Cisco Router 860, 880 Series User Manual

 
2-3
Book Title
OL-xxxxx-xx
Chapter 2      Wireless Device Overview
  Management Options
Central Unit in an All-Wireless Network
In an all-wireless network, an access point acts as a stand-alone root unit. The access point is not 
attached to a wired LAN; it functions as a hub linking all stations together. The access point serves as 
the focal point for communications, increasing the communication range of wireless users. 
Figure 2-2 
shows an access point in an all-wireless network.
Figure 2-2 Access...

 
2-4
Book Title
OL-xxxxx-xx
Chapter 2      Wireless Device Overview
  Management Options 

CH A P T E R
 
3-1
Cisco 860 and Cisco 880 Series Integrated Services Routers Software Configuration Guide
OL-xxxxx-xx
3
Basic Router Configuration
This chapter provides procedures for configuring the basic parameters of your Cisco router, including 
global parameter settings, routing protocols, interfaces, and command-line access. It also describes the 
default configuration on startup.
 Interface Ports, page 3-2
 Default Configuration, page 3-2
 Information Needed for Configuration, page 3-4...

 
3-2
Cisco 860 and Cisco 880 Series Integrated Services Routers Software Configuration Guide
OL-xxxxx-xx
Chapter 3      Basic Router Configuration
  Interface Ports
NoteIndividual router models may not support every feature described in this guide. Features that are not 
supported by a particular router are indicated whenever possible.
This chapter includes configuration examples and verification steps, as available.
For complete information on how to access global configuration mode, see the “Entering...

 
3-3
Cisco 860 and Cisco 880 Series Integrated Services Routers Software Configuration Guide
OL-xxxxx-xx
Chapter 3      Basic Router Configuration
  Default Configuration
! enable secret 5 $1$g4y5$NxDeM.0hON6YA51bcfGvN1                                              
enable password ciscocisco                          
! no aaa new-model                
! 
! ! 
! 
no ip routing             no ip cef         
! 
! ! 
! 
! multilink bundle-name authe                         
! 
! archive       
 log config...

 
3-4
Cisco 860 and Cisco 880 Series Integrated Services Routers Software Configuration Guide
OL-xxxxx-xx
Chapter 3      Basic Router Configuration
  Information Needed for Configuration
!control-plane
!
!line con 0
 no modem enable
line aux 0line vty 0 4
 password cisco
 login transport input telnet ssh
!
scheduler max-task-time 5000
!
webvpn cefend
Tech_Pubs1#
Information Needed for Configuration
You need to gather some or all of the following information, depending on your planned network 
scenario,...

 
3-5
Cisco 860 and Cisco 880 Series Integrated Services Routers Software Configuration Guide
OL-xxxxx-xx
Chapter 3      Basic Router Configuration
  Configuring Basic Parameters
AAL5MUX PPP—With this type of encapsulation, you need to determine the PPP-related 
configuration items.
 If you plan to connect over an ADSL or G.SHDSL line:
 –Order the appropriate line from your public telephone service provider. 
For ADSL lines—Ensure that the ADSL signaling type is DMT (also known as ANSI T1.413) 
or DMT...

 
3-6
Cisco 860 and Cisco 880 Series Integrated Services Routers Software Configuration Guide
OL-xxxxx-xx
Chapter 3      Basic Router Configuration
  Configuring Basic Parameters
Configuring Global Parameters
To configure selected global parameters for your router, perform these steps:
For complete information on the global parameter commands, see the Cisco IOS Release 12.4(15)XZ 
documentation set. 
Configuring the Fast Ethernet LAN Interfaces
The Fast Ethernet LAN interfaces on your router are...

 
3-7
Cisco 860 and Cisco 880 Series Integrated Services Routers Software Configuration Guide
OL-xxxxx-xx
Chapter 3      Basic Router Configuration
  Configuring Basic Parameters
 Configuring Fast Ethernet WAN Interface
 Configuring G.SHDSL
Configuring Fast Ethernet WAN Interface
To configure the Fast Ethernet interface on a Cisco 861 or 881 ISR perform these steps, beginning in 
global configuration mode:
Configuring G.SHDSL
To configure G.SHDSL as CPE on the Cisco 888 ISR perform these steps, beginning...

 
3-8
Cisco 860 and Cisco 880 Series Integrated Services Routers Software Configuration Guide
OL-xxxxx-xx
Chapter 3      Basic Router Configuration
  Configuring Basic Parameters
Step 4Router(config-ctrl)# line-mode 4 wire 
standardEnables 4 wire operation.
Step 5Router(config-ctrl)# line-rate 4608Specifies the DSL line rate for the SHDSL port. The 
range is 192 to 2312 kb/s. The default is auto 
(negotiated between the SHDSL port and the 
DSLAM). 
NoteIf different DSL line rates are configured at...