Cisco Prime Nerk 43 User Guide

  
9-33
Cisco Prime Network 4.3.2 User Guide
Chapter 9      Manage Device Configurations and Software Images
  Managing Device Configurations
This topic explains how to perform a manual backup. CCM also performs automatic backups according 
to the specifications on the Global Settings page (see Checking Prime Network Global Settings for CCM 
Operations, page 3-4). Manual backups do not affect the automatic backups that are controlled from the 
Global Settings page; they are completely independent of each...

  
9-34
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 9      Manage Device Configurations and Software Images
  Managing Device Configurations
Step 2Choose the devices with files you want to back up.
Figure 9-7 Configuration Backup Page
Step 3
To choose devices from a specific device group, click Select Groups. Click the hyperlinked device group 
name to view the list of devices that belong to the group. 
Step 4Select the required device group in the Device Groups page and click OK. The...

  
9-35
Cisco Prime Network 4.3.2 User Guide
Chapter 9      Manage Device Configurations and Software Images
  Managing Device Configurations
Step 8Click the hyperlinked Click here to open the Configuration Management Jobs page or click OK to close 
and return to the Configuration Backup page.
NoteIf a backup is scheduled for an entire device group and if there is a change in the group by 
addition or deletion of devices after job creation, CCM updates the job accordingly such that all 
the devices...

  
9-36
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 9      Manage Device Configurations and Software Images
  Managing Device Configurations
Figure 9-10 Include Archive Details
If you clear the Include Archive Details check box, the Export Result report will have only the current 
job details
Step 12Click OK to close and return to the Configuration Management Jobs page. 
Fixing a Live Device Configuration (Restore)
CCM performs the configuration restore operation in either overwrite or...

  
9-37
Cisco Prime Network 4.3.2 User Guide
Chapter 9      Manage Device Configurations and Software Images
  Managing Device Configurations
If you selected all the entries in a page, and then deselected one or few options from the selection, and 
then move to the subsequent pages to select all the devices from the Devices (in the table headline), the 
selection in the previous page disappears. 
Before You Begin
Make sure you have installed Flash Player version 10 or higher to view the Configuration...

  
9-38
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 9      Manage Device Configurations and Software Images
  Managing Device Configurations
NoteIf you selected non-Cisco or OLT (GPON) devices, the Edit Config button is disabled.
Figure 9-12 Configuration Edit
Edit the configuration 4.3.2, as required. Note the following:
To remove a command, add no in front of the command.
To update a command, add no in front of the command and then add the new command.
Step 5Click Restore. The Config...

  
9-39
Cisco Prime Network 4.3.2 User Guide
Chapter 9      Manage Device Configurations and Software Images
  Managing Device Configurations
Step 8Click Restore. CCM schedules the job and redirects you to the Jobs page, where you can monitor the 
status of the job.
Cleaning Up the Archive
Deleting a file removes it from the archive. You cannot delete an archived file if:
It is marked “do not purge.”
Deleting it would bring the number of versions below the minimum number of versions that must 
be...

  
9-40
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 9      Manage Device Configurations and Software Images
  Making Sure Devices Conform to Policies Using Compliance Audit
Figure 9-13 Configuration Change Logs
The Configuration Change Logs page displays change information, sorted according to the latest time 
stamp. (For a description of common fields, see Managing Device Configurations, page 9-26.) The date 
and time stamps are displayed according to the local time zone settings of the...

  
9-41
Cisco Prime Network 4.3.2 User Guide
Chapter 9      Manage Device Configurations and Software Images
  Making Sure Devices Conform to Policies Using Compliance Audit
still be available from CCM. 
Compliance Audit ensures that existing device configurations comply to your deployment’s policies. 
Using Compliance Audit, you can create policies that can contain multiple rules, and policies can be 
grouped together to create a policy profile which can be run on a set of devices, called audit of...

  
9-42
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 9      Manage Device Configurations and Software Images
  Making Sure Devices Conform to Policies Using Compliance Audit
Creating a Policy
Create a policy by choosing Compliance Audit > Compliance Policies. The Compliance Policy page 
(Figure 9-14) appears.
Figure 9-14 Compliance Policy Page
You can either create a new policy or you can import an existing policy by clicking the Import icon. You 
can export existing policies as XML files to...