Cisco Sg2008 Manual

Viewing Statistics
Logs
Cisco Small Business SG200 Series 8-port Smart Switch31
2
 
The Version 1 log is the current or most recently created log file, the Version 2 log 
is the next most recent, and the Version 3 log is the oldest file. When a new log file 
of the specified type is created, the Version 3 log is deleted and the Version 1 and 
Version 2 logs are renamed to Version 2 and Version 3, respectively.
When a different version and log is selected, the new log automatically displays in 
the Flash...

3
Cisco Small Business SG200 Series 8-port Smart Switch32
 
Administration
This chapter describes how to configure global system settings and perform 
diagnostics.
It contains the following topics.
•Configuring System Settings
•Management Interface
•Managing User Accounts
•Configuring the Idle Session Timeouts
•Login Sessions
•Login History
•Time Settings
•System Logs
•File Management
•Rebooting the Switch
•Pinging Hosts
•Configuring Control Packet Forwarding
•Diagnostics
•Enabling Bonjour
•LLDP-MED...

Administration
Configuring System Settings
Cisco Small Business SG200 Series 8-port Smart Switch33
3
 
Configuring System Settings
The System Settings page enables you to configure information that identifies the 
switch within the network.
To configure system settings:
STEP 1Click Administration > System Settings in the navigation window.
The System Description is hard-coded in the firmware.
STEP  2Enter the parameters:
•System Location—Description of the physical location of the switch.
•System...

Administration
Management Interface
Cisco Small Business SG200 Series 8-port Smart Switch34
3
 
Management Interface
Switch management interface enable access to the web-based switch 
configuration utility from a management station on the network. The switch 
supports configuration of a management VLAN that segregates the management 
traffic from other traffic on the switch.
The management interface can be configured with an IPv4 address or with an IPv6 
address. The addresses can be configured...

Administration
Management Interface
Cisco Small Business SG200 Series 8-port Smart Switch35
3
 
STEP  3Select one of the following options for the IP Address Type:
•DHCP—The management interface obtains its IPv4 address from a DHCP 
server. DHCP is enabled by default and the switch requests an IP address 
from a DHCP server. If it is unable to get the IP address from a server, the 
switch falls back to the factory default static IP address. The System LED 
flashes continuously and the switch keeps trying...

Administration
Management Interface
Cisco Small Business SG200 Series 8-port Smart Switch36
3
 
Configuring an IPv6 Management Interface
Use the IPv6 Interface page to enable access to the web-based switch 
configuration utility over IPv6. You can configure the switch to dynamically learn its 
IPv6 addresses and you can configure IPv6 addresses statically.
To enable IPv6 management access:
STEP 1Click Administration > Management Interface > IPv6 Interface in the navigation 
window.
The Interface field...

Administration
Management Interface
Cisco Small Business SG200 Series 8-port Smart Switch37
3
 
•DAD Status—The Duplicate Address Detection status. When you configure 
an IPv6 address on the switch, before the switch actually assigns the 
address, it performs neighbor discovery to detect if that address is already 
in use on the network.
-If the address is already in use, its DAD status is True, and the address is 
not usable for management access.
-If the address is found to be unique, its DAD status is...

Administration
Management Interface
Cisco Small Business SG200 Series 8-port Smart Switch38
3
 
Viewing and Adding IPv6 Neighbors
When IPv6 management is enabled, the switch identifies IPv6-enabled devices on 
attached links. The switch supports the discovery of up to 1,000 dynamic IPv6 
neighbors and supports the static configuration of IPv6 neighbors. 
The IPv6 Neighbors page lists dynamically discovered and statically configured 
neighbors, and enables adding static hosts.
To view the IPv6 neighbor...

Administration
Managing User Accounts
Cisco Small Business SG200 Series 8-port Smart Switch39
3
 
STEP  4Click Apply and then click Close. Your changes are saved to the Running 
Configuration.
Managing User Accounts
One management user is configured on the switch by default:
•User Name: cisco
•Password: cisco
You can use the User Accounts page configure up to five additional users and to 
change a user password.
Adding a User
To add a new user:
STEP 1Click Administration > User Accounts in the navigation...

Administration
Managing User Accounts
Cisco Small Business SG200 Series 8-port Smart Switch40
3
 
As you enter a password, the number and color of vertical bars changes to 
indicate the password strength, as follows:
•Red—The password fails to meet the minimum complexity requirements. 
The text “Below Minimum” displays to the right of the meter.
•Orange—The password meets the minimum complexity requirements but 
the password strength is weak. The text “Weak” displays to the right of the 
meter....