Cisco Prime Nerk 43 User Guide

  
27-207
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  Mobile Technologies Commands: Summary
Create IUPSRight-click the Context> 
Commands> Configuration > 
Mobility> Create IUPSUse this command to create a new IU PS service. 
Delete 
ContextRight-click the Context> 
Commands> Configuration > 
Others > Delete ContextUse this command to delete a context
Create CGWRight-click the Context> 
Commands> Configuration > 
Small Cell> Create CGWUse this command to...

  
27-208
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  Mobile Technologies Commands: Summary
Create 
SaMOGRight-click the Context> 
Commands> Configuration > 
Small Cell> Create SaMOGUse this command to create SaMOG
Delete 
ContextRight-click the Context> 
Commands> Configuration > 
Others > Delete ContextUse this command to delete a context under the 
Logical Inventory node.
Modify 
LicenseRight-click the ASR5k device > 
Commands> Configuration > 
Modify...

  
27-209
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  Mobile Technologies Commands: Summary
Modify HA 
SPI ListRight-click the Context> 
Commands> Configuration> 
Mobility> HA SPI List > 
Modify HA SPI ListUse this command to modify the HA SPI List 
configuration details.
Create HA Right-click the Context> 
Commands> Configuration> 
Mobility> Create HAUse this command to create a new Home Agent 
service.
Delete HA Expand the node Mobile> HA  > 
right-click...

  
27-210
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  Mobile Technologies Commands: Summary
Create Route 
MapRight-click the Context> 
Commands> Configuration> 
Mobility > Route Map and 
Route Access List > Create 
Route MapRoute maps are similar to access lists; they both 
have criteria for matching the details of certain 
packets and an action of permitting or denying 
those packets. Unlike access lists, though, route 
maps can add to each match...

  
27-211
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  Mobile Technologies Commands: Summary
Show DHCPRight-click the Context> 
Commands> DHCPv4> Show> 
Show DHCP
Right-click the Context> 
Commands> DHCPv6> Show> 
Show DHCPv6Use this command to view and confirm the DHCP 
configuration details.
Show EGTPContext> Mobile > EGTP > 
right-click the ETP service 
Commands> Show> Show 
EGTPUse this command to view and confirm the EGTP 
configuration details.
Show...

  
27-212
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  Monitoring the Mobility Management Entity
Monitoring the Mobility Management Entity
Mobility Management Entity (MME) is the key control-node for an LTE access network, which works 
in conjunction with NodeB(eNodeB), Serving Gateway, or the LTE/SAW core network. It is responsible 
for initiating paging and authentication of mobile devices. It keeps location information at the Tracking 
Area Level for...

  
27-213
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  Monitoring the Mobility Management Entity
Figure 27-22 depicts the topology of the LTE network along with MME:
Figure 27-22 MME Topology
The different features of the MME are listed below:
Involved in bearer activation/deactivation
Provides P-GW selection to the subscriber to connect to PDN
Tracks the UE for idle mode and paging procedures, including transmissions
Chooses the S-GW for a UE during...

  
27-214
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  Monitoring the Mobility Management Entity
S1-MME Interface—The interface used by MME to communicate with eNodeBs on the same 
PLMN. This interface is the reference point for the control plane protocol between eNodeB and 
MME, this interface uses the S1 Application Protocol (SI-AP) instead of the Stream Control 
Transmission Protocol (SCTP) as the transport layer protocol for guaranteed delivery of...

  
27-215
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  Monitoring the Mobility Management Entity
Figure 27-23 MME Configuration Details
Table 27-134 displays the MME service details. 

  
27-216
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  Monitoring the Mobility Management Entity
Table 27-134 MME Service Details
Field Description
Service Name The unique name of the MME service.
Status The status of the MME service, which can be any one of the following:
Unknown
Initiated
Running
Down
Started
Not Started
MME Group ID The unique ID of the group to which the MME service belongs to.
MME Code The unique code for the MME service.
EGTP  Service...