is Link Local or Multicast.
STEP  3Click Apply. The Running Configuration file is updated.
Domain Name
The Domain Name System (DNS) translates domain names into IP addresses for 
the purpose of locating and addressing hosts.
As a DNS client, the device...

IP Configuration
Domain Name
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)  317
17
 
NOTEDo not include the initial period that separates an unqualified name 
from the domain name (like cisco.com).
-D H C P  D o m a i n  S e a r c h  L i s t—Click Details to view the list of DNS servers 
configured on the device.
STEP  3Click Apply. The Running Configuration file is updated.
DNS Server Table: The following fields are displayed for each DNS server...

IP Configuration
Domain Name
318 Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version) 
17
Search List
The search list can contain one static entry defined by the user the DNS Settings 
page and dynamic entries received from DHCPv4 and DHCPv6 servers.
To view the domain names that have been configured on the device:
STEP 1Click IP Configuration > Domain Name > Search List.
The following fields are displayed for each DNS server configured on the device....

IP Configuration
Domain Name
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)  319
17
 
To add a host name and its IP address:
STEP 1Click IP Configuration > Domain Name System > Host Mapping.
STEP  2If required, select the Clear Table option to clear some or all of the entries in the 
Host Mapping Table. 
•Static Only—Deletes the static hosts. 
•Dynamic Only—Deletes the dynamic hosts. 
•All Dynamic & Static—Deletes the static and dynamic hosts. 
The...

IP Configuration
Domain Name
320 Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version) 
17
-Link Local—The IPv6 address uniquely identifies hosts on a single 
network link. A link local address has a prefix of FE80, is not routable, and 
can be used for communication only on the local network. Only one link 
local address is supported. If a link local address exists on the interface, 
this entry replaces the address in the configuration.
-Global—The IPv6...

IP Configuration
Domain Name
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)  321
17
  

IP Configuration
Domain Name
322 Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version) 
17 

IP Configuration
Domain Name
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)  323
17
  

IP Configuration
Domain Name
324 Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version) 
17