Home > Cisco > Interface > Cisco Ise 14 User Guide

Cisco Ise 14 User Guide

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Cisco Ise 14 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 53 Cisco manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 232
    Add page 131 to Favourites
    image text
    Enable zoom 
    							NICCount:1NIC0:DeviceName:eth0NIC0:HWAddress:00:0C:29:6A:88:C4NIC0:DriverDescr:eth0:registeredasPCnet/PCIII79C970A(*)HardDiskCountmaybeLogical.ise/admin#
Cisco Identity Services Engine CLI Reference Guide, Release 1.4    
123
Cisco ISE CLI Commands in EXEC Show Mode
show inventory
    Add page 132 to Favourites
    image text
    Enable zoom 
    							show ip
TodisplaytheIProuteinformation,usetheshowipcommandinEXECmode.
showiproute
Syntax DescriptionDisplaysIProuteinformation.route
Command DefaultNodefaultbehaviororvalues.
Command ModesEXEC
Usage GuidelinesThiscommanddisplaystheIProutingtable.
Example
ise/admin#showiprouteKernelIProutingtableDestinationGatewayGenmaskFlagsMetricRefUseIface172.21.79.00.0.0.0255.255.255.0U000eth00.0.0.0172.21.79.10.0.0.0UG000eth0ise/admin#
   Cisco Identity Services Engine CLI Reference Guide, Release 1.4
124
Cisco ISE CLI Commands in EXEC Show Mode
show ip
    Add page 133 to Favourites
    image text
    Enable zoom 
    							show logging
Todisplaythestateofsystemlogging(syslog)andthecontentsofthestandardsystemloggingbuffer,use
theshowloggingcommandinEXECmode.
showlogging>file-name
showloggingapplicationapplication-logfile-name
showloggingcontainertc-nac{container-idcontainer-id[log-namename-of-log-filetail]|container-name
container-name}
showlogginginternal
showloggingsystemsystem-logfile-name
Syntax DescriptionRedirectsoutputtoafile.>
Nameofthefiletoredirectsystemlogginginformation.file-name
Displaysapplicationlogs.application
Nameoftheapplicationlogfile.application-logfile-name
DisplaystheThreatCentric-NACcontainers.containertc-nac
Displaysthelogfilesrelatedtothespecifiedcontainer(TC-NAC
adapter).
container-idcontainer-id[log-name
name-of-log-filetail]
Displaysthelogfilesrelatedtothespecifiedcontainer(TC-NAC
adapter).
container-namecontainer-name
Displaysthesyslogconfiguration.internal
Displayssystemsyslogs.system
Nameofthesystemlogfile.system-logfile-name
Nameofthesystemlogfilename.system-file-name
Cisco Identity Services Engine CLI Reference Guide, Release 1.4    
125
Cisco ISE CLI Commands in EXEC Show Mode
show logging
    Add page 134 to Favourites
    image text
    Enable zoom 
    							Outputmodifiervariables:
•begin—Matchedpattern.Supportsupto80alphanumeric
characters.
•count—Countthenumberoflinesintheoutput.Addnumber
afterthewordcount.
•end—Endwithlinethatmatches.Supportsupto80
alphanumericcharacters.
•exclude—Excludelinesthatmatch.Supportsupto80
alphanumericcharacters.
•include—Includelinesthatmatch.Supportsupto80
alphanumericcharacters.
•last—Displaylastfewlinesofoutput.Addnumberafterthe
wordlast.Supportsupto80linestodisplay.Default10.
|
Command DefaultNodefaultbehaviororvalues.
Command ModesEXEC
Usage GuidelinesThiscommanddisplaysthestateofsyslogerrorandeventlogging,includinghostaddresses,andforwhich,
loggingdestinations(console,monitor,buffer,orhost)loggingisenabled.
Example 1
ise/admin#showloggingsystem0Feb25201315:57:43tallylog1781Feb26201302:01:02maillog4690Feb26201302:40:01cron0Feb25201315:56:54spooler0Feb25201316:10:03boot.log0Feb25201316:00:03btmp38784Feb26201302:19:48wtmp16032Feb26201302:19:47faillog32947Feb26201300:38:02dmesg63738Feb26201302:19:49messages146292Feb26201302:19:48lastlog13877Feb26201301:48:32rpmpkgs129371Feb26201302:40:22secure27521Feb25201316:10:02anaconda.syslog345031Feb25201316:10:02anaconda.log0Jul28201100:56:37mail/statistics1272479Feb26201302:42:52ade/ADE.log567306Feb26201302:40:22audit/audit.log24928Feb26201302:40:01sa/sa260Feb25201316:01:40pm/suspend.logise/admin#
   Cisco Identity Services Engine CLI Reference Guide, Release 1.4
126
Cisco ISE CLI Commands in EXEC Show Mode
show logging
    Add page 135 to Favourites
    image text
    Enable zoom 
    							Example 2
ToviewapplicationlogfilesonCiscoISEnodes,usethefollowingcommand:
ise/admin#showloggingapplication61Oct07201603:02:43dbalert.log4569Oct07201603:21:18ad_agent.log0Oct07201603:13:18ise-elasticsearch_index_indexing_slowlog.log0Oct07201603:02:59edf.log124Oct07201603:21:59diagnostics.log8182Oct07201603:26:45caservice.log426Oct07201603:19:17redis.log1056Oct07201603:13:07caservice_bootstrap.log49637Oct07201603:27:40passiveid-mgmt.log0Oct07201603:02:59passiveid.log0Oct07201603:13:18ise-elasticsearch_index_search_slowlog.log14152Oct07201603:26:03collector.log0Oct07201603:02:59idc-endpoint.log134Oct07201603:22:34ocsp.log0Oct07201603:02:59dbconn.log0Oct07201603:02:59idc-kerberos.log100958Oct07201603:24:43crypto.log0Oct07201603:02:59idc-syslog.log0Oct07201603:02:59replication.log.2016-10-04.110394Oct07201603:24:01guest.log0Oct07201603:02:59guest.log.2016-10-07.10Oct07201603:02:59vcs.log.2016-10-04.1288624Oct07201603:27:25ise-psc.logise/admin#
Cisco Identity Services Engine CLI Reference Guide, Release 1.4    
127
Cisco ISE CLI Commands in EXEC Show Mode
show logging
    Add page 136 to Favourites
    image text
    Enable zoom 
    							show logins
Todisplaythestateofsystemlogins,usetheshowloginscommandinEXECmode.
showloginscli
Syntax DescriptionListsthecliloginhistory.cli
Command DefaultNodefaultbehaviororvalues.
Command ModesEXEC
Usage GuidelinesRequirestheclikeyword;otherwise,anerroroccurs.
Example
ise/admin#showloginscliadminpts/010.77.137.60FriAug609:45stillloggedinadminpts/010.77.137.60FriAug608:56-09:30(00:33)adminpts/010.77.137.60FriAug607:17-08:43(01:26)rebootsystemboot2.6.18-164.el5PAThuAug518:17(17:49)admintty1ThuAug518:15-down(00:00)rebootsystemboot2.6.18-164.el5PAThuAug518:09(00:06)setuptty1ThuAug517:43-18:07(00:24)rebootsystemboot2.6.18-164.el5PAThuAug516:05(02:02)wtmpbeginsThuAug516:05:362010ise/admin#
   Cisco Identity Services Engine CLI Reference Guide, Release 1.4
128
Cisco ISE CLI Commands in EXEC Show Mode
show logins
    Add page 137 to Favourites
    image text
    Enable zoom 
    							show memory
Todisplaythememoryusageofallrunningprocesses,usetheshowmemorycommandinEXECmode.
Thiscommandhasnokeywordsandarguments.
showmemory
Command DefaultNodefaultbehaviororvalues.
Command ModesEXEC
Usage GuidelinesToviewusedmemory,usetheshowmemorycommand.
Example
ise/admin#showmemorytotalmemory:4394380kBfreememory:206060kBcached:1111752kBswap-cached:9072kB
outputoffreecommand:totalusedfreesharedbufferscachedMem:4394380418857620580401475041111748-/+buffers/cache:29293241465056Swap:81851081927287992380ise/admin#
Cisco Identity Services Engine CLI Reference Guide, Release 1.4    
129
Cisco ISE CLI Commands in EXEC Show Mode
show memory
    Add page 138 to Favourites
    image text
    Enable zoom 
    							show ntp
ToshowthestatusoftheNetworkTranslationProtocol(NTP)associations,usetheshowntpcommandin
EXECmode.
Thiscommandhasnokeywordsandarguments.
showntp
Command DefaultNodefaultbehaviororvalues.
Command ModesEXEC
Usage GuidelinesToviewtheNetworkTranslationProtocol(NTP)associations,usetheshowntpcommand.
Example
ise/admin#showntpPrimaryNTP:ntp.esl.cisco.comSecondaryNTP:171.68.10.150TertiaryNTP:171.68.10.80synchronisedtolocalnetatstratum11timecorrecttowithin11mspollingserverevery128sremoterefidsttwhenpollreachdelayoffsetjitter==============================================================================*127.127.1.0.LOCL.10l9643770.0000.0000.001171.68.10.80.RMOT.16u116400.0000.0000.000171.68.10.150.INIT.16u116400.0000.0000.000
Warning:Outputresultsmayconflictduringperiodsofchangingsynchronization.ise/admin#
Related CommandsDescriptionCommand
ntp
ntpserver
   Cisco Identity Services Engine CLI Reference Guide, Release 1.4
130
Cisco ISE CLI Commands in EXEC Show Mode
show ntp
    Add page 139 to Favourites
    image text
    Enable zoom 
    							show ports
Todisplayinformationaboutallprocesseslisteningonactiveports,usetheshowportscommandinEXEC
mode.
showports>file-name
Syntax DescriptionRedirectsoutputtoafile.>
Nameofthefiletoredirect.file-name
Outputmodifiervariables:
•begin—Matchedpattern.Supportsupto80alphanumericcharacters.
•count—Countthenumberoflinesintheoutput.Addnumberafter
thewordcount.
|—Outputmodifiervariablesforcount.
•end—Endwithlinethatmatches.Supportsupto80alphanumeric
characters.
•exclude—Excludelinesthatmatch.Supportsupto80alphanumeric
characters.
•include—Includelinesthatmatch.Supportsupto80alphanumeric
characters.
•last—Displaylastfewlinesofoutput.Addnumberaftertheword
last.Supportsupto80linestodisplay.Default10.
|—Outputmodifiervariablesforlast.
\
Command DefaultNodefaultbehaviororvalues.
Command ModesEXEC
Usage GuidelinesWhenyouruntheshowportscommand,theportmusthaveanassociatedactivesession.
Example
ise/admin#showportsProcess:java(22648)tcp:0.0.0.0:9024,127.0.0.1:2020,0.0.0.0:9060,0.0.0.0:37252,127.0.0.1:8005,0.0.0.0:9990,0.0.0.0:8009,0.0.0.0:8905,0.0.0.0:5514,0.0.0.0:1099,0.0.0.0:61616,0.0.0.0:80,127.0.0.1:8888,0.0.0.0:9080,0.0.0.0:62424,0.0.0.0:8443,0.0.0.0:443,0.0.0.0:8444udp:172.21.79.91:1812,172.21.79.91:1813,172.21.79.91:1700,0.0.0.0:48425,172.21.79.91:8905,172.21.79.91:3799,0.0.0.0:54104,172.21.79.91:57696,172.2
Cisco Identity Services Engine CLI Reference Guide, Release 1.4    
131
Cisco ISE CLI Commands in EXEC Show Mode
show ports
    Add page 140 to Favourites
    image text
    Enable zoom 
    							1.79.91:1645,172.21.79.91:1646Process:timestenrepd(21516)tcp:127.0.0.1:56513,0.0.0.0:51312Process:timestensubd(21421)tcp:127.0.0.1:50598Process:rpc.statd(3042)tcp:0.0.0.0:680udp:0.0.0.0:674,0.0.0.0:677Process:ttcserver(21425)tcp:0.0.0.0:53385,127.0.0.1:49293Process:timestensubd(21420)tcp:127.0.0.1:51370Process:redis-server(21535)tcp:0.0.0.0:6379Process:portmap(2999)tcp:0.0.0.0:111udp:0.0.0.0:111Process:Decap_main(22728)--More--
   Cisco Identity Services Engine CLI Reference Guide, Release 1.4
132
Cisco ISE CLI Commands in EXEC Show Mode
show ports
    All Cisco manuals Comments (0)