Cisco Router 826 Routers Software Configuration Guide

  
Index
IN-3
Cisco 826, 827, 828, 831, 836, and 837 and Cisco SOHO 76, 77, 78, 91, 96, and 97 Routers Software Configuration Guide
78-14565-03
configuration changes
making
A-5 to A-6
saving5-14, A-7
configuration example(s)
AAL5MUX PPP encapsulation
3-8
AAL5SNAP encapsulation3-7
command-line access3-9
DHCP relay3-22
DHCP server3-21
dynamic routing3-13
H.3233-50 to 3-52
IP EIGRP3-14
IP Precedence3-33
multilink PPP fragmentation and interleaving3-32
NAT3-16
RSVP3-34
static route3-12
configuration...

  
Index
IN-4
Cisco 826, 827, 828, 831, 836, and 837 and Cisco SOHO 76, 77, 78, 91, 96, and 97 Routers Software Configuration Guide
78-14565-03
D
debug atm commands5-8 to 5-11
debug atm errors command5-8
debug atm events command5-9
debug atm packet command5-10 to 5-11
debug commands, ROM monitorB-9
destination-pattern command1-11
dev commandB-3
DHCP
configuring DHCP server
2-39
IP address assignment2-39
DHCP and Easy IP (Phase 2)1-10
DHCP relay
configuration example
3-22
configuring3-22
illustrated3-18...

  
Index
IN-5
Cisco 826, 827, 828, 831, 836, and 837 and Cisco SOHO 76, 77, 78, 91, 96, and 97 Routers Software Configuration Guide
78-14565-03
command-line configuration3-9
configuring PPP over ATM with NAT2-15
DHCP relay configuration3-22
DHCP server configuration3-21
dynamic routing configuration3-13
IP EIGRP configuration3-14
IP Precedence configuration3-33
multilink PPP fragmentation and interleaving 
configuration
3-32
NAT configuration3-16
PPP over ATM with NAT2-13, 2-15 to 2-16
replacing a bridge...

  
Index
IN-6
Cisco 826, 827, 828, 831, 836, and 837 and Cisco SOHO 76, 77, 78, 91, 96, and 97 Routers Software Configuration Guide
78-14565-03
IOS queues1-12
IP
overview
1-3 to 1-4
routing, setting up3-2
IPCP1-9
IP Precedence
with CBWFQ
1-12
configuring3-33, 3-48
overview1-12
ip precedence command3-25, 3-33
ip rsvp bandwidth command3-33
ip rtp reserve command3-32
IPSec3-42
IP Security
See IPSec
K
k commandB-9
L
LCP1-5
LFQ1-13
line configuration modeA-4
Link Control Protocol
See LCP
LLC
1-7
loopback...

  
Index
IN-7
Cisco 826, 827, 828, 831, 836, and 837 and Cisco SOHO 76, 77, 78, 91, 96, and 97 Routers Software Configuration Guide
78-14565-03
P
packets, ATM, displaying5-10
PAP1-5
parameters
addressing, configuring
3-15 to 3-22
global, setting up3-3
QoS, configuration3-24
Password Authentication Protocol
See PAP
password protection
A-5
passwords
recovery
5-11 to 5-14
resetting5-14
settingA-5
permanent virtual circuit
See PVC
permit command
1-13
plain old telephone service
See POTS dial peer...

  
Index
IN-8
Cisco 826, 827, 828, 831, 836, and 837 and Cisco SOHO 76, 77, 78, 91, 96, and 97 Routers Software Configuration Guide
78-14565-03
R
related documentsxiii
req-qos command3-34
reset commandB-3
resetting
configuration register value
5-14
passwords5-14
router5-13
RIP
overview
1-4
ROM monitor
commands
B-2 to B-3
debug commandsB-9
enteringB-1
exitingB-10
overviewB-1
router configuration modeA-4
Routing Information Protocol
See RIP
routing protocol overview
1-4 to 1-5
RST bits1-13
RSVP...

  
Index
IN-9
Cisco 826, 827, 828, 831, 836, and 837 and Cisco SOHO 76, 77, 78, 91, 96, and 97 Routers Software Configuration Guide
78-14565-03
U
ubr3-7, 3-26
UDP
broadcasts, forwarding
3-22
port numbers, currently assignedC-1 to C-2
undoing commandsA-6
unspecified bit rate3-7, 3-26
upgrading software, methods for5-11
User Datagram Protocol
See UDP
user EXEC mode
A-2, A-3
V
variable bit rate non-real time (vbr-nrt)3-7
variable bit rate real time (vbr-rt)3-7
variables, command listingA-5
vbr-nrt3-7...

  
Index
IN-10
Cisco 826, 827, 828, 831, 836, and 837 and Cisco SOHO 76, 77, 78, 91, 96, and 97 Routers Software Configuration Guide
78-14565-03