Cisco Rfgw1d Manual

 
  Laser Safety  
78-4025112-01 Rev H0 xix 
 
Laser Safety 
Introduction 
This equipment can be provided with an infrared laser that transmits intensity-
modulated light and emits invisible laser radiation. 
Warning: Radiation  
  WARNING: 
 Avoid personal injury!  Use of controls, adjustments, or performance of 
procedures other than those specified herein may result in hazardous 
radiation exposure. 
 Avoid personal injury!  The laser light source on the equipment emits 
invisible laser radiation....

 
Laser Safety 
xx 78-4025112-01 Rev H0 
The following laser safety precautions are applicable to the equipment.  According to 
the type of optical transmitter inside the equipment, there are different laser safety 
precautions. A laser label that clearly indicates the laser aperture is affixed to the 
equipments rear panel.  
 
The following illustration displays the location of the laser label. 
 
Depending upon whether you are located in Europe (IEC-standard) or in the U.S. 
(CDRH-standard), there are...

 
  Laser Safety  
78-4025112-01 Rev H0 xxi 
 
In Accordance with the CDRH Standard 
The Laser type SFP modules used are classified in class I laser product per CDRH, 21 
CFR 1040 Laser Safety requirements.   
For the CDRH standard, a certification label is attached to the top cover of each 
product classified in class I. See also the product ID label affixed to each product. 
 
 
 
  

 
 
78-4025112-01 Rev H0 1 
 
Overview 
The Cisco® RF Gateway 1 is a universal edge QAM (U-EQAM) device 
that offers industry leading performance, and a standards-based 
solution for video, data, and converged video and data deployments 
requiring high density and maximum reliability. 
Purpose 
This configuration guide provides the necessary information to 
configure the system using the web browser interface. 
Who Should Use This Document 
This document is intended for authorized service personnel who...

 
 
78-4025112-01 Rev H0 3 
 
This chapter provides the basic information needed to quickly 
configure the RF Gateway 1 using the web browser user interface. 
For more information on setting up the RF Gateway 1, see Cisco RF 
Gateway 1 Configuration Guide, part number 78-4025112-01.  
 
 
2 Chapter 2 
RF Gateway 1 Configuration 
Quick Start 
In This Chapter 
 Configuring the IP Address Through the Front Panel ...................... 4 
 Connecting the RF Gateway 1 Using a Web...

 
Chapter 2    RF Gateway 1 Configuration Quick Start  
 
 
4 78-4025112-01 Rev H0 
Configuring the IP Address Through the Front 
Panel 
The RF Gateway 1 management port IP address can be configured using the LCD 
and keypad located on the chassis front panel.   
 
To Configure the Management Port IP Address 
1 After the system fully initializes, use the keypad to page down until you see the 
mgmt port IP address.  
Note: Use the up/down, left/right buttons for navigation and changes.  Use the 
center...

 
 
 Connecting the RF Gateway 1 Using a Web Browser 
 
78-4025112-01 Rev H0 5 
 
Connecting the RF Gateway 1 Using a Web 
Browser 
The RF Gateway 1 can be connected to a web browser. The following 
browsers/display settings are recommended:  
Client Platform Web Browser Display Settings 
Windows XP Mozilla Firefox 2.0.0.14 1024x768 
 Internet Explorer 6.0  
Note: Java platform version 1.6.0_x is supported under the recommended browsers. 
To Connect the RF Gateway 1 
1 Connect a network cable to the...

 
Chapter 2    RF Gateway 1 Configuration Quick Start  
 
 
6 78-4025112-01 Rev H0 
Changing Device Settings 
The general configuration settings of the RF Gateway 1 are categorized on the 
Device Information page. This section provides information on changing the device 
settings. 
Note: Once a setting is entered and you click Apply, they become active.  The 
settings must be saved in order to preserve them in nonvolatile memory. Software 
version 1.3.11 has an automatic save feature which allows applied...