Cisco Prime Nerk 43 User Guide

 
25-9
Cisco Prime Network 4.3.2 User Guide
OL-31018-01
Chapter 25      Monitoring BNG Configurations
  Working with BNG Configurations
Prime Network supports the following types of dynamic templates:
IP subscriber templates
PPP templates
Service templates
To view the configuration templates:
Step 1Right-click on the device and choose the Inventory option. 
Step 2In the Inventory window, choose Logical Inventory>Dynamic Config Templates > IP Subscriber 
Te m p l a t e s or PPP template or Service...

 
25-10
Cisco Prime Network 4.3.2 User Guide
OL-31018-01
Chapter 25      Monitoring BNG Configurations
  Working with BNG Configurations
Viewing the Settings for a PPP Template
In addition to the above details, you can also view the following settings for a PPP template:
IPCP Settings
LCP Settings
Authentication Settings
PPP Timeout Settings
To view the settings:
Step 1Right-click on the device and choose the Inventory option. 
Step 2In the Inventory window, choose Logical Inventory>Dynamic Config...

 
25-11
Cisco Prime Network 4.3.2 User Guide
OL-31018-01
Chapter 25      Monitoring BNG Configurations
  Working with BNG Configurations
LCP Settings tab
Delay The time period (in seconds or milliseconds) to delay before starting 
active LCP negotiations.
ReNegotiation Enabled Indicates whether the attempts by the peer to renegotiate LCP is 
enabled.
Authentication Settings tab
Authentication Type The PPP link authentication method, which can be any one of the 
following:
chap
ms-chap
pap
Chap Host Name...

 
25-12
Cisco Prime Network 4.3.2 User Guide
OL-31018-01
Chapter 25      Monitoring BNG Configurations
  Working with BNG Configurations 

CH A P T E R
 
26-1
Cisco Prime Network 4.3.2 User Guide
26
Managing Mobile Transport Over Pseudowire 
(MToP) Networks
Ciscos Mobile Transport over Pseudowire (MToP) solution builds an MPLS cloud between the 
distribution nodes (between access and aggregation), and the aggregation nodes on the network edge. 
The MPLS network is also extended over the point-to-point links from the distribution nodes either via 
Ethernet, serial, microwave, or a Layer 2 access network. Figure 26-1 provides an example of a...

 
26-2
Cisco Prime Network 4.3.2 User Guide
Chapter 26      Managing Mobile Transport Over Pseudowire (MToP) Networks
  Viewing SAToP Pseudowire Type in Logical Inventory
Viewing Virtual Connection Properties, page 26-5
Viewing IMA Group Properties, page 26-13
Viewing TDM Properties, page 26-16
Viewing Channelization Properties, page 26-17
Viewing MLPPP Properties, page 26-25
Viewing MLPPP Link Properties, page 26-29
Viewing MPLS Pseudowire Over GRE Properties, page 26-31
Network Clock Service Overview,...

 
26-3
Cisco Prime Network 4.3.2 User Guide
Chapter 26      Managing Mobile Transport Over Pseudowire (MToP) Networks
  Viewing CESoPSN Pseudowire Type in Logical Inventory
Figure 26-2 SAToP Pseudowire Type in Logical Inventory
Step 4
To view the physical inventory for the port, click the hypertext port link.
Viewing CESoPSN Pseudowire Type in Logical Inventory 
Circuit Emulation Services over PSN (CESoPSN) is a method for encapsulating structured (NxDS0) 
TDM signals as pseudowires over packet-switching...

 
26-4
Cisco Prime Network 4.3.2 User Guide
Chapter 26      Managing Mobile Transport Over Pseudowire (MToP) Networks
  Viewing CESoPSN Pseudowire Type in Logical Inventory
To view TDM properties for Circuit Emulation (CEM) groups in the Vision client: 
Step 1In the Vision client, right-click the device on which CESoPSN is configured, then choose Inventory. 
Step 2In the Inventory window, choose Logical Inventory > Pseudowires. 
Step 3In the Tunnel Edges table, select the required entry and scroll...

 
26-5
Cisco Prime Network 4.3.2 User Guide
Chapter 26      Managing Mobile Transport Over Pseudowire (MToP) Networks
  Viewing Virtual Connection Properties
Viewing Virtual Connection Properties
The following topics describe how to view properties related to virtual connections: 
Viewing ATM Virtual Connection Cross-Connects, page 26-6
Viewing ATM VPI and VCI Properties, page 26-10
Viewing Encapsulation Information, page 26-11
Buttons for viewing these properties are available at the top of the physical...

 
26-6
Cisco Prime Network 4.3.2 User Guide
Chapter 26      Managing Mobile Transport Over Pseudowire (MToP) Networks
  Viewing Virtual Connection Properties
Viewing ATM Virtual Connection Cross-Connects 
ATM networks are based on virtual connections over a high-bandwidth medium. By using 
cross-connects to interconnect virtual path or virtual channel links, it is possible to build an end-to-end 
virtual connection. 
An ATM cross-connect can be mapped at either of the following levels:
Virtual...