Cisco Sg2008 Manual

Getting Started
Quick Start Device Configuration
Cisco Small Business SG200 Series 8-port Smart Switch11
1
 
Quick Start Device Configuration
To simplify device configuration through quick navigation, the Getting Star ted 
page provides links to the most commonly-used pages.
Links on the Getting Started Page
Category Link Name (on the Page) Linked Page
Initial Setup Change Device IP AddressIPv4 Interface
Create VLANCreate VL AN
Configure Port SettingsPor t Settings
Device 
StatusSystem SummarySystem...

Getting Started
Window Navigation
Cisco Small Business SG200 Series 8-port Smart Switch12
1
 
Window Navigation
This section describes the features of the web-based switch configuration utility.
Application Header
The Application Header is displayed on every page. It provides the following 
buttons:
Buttons
Name Description
The Syslog Alert Status button (red circle with an X) is 
displayed when a new Syslog message, above the critical 
severity level, is logged. Click to open the Status and 
Statistics...

Getting Started
Window Navigation
Cisco Small Business SG200 Series 8-port Smart Switch13
1
 
Other Resources
You can use the following links on the Getting Started page for additional 
information and assistance with using your switch:
•Support—Displays the support web page for Cisco Small Business 
Managed Switches.
•Forums—Displays the web page for the Cisco Small Business Support 
Community. Log OutClick to log out of the web-based switch configuration 
utility.
AboutClick to display the switch type...

Getting Started
Window Navigation
Cisco Small Business SG200 Series 8-port Smart Switch14
1
 
Navigation Window
A navigation window is located on the left side of each page. Click a top-level 
category to display links to related pages. Links that are preceded by an arrow are 
subcategories that expand to display the related page links.
Management Buttons
The following table describes the commonly-used buttons that appear on various 
pages in the system.
Management Buttons
Name Description
Depending on...

Getting Started
Window Navigation
Cisco Small Business SG200 Series 8-port Smart Switch15
1
 
Select the number of table entries to display on each 
page.
Indicates a mandatory field.
AddClick to display the related Add page and add an entry 
to a table. Enter the information and click Apply. Click 
Close to return to the main page. 
Note: Your changes are applied to the running 
configuration only. If the switch is rebooted, the running 
configuration is lost. To save your changes to the startup...

Getting Started
Window Navigation
Cisco Small Business SG200 Series 8-port Smart Switch16
1
 
Copy SettingsA table typically contains one or more entries containing 
configuration settings. Instead of modifying each entry 
individually, it is possible to modify one entry and then 
copy it to multiple entries, as described below:
•Select the entry to be copied. Click Copy 
Settings.
•Enter the destination entry numbers.
•Click Apply to save the changes to the Running 
Configuration.
•Click Close to return...

Getting Started
Window Navigation
Cisco Small Business SG200 Series 8-port Smart Switch17
1
 
Sort buttonsIf the This table is sor table message appears below a 
table, each column heading is a sort button. Click a 
column heading to sort the records in ascending order, 
based on the contents of the selected column. After the 
sort is applied, an arrow appears in the column heading. 
You can click this arrow to reverse the sort order. Management Buttons (Continued)
Name Description 

2
Cisco Small Business SG200 Series 8-port Smart Switch18
 
Viewing Statistics
This chapter describes how to display switch statistics. 
It contains the following topics.
•System Summary
•Interface Statistics
•Etherlike Statistics
•802.1X EAP Statistics
•IPv6 DHCP Statistics
•RADIUS Statistics
•Logs
System Summary
The System Summary page displays basic information such as the hardware 
model description, software version, language packs, and system up time.
Displaying the System Summary
To view system...

Viewing Statistics
System Summary
Cisco Small Business SG200 Series 8-port Smart Switch19
2
 
•System Contact—Name of a contact person. Click Edit to display the 
System Settings page and enter this value. (The characters , , %, and ? are 
not supported.)
•Hostname—Name of the switch. Click Edit to display the System Settings 
page and enter this value. By default, the switch hostname is composed of 
the word switch concatenated with the three least significant bytes of the 
switch MAC address (the six...

Viewing Statistics
System Summary
Cisco Small Business SG200 Series 8-port Smart Switch20
2
 
Language Pack Table
This table displays information about the languages available on the switch. A 
language can be selected by the administrator when logging into the configuration 
utility.
English is the default language and it is built into the software. You can use the 
Upgrade/Backup Firmware/Language page to download additional language 
packs. Language files are available from the Cisco firmware download...