Cisco Prime Nerk 43 User Guide

 
26-17
Cisco Prime Network 4.3.2 User Guide
Chapter 26      Managing Mobile Transport Over Pseudowire (MToP) Networks
  Viewing Channelization Properties
For T1 or E1 entries, the TDM properties presented in Table 26-7 are displayed in physical inventory in 
addition to the existing T1 or E1 properties.
Viewing Channelization Properties
Prime Network supports the channelization of SONET/SDH and T3 4.3.2. When a line is channelized, 
it is logically divided into smaller bandwidth channels called paths....

 
26-18
Cisco Prime Network 4.3.2 User Guide
Chapter 26      Managing Mobile Transport Over Pseudowire (MToP) Networks
  Viewing Channelization Properties
Viewing SONET/SDH Channelization Properties
SONET and SDH use the same concepts for channelization, but the terminology differs. Table 26-8 
describes the equivalent terms for SONET and SDH channelization. The information displayed in the 
Vision client reflects whether SONET or SDH is configured on the interface.
To view SONET/SDH channelization...

 
26-19
Cisco Prime Network 4.3.2 User Guide
Chapter 26      Managing Mobile Transport Over Pseudowire (MToP) Networks
  Viewing Channelization Properties
Step 3To view additional information about a channelized path, double-click the required entry in the 
Description column. The SONET/SDH High Order Path Properties window is displayed as shown in 
Figure 26-11. 
Table 26-9 SONET/SDH and OC3 Properties
Field Description
SONET/SDH High Order Path (HOP) Area
Description SONET/SDH path description...

 
26-20
Cisco Prime Network 4.3.2 User Guide
Chapter 26      Managing Mobile Transport Over Pseudowire (MToP) Networks
  Viewing Channelization Properties
Figure 26-11 SONET/SDH High Order Path Properties Window
Table 26-10 describes the information displayed in SONET/SDH High Order Path Properties window. 
Table 26-10 SONET/SDH High Order Path Properties
Field Description
Description SONET/SDH path description including the interface and high order 
path. Double-click an entry to view additional details...

 
26-21
Cisco Prime Network 4.3.2 User Guide
Chapter 26      Managing Mobile Transport Over Pseudowire (MToP) Networks
  Viewing Channelization Properties
Viewing T3 DS1 and DS3 Channelization Properties
To view T3 DS1 and DS3 channelization properties: 
Step 1In the Vision client, right-click the required device, then choose Inventory. 
Step 2Choose Physical Inventory > Chassis >slot>subslot>T3-interface. 
Figure 26-12 shows DS1 channelization properties for T3 in physical inventory.
Figure 26-12 T3 DS1...

 
26-22
Cisco Prime Network 4.3.2 User Guide
Chapter 26      Managing Mobile Transport Over Pseudowire (MToP) Networks
  Viewing Channelization Properties
Table 26-11 describes the information that is displayed for Channelized DS1 and DS3 in the content 
pane. 
Table 26-11 Channelized DS1 and DS3 Properties
Field Description
Channelized DS1 Table
Description Path description including the physical interface and the channel 
number. Double-click an entry to view additional details about the path....

 
26-23
Cisco Prime Network 4.3.2 User Guide
Chapter 26      Managing Mobile Transport Over Pseudowire (MToP) Networks
  Viewing Channelization Properties
Step 3To view additional information about a DS1channelized path, double-click the required entry in the 
Channelized DS1 table. Figure 26-13 shows the information that is displayed in the Channelized DS1 
PDH Properties window. 
DS3 Area
Admin Status Administrative status of the DS3 line. 
Oper Status Operational status of the DS3 line.
Port Type Type...

 
26-24
Cisco Prime Network 4.3.2 User Guide
Chapter 26      Managing Mobile Transport Over Pseudowire (MToP) Networks
  Viewing Channelization Properties
Figure 26-13 Channelized DS1 PDH Properties Window
Table 26-12 describes the information that is displayed in the Channelized DS1 PDH Properties window. 
Table 26-12 Channelized DS1 PDH Properties Window
Field Description
Location Area
Description Path description including the physical interface and the channel 
number. 
Channelization Type of...

 
26-25
Cisco Prime Network 4.3.2 User Guide
Chapter 26      Managing Mobile Transport Over Pseudowire (MToP) Networks
  Viewing MLPPP Properties
Viewing MLPPP Properties
Multilink PPP (MLPPP) is a protocol that connects multiple links between two systems as needed to 
provide bandwidth when needed. MLPPP packets are fragmented, and the fragments are sent at the same 
time over multiple point-to-point links to the same remote address. MLPPP provides bandwidth on 
demand and reduces transmission latency...

 
26-26
Cisco Prime Network 4.3.2 User Guide
Chapter 26      Managing Mobile Transport Over Pseudowire (MToP) Networks
  Viewing MLPPP Properties
Figure 26-14 MLPPP Properties in Logical Inventory