Cisco 881w Manual

 
A-3
Cisco Integrated Services Router Hardware Installation Guide
 
Appendix A      Technical Specifications
  Cisco 810 Series
Radio Immunity EN301 489-1, EN 301 489-7, and EN301 489-24
Transportation/Storage Conditions
Temperature –40 to158 °F (–40 to 70°C)
Humidity 5–95%
Altitude 4570 m (15,000 ft)
AC Power Adapter
Power Source 100–240 VAC
In-ceiling Plenum  No
IP41 No
Extended Shock-vibe No
Maximum Power Consumption 25 W
Maximum Output Power Rating 20 W
Operating Temperature –13 to 140 °F (–25 to 60...

 
A-4
Cisco Integrated Services Router Hardware Installation Guide
 
Appendix A      Technical Specifications
  Cisco 810 Series
Mean Time Between Failure Ground Benign Environment
Ta b l e A - 2 lists the Mean Time Between Failure (MTBF) values for Cisco 812 ISRs. The MTBF is 
calculated based on the Ground Benign condition. The values may be adjusted based on the different 
router usage.
Cisco 819 Series
This section provides router, port, cabling specifications, and power adapters for the Cisco 812...

 
A-5
Cisco Integrated Services Router Hardware Installation Guide
 
Appendix A      Technical Specifications
  Cisco 810 Series
Table A-3 Cisco 819 ISR Specifications
DescriptionHardened Design 
Specification 
(Cisco 819HG and Cisco 
819HG-4G ISRs)Non-Hardened Design 
Specifications
(Cisco 819G and Cisco 
819G-4G ISRs)Hardened Design Specifications
(C819HGW and C819HWD ISRs)
Physical Characteristics
Dimensions (H x W x D) 1.73 x 7.7 x 8.1 in 
(44 x 196 x 206 mm)1.67 x 7.7 x 7.2 in 
(42 x 196 x 183...

 
A-6
Cisco Integrated Services Router Hardware Installation Guide
 
Appendix A      Technical Specifications
  Cisco 810 Series
Standard Safety 
CertificationsUL 60950-1, 2nd edition; CAN/CSA C22.2 No. 60950-1, 
2nd edition, EN 60950-1, 2nd edition; CB to IEC 
60950-1, 2nd edition with all group differences and 
national deviationsUL 60950-1, 2nd edition; 
CAN/CSA C22.2 No. 60950-1, 2nd 
edition, EN 60950-1, 2nd edition; 
CB to IEC 60950-1, 2nd edition 
with all group differences and 
national...

 
A-7
Cisco Integrated Services Router Hardware Installation Guide
 
Appendix A      Technical Specifications
  Cisco 810 Series
Altitude Operating: –500 to 10,000 ft, de-rating operating temperature 1°C per 1,000 feet
Non-operating: –1,000 to 30,000 ft
Cable Length Input cable: 1 m
Output cable: 1.3 m
Inrush Current 50 A @ 25°C
Temperature Operating: –30 to 60°C, still air condition
Non-operating: –40 to 85°C
Humidity Operating: 10% to 95%, non-condensing
Non-operating: 10% to 95%, non-condensing...

 
A-8
Cisco Integrated Services Router Hardware Installation Guide
 
Appendix A      Technical Specifications
  Cisco 810 Series
Mean Time Between Failure Ground Benign Environment
Ta b l e A - 4 lists the Mean Time Between Failure (MTBF) values for Cisco 819 ISRs. The MTBF is 
calculated based on the Ground Benign condition. The values may be adjusted based on the different 
router usage.
Antenna (Diversity and Antenna 3G-ANTM1919D)
Antenna Dimensions 7.63 x 0.94 x 0.63 in (19.38 x 2.39 x 1.60 cm)...

 
A-9
Cisco Integrated Services Router Hardware Installation Guide
 
Appendix A      Technical Specifications
  Cisco 810 Series
Supported Power Adapters
Ta b l e A - 5 and Ta b l e A - 6 list the supported power adapters for Cisco 819 ISRs. The PWR1 AC and DC 
adapters uses molex connector while PWR2 uses barrel-type connector.C819HGW-S-A-K9
C819HGW-V-A-K9220,000
C819HGW+7-E-K9
C819HGW+7-N-K9
C819HGW+7-A-A-K9293,000
C819HWD-E-K9
C819HWD-A-K9630,000
C819H-K9 1,000,000
Cisco 819HG-4G and Cisco 819G-4G...

 
A-10
Cisco Integrated Services Router Hardware Installation Guide
 
Appendix A      Technical Specifications
  Cisco 810 Series
Martek MBRH 0500-D/Q21 72 VDC — Yes
Martek MBRH 0500-D/2Q21 24 VDC Yes Yes
Martek MBRH 0500-D/2Q21 52 VDC Yes Yes
Martek MBRH 0500-D/2Q21 72 VDC Yes Yes
Martek MBRH 0500-D/2Q21 110 VDC Yes Yes
Martek MBRH 0500-B/Q22 24 VDC Yes —
Martek MBRH 0500-C/Q22 52 VDC Yes —
Martek MBRH 0500-D/Q22 72 VDC Yes —
Martek MBRH 0500-D/2Q22 24 VDC Yes Yes
Martek MBRH 0500-D/2Q22 52 VDC Yes Yes...

 
A-11
Cisco Integrated Services Router Hardware Installation Guide
 
Appendix A      Technical Specifications
  Cisco 860, 880, 890 Series
Cisco 860, 880, 890 Series
This section provides router, port, and cabling specifications for the Cisco 860 series, Cisco 880 series, 
and Cisco 890 series ISRs. It contains the following topics:
Router Specifications, page A-12
Wireless Access Point, page A-22
FE and GE Port Pinouts, page A-23
Console and Auxiliary Port Connector Pinouts, page A-24
FXS and FXO Port...

 
A-12
Cisco Integrated Services Router Hardware Installation Guide
 
Appendix A      Technical Specifications
  Cisco 860, 880, 890 Series
G.SHDSL Port Connector Pinouts, page A-25
Data BRI Port Connector Pinouts, page A-26
Voice ISDN BRI Interface Pin Numbers and Functions, page A-27
SFP Port Connector Pinouts, page A-27
Cable Specifications, page A-28
WarningUltimate disposal of this product should be handled according to all national laws and regulations. 
Statement 1040
NoteFor compliance and safety...