Cisco Router 826 Routers Software Configuration Guide
Here you can view all the pages of manual Cisco Router 826 Routers Software Configuration Guide. The Cisco manuals for Router are available online for free. You can easily download all the documents as PDF.
Page 191
4-35 Cisco 826, 827, 828, 831, 836, and 837 and Cisco SOHO 76, 77, 78, 91, 96, and 97 Routers Software Configuration Guide 78-14565-03 Chapter 4 Advanced Router Configuration Configuring ATM OAM F5 Continuity Check Support Command Mode Privileged EXEC. Example Output The following example output of the debug atm oam cc command records activity beginning with the entry of the oam-pvc manage cc command, and ending with the entry of the no oam-pvc manage cc command. The ATM 0 interface was...
Page 192
4-36 Cisco 826, 827, 828, 831, 836, and 837 and Cisco SOHO 76, 77, 78, 91, 96, and 97 Routers Software Configuration Guide 78-14565-03 Chapter 4 Advanced Router Configuration Configuring RADIUS Support Configuring RADIUS Support Remote Authentication Dial-In User Service (RADIUS) is supported on the following Cisco routers: Cisco 826 and Cisco 836 Cisco 827, Cisco 827H, Cisco 827-4V, Cisco 831, and Cisco 837 Cisco 828 RADIUS enables you to secure your network against unauthorized access. A...
Page 193
4-37 Cisco 826, 827, 828, 831, 836, and 837 and Cisco SOHO 76, 77, 78, 91, 96, and 97 Routers Software Configuration Guide 78-14565-03 Chapter 4 Advanced Router Configuration Configuring Cisco Easy VPN Client Easy VPN Documentation The release note “Cisco EZVPN Client for the Cisco uBR905/uBR925 Cable Access Routers” contains instructions for configuring the DHCP server pool, the Easy VPN client profile required to implement Easy VPN, contains example configurations for the IPSec server, and...
Page 194
4-38 Cisco 826, 827, 828, 831, 836, and 837 and Cisco SOHO 76, 77, 78, 91, 96, and 97 Routers Software Configuration Guide 78-14565-03 Chapter 4 Advanced Router Configuration Configuring Dial-on-Demand Routing for PPPoE Client network 192.168.100.0 255.255.255.0 default-router 192.168.100.1 ! ip ssh time-out 120 ip ssh authentication-retries 3 ! crypto ipsec client ezvpn hw-client group hw-client-groupname key hw-client-password mode client peer 188.185.0.5 ! interface Ethernet0 ip address...
Page 195
4-39 Cisco 826, 827, 828, 831, 836, and 837 and Cisco SOHO 76, 77, 78, 91, 96, and 97 Routers Software Configuration Guide 78-14565-03 Chapter 4 Advanced Router Configuration Configuring Dial-on-Demand Routing for PPPoE Client Configuring DDR for a PPPoE Client Complete the following tasks to configure DDR for a PPPoE client, beginning in global configuration mode: Step 1Enable vpdn. a.Enter the global configuration mode vpdn enable command. b.Enter no vpdn logging command to disable vpdn...
Page 196
4-40 Cisco 826, 827, 828, 831, 836, and 837 and Cisco SOHO 76, 77, 78, 91, 96, and 97 Routers Software Configuration Guide 78-14565-03 Chapter 4 Advanced Router Configuration Configuring Weighted Fair Queuing Step 6Create a static route for the Dialer 1 interface by entering the ip route 0.0.0.0 0.0.0.0 dialer 1 permanent command. Step 7Enter end to leave router configuration mode. Configuring Weighted Fair Queuing Weighted fair queuing (WFQ) is supported on the following Cisco routers: Cisco...
Page 197
4-41 Cisco 826, 827, 828, 831, 836, and 837 and Cisco SOHO 76, 77, 78, 91, 96, and 97 Routers Software Configuration Guide 78-14565-03 Chapter 4 Advanced Router Configuration Configuring DSL Commands Example Configuration The following configuration applies WFQ to PVC 0/33 on the ATM 0.1 interface. The policy map named wfq is created, and WFQ is applied to the default class referenced in that policy map. Then, wfq is referenced in the ATM 0.1 interface configuration. version 12.2 no service...
Page 198
4-42 Cisco 826, 827, 828, 831, 836, and 837 and Cisco SOHO 76, 77, 78, 91, 96, and 97 Routers Software Configuration Guide 78-14565-03 Chapter 4 Advanced Router Configuration Configuring DSL Commands Configuration Example The following is a configuration example for the dsl command. interface ATM0 no ip address no atm ilmi-keepalive dsl operating-mode auto dsl noise-margin 0 dsl max-tone-bits 14 dsl gain-setting tx-offset 0 dsl gain-setting rx-offset 1 Enabling the DSL Training Log The DSL...
Page 199
4-43 Cisco 826, 827, 828, 831, 836, and 837 and Cisco SOHO 76, 77, 78, 91, 96, and 97 Routers Software Configuration Guide 78-14565-03 Chapter 4 Advanced Router Configuration Configuring DSL Commands b.Enter no dsl enable-training-log to disable the retrieval of the training log. c.Enter end to leave router configuration mode. Selecting Secondary DSL Firmware This command is available on the following routers: Cisco 827, 827H, and 827-4V Cisco 837 routers. The ATM interface mode dsl firmware...
Page 200
4-44 Cisco 826, 827, 828, 831, 836, and 837 and Cisco SOHO 76, 77, 78, 91, 96, and 97 Routers Software Configuration Guide 78-14565-03 Chapter 4 Advanced Router Configuration Configuring DSL Commands After the dsl firmware secondary command is added to the configuration and retraining, the show dsl interface ATM0 output shows that the software version has changed to 3.7123. 827-sus2#sh dsl int atm0 ATU-R (DS) ATU-C (US) Modem Status: Showtime...