Cisco Router 860, 880 Series User Manual

 
5-9
Cisco 860 and Cisco 880 Series Integrated Services Routers Software Configuration Guide
OL-xxxxx-xx
Chapter 5      Configuring Backup Data Lines and Remote Management
  Configuring Data Line Backup and Remote Management Through the ISDN S/T Port
(CPE) splitter, a digital subscriber line access multiplexer (DSLAM), and a central office (CO) splitter 
before connecting to the ISDN switch. In 
Figure 5-3, the dial backup link goes directly from the router 
to the ISDN switch.
Figure 5-2 Data Line...

 
5-10
Cisco 860 and Cisco 880 Series Integrated Services Routers Software Configuration Guide
OL-xxxxx-xx
Chapter 5      Configuring Backup Data Lines and Remote Management
  Configuring Data Line Backup and Remote Management Through the ISDN S/T Port
Figure 5-3 Data Line Backup Directly from Router to ISDN Switch
To configure dial backup and remote management through the ISDN S/T port of your router. perform the 
following procedures:
 Configuring ISDN Settings
 Configuring Aggregator and ISDN Peer...

 
5-11
Cisco 860 and Cisco 880 Series Integrated Services Routers Software Configuration Guide
OL-xxxxx-xx
Chapter 5      Configuring Backup Data Lines and Remote Management
  Configuring Data Line Backup and Remote Management Through the ISDN S/T Port
To configure your router ISDN interface for use as a backup interface, perform these steps, beginning in 
global configuration mode:
CommandPurpose
Step 1isdn switch-type switch-type
Example:
Router(config)# isdn switch-type basic-net3
Router(config)#...

 
5-12
Cisco 860 and Cisco 880 Series Integrated Services Routers Software Configuration Guide
OL-xxxxx-xx
Chapter 5      Configuring Backup Data Lines and Remote Management
  Configuring Data Line Backup and Remote Management Through the ISDN S/T Port
Step 8ip address negotiated
Example:
Router(config-if)# ip address negotiatedRouter(config-if)#
Specifies that the IP address for the interface is 
obtained through PPP/IPCP (IP Control Protocol) 
address negotiation. The IP address is obtained 
from the...

 
5-13
Cisco 860 and Cisco 880 Series Integrated Services Routers Software Configuration Guide
OL-xxxxx-xx
Chapter 5      Configuring Backup Data Lines and Remote Management
  Configuring Data Line Backup and Remote Management Through the ISDN S/T Port
Configuring Aggregator and ISDN Peer Router
The aggregator is typically a concentrator router where your Cisco router ATM PVC terminates. In the 
following configuration example, the aggregator is configured as a PPPoE server. 
The ISDN peer router is any...

 
5-14
Cisco 860 and Cisco 880 Series Integrated Services Routers Software Configuration Guide
OL-xxxxx-xx
Chapter 5      Configuring Backup Data Lines and Remote Management
  Configuring Data Line Backup and Remote Management Through the ISDN S/T Port
interface Dialer0 ip address 192.168.2.2 255.255.255.0
 encapsulation ppp
 dialer pool 1 dialer string 384020
 dialer-group 1
 peer default ip address pool isdn!
ip local pool isdn 192.168.2.1
ip http serverip classless
ip route 0.0.0.0 0.0.0.0...

 
5-15
Cisco 860 and Cisco 880 Series Integrated Services Routers Software Configuration Guide
OL-xxxxx-xx
Chapter 5      Configuring Backup Data Lines and Remote Management
  Configuring the Cellular Wireless Interface
Configuring the Cellular Wireless Interface
To configure the 3G wireless interface, follow these guidelines and procedures:
 Restrictions for Configuring Cellular Wireless Interface
 Configuring Data Account Provisioning
 Configuring a Cellular Interface
 Configuring a GSM Modem Data...

 
5-16
Cisco 860 and Cisco 880 Series Integrated Services Routers Software Configuration Guide
OL-xxxxx-xx
Chapter 5      Configuring Backup Data Lines and Remote Management
  Configuring the Cellular Wireless Interface
2.show cellular 0 hardware
3.show cellular 0 connection
4.show cellular 0 radio
5.show cellular 0 profile
6.show cellular 0 security
7.show cellular 0 all
DETAILED STEPS
Configuring a GSM Modem Data Profile
To configure or create a new modem data profile, enter the following command in...

 
5-17
Cisco 860 and Cisco 880 Series Integrated Services Routers Software Configuration Guide
OL-xxxxx-xx
Chapter 5      Configuring Backup Data Lines and Remote Management
  Configuring the Cellular Wireless Interface
SUMMARY STEPS
1.cellular gsm profile create     
DETAILED STEPS
The following table lists the modem data profile parameters.
CDMA Modem Activation and Provisioning
To activate and provision your modem, follow these procedures: 
 Verifying Signal Strength and Service Availability, page...

 
5-18
Cisco 860 and Cisco 880 Series Integrated Services Routers Software Configuration Guide
OL-xxxxx-xx
Chapter 5      Configuring Backup Data Lines and Remote Management
  Configuring the Cellular Wireless Interface
The following table lists the activation and provisioning processes supported by different wireless 
carriers. 
Manual Activation
NoteYou must have valid mobile directory numner (MDN), mobile subsidy lock (MSL), and mobile station 
identifier (MSID) information from your carrier before...