Cisco Router 800 Series Software Configuration Guide

 
8-25
Cisco 800 Series Software Configuration Guide
78-5372-06
Chapter 8      Advanced Router Configuration
Configuring IP Control Protocol Subnet Mask Delivery
!
ip classless
no ip http server
!
ip radius source-interface FastEthernet0/0/0
!
radius-server host 192.168.100.100 auth-port 1645 acct-port 1646
radius-server retransmit 3
radius-server attribute nas-port format d
radius-server key foo
!
line con 0
exec-timeout 0 0
transport input none
line aux 0
line vty 0 4
 password lab
!
end
The following...

 
Chapter 8      Advanced Router Configuration
Configuring IP Control Protocol Subnet Mask Delivery
8-26
Cisco 800 Series Software Configuration Guide
78-5372-06 --> cd radius
[ //localhost/Radius ]
    Name = Radius
    Description = 
    Version = 1.6R1
    IncomingScript~ = 
    OutgoingScript~ = 
    DefaultAuthenticationService~ = local-users
    DefaultAuthorizationService~ = local-users
    DefaultAccountingService~ = local-file
    DefaultSessionService~ = 
    DefaultSessionManager~ =...

 
8-27
Cisco 800 Series Software Configuration Guide
78-5372-06
Chapter 8      Advanced Router Configuration
Configuring the Service Assurance Agent
    Current filter:
    default-PPP-users/
    default-SLIP-users/
    default-Telnet-users/
    StaticIP/
    router-8274v-1/
    TB2-8274v-2/
--> cd router-8274v-1
[ //localhost/Radius/Profiles/router-8274v-1 ]
    Name = router-8274v-1
    Description = 
    Attributes/
--> ls
[ //localhost/Radius/Profiles/router-8274v-1 ]
    Name = router-8274v-1...

 
Chapter 8      Advanced Router Configuration
Configuring Secure Shell
8-28
Cisco 800 Series Software Configuration Guide
78-5372-06
Cisco 827, 827H, 827-4V, 831, and 837
Cisco SOHO 77, SOHO 77H, SOHO 78, SOHO 96, and SOHO 97
Cisco 828
The SAA is an application-aware synthetic operation agent that monitors network 
performance by measuring key metrics such as response time, availability, jitter 
(interpacket delay variance), connect time, throughput, and packet loss. This 
feature is intended to...

 
8-29
Cisco 800 Series Software Configuration Guide
78-5372-06
Chapter 8      Advanced Router Configuration
Configuring IP Named Access Lists
Configuring IP Named Access Lists
IP named access lists are supported on the following Cisco routers:
Cisco 806
Cisco 826 and 836
Cisco 827, 827H, 827-4V, 831, and 837
Cisco SOHO 77, SOHO 77H, SOHO 78, SOHO 96, and SOHO 97
Cisco 828 
You can identify IP access lists with an alphanumeric string (name) instead of a 
number. When you use named access lists, you...

 
Chapter 8      Advanced Router Configuration
Configuring International Phone Support
8-30
Cisco 800 Series Software Configuration Guide
78-5372-06
Caller ID devices:
–BRONDI INDOVINO
Fax equipment:
–Canon FAX-B155
The following devices are supported in Denmark:
Telephones:
–Tele Danmark dana classic
–Tele Danmark Danafon Topas 
Caller ID devices:
–DORO Danmark DOROX5
Follow the steps below to configure a voice port to support caller ID, international 
cadence, impedance, and ring frequency,...

 
8-31
Cisco 800 Series Software Configuration Guide
78-5372-06
Chapter 8      Advanced Router Configuration
Configuring International Phone Support
!
voice-port 1
 cptone dk
 caller-id enable
 caller-id block
 timeouts call-disconnect 0
!
voice-port 2
 cptone dk
 caller-id alerting line-reversal
 timeouts call-disconnect 0
International Tone, Cadence, Ring Frequency, and Impedance 
Support
The default voice-port configuration for all voice ports specifies the U.S. country 
code, 600-ohm impedance, and...

 
Chapter 8      Advanced Router Configuration
Configuring International Phone Support
8-32
Cisco 800 Series Software Configuration Guide
78-5372-06
Configuring an FXS Ring Cadence
Use the ring cadence command in voice-port configuration mode to specify the 
ring cadence for a Foreign Exchange Station (FXS) voice port. Use the no form 
of this command to restore the default value for this command.
ring cadence cadence
no ring cadence 
The ring cadence command can take the following values. itItaly POTS...

 
8-33
Cisco 800 Series Software Configuration Guide
78-5372-06
Chapter 8      Advanced Router Configuration
Configuring International Phone Support
Configuring the FXS Voice Port Ring Frequency 
To specify the ring frequency for a specified FXS voice port, use the ring 
frequency command in voice-port configuration mode. Use the no form of this 
command to restore the default value for this command.
ring frequency frequency
no ring frequency
To select the ring frequency, use the commands as follows....

 
Chapter 8      Advanced Router Configuration
Configuring International Phone Support
8-34
Cisco 800 Series Software Configuration Guide
78-5372-06
When using the impedance command, be aware of the following constraints: 
The c600r option selects the current POTS line type 0 implementation. 
The 900r option selects the current POTS line type 1 implementation. 
The 600c, 900c, complex1, and complex2 options select the current POTS 
line type 2 implementation.
International Caller ID Support
Caller ID...