Cisco 4507re Manual

A-43
Catalyst 4500 E-Series Switches Installation Guide
OL-13972-02
Appendix A      Power Supply Specifications
  9000 W AC-Input Power Supply
9000 W AC-Input Power Supply
The 9000 W AC-input power supply (PWR-C45-9000ACV), shown in Figure A-10, is supported by the 
following Catalyst 4500 E-series switch chassis:
•Catalyst 4503-E
•Catalyst 4506-E
•Catalyst 4507R-E
•Catalyst 4510R-E
•Catalyst 4507R+E
•Catalyst 4510R+E
Figure A-10 9000 W AC_Input Power Supply Features
1Power supply status LEDs5AC in...

A-44
Catalyst 4500 E-Series Switches Installation Guide
OL-13972-02
Appendix A      Power Supply Specifications
  9000 W AC-Input Power Supply
9000 W Power Supply Specifications
Ta b l e A - 3 5 lists the specifications for the 9000 W AC-input power supply.
Table A-35 9000 W AC-Input Power Supply Specifications
Item Specification
AC-input type  Autoranging inputs with power factor correction (PFC)
NotePFC is a standard feature on all Catalyst 4500 E-series AC-input 
power supplies. PFC reduces the...

A-45
Catalyst 4500 E-Series Switches Installation Guide
OL-13972-02
Appendix A      Power Supply Specifications
  9000 W AC-Input Power Supply
Power supply output  Total output power depends on the number of inputs connected and the 
available source AC voltage. If more than one input is used, all inputs be 
the same AC voltage (either high-line or low-line).
NoteMixed voltage input mode operation is supported. 
•1100 W operation (with one 120 VAC nominal input)
–80 A @ 12 VDC (data only)
–12.5 A @ 3.3...

A-46
Catalyst 4500 E-Series Switches Installation Guide
OL-13972-02
Appendix A      Power Supply Specifications
  9000 W AC-Input Power Supply
Ta b l e A - 3 6 list the 9000 W AC-input power supply LEDs and their meanings.
System software detects how many of the source AC input lines on the power supply are powered and at 
what voltage (low-line or high-line) they are operating at. In addition, the 12 VDC and the -50 VDC 
output lines are monitored allowing total output power to be determined.
In...

A-47
Catalyst 4500 E-Series Switches Installation Guide
OL-13972-02
Appendix A      Power Supply Specifications
  9000 W AC-Input Power Supply
Ta b l e A - 3 7 shows the wattage output possible from a 9000 W AC-input power supply operating in 
redundant mode. 
NoteIn redundant mode, the two power supplies must have identical inputs and all inputs must be at the same 
voltage. If either of the two power supplies is unpowered, there is no redundancy.
In combined mode, each of the two power supplies...

A-48
Catalyst 4500 E-Series Switches Installation Guide
OL-13972-02
Appendix A      Power Supply Specifications
  9000 W AC-Input Power Supply
9000 W Power Supply AC Power Cords
Ta b l e A - 3 9 lists the specifications for the AC power cords that are available for the 9000 W AC-input 
power supply. The table includes references to power cord illustrations.
NoteAll 9000 W AC-input power supply power cords have an IEC60320/C19 appliance plug at one end.  110/110/110 220/220/220 45/55 40/60 67 2628 4150...

A-49
Catalyst 4500 E-Series Switches Installation Guide
OL-13972-02
Appendix A      Power Supply Specifications
  9000 W AC-Input Power Supply
Japan, North 
America 
(locking)
200–240 VAC 
operationCAB-AC-2800W-TWLK=
CAB-L620P-C19-US=13.6 ft 
(4.1 m)16 A, 250 VAC NEMA L6-20
Australia CAB-AC-16A-AUS 
CAB-A3112-C19-AUS=14 ft (4.3 m) 16 A, 250 VAC AU20S3
Argentina CAB-IR2073-C19-AR=  14 ft (4.3 m) 16 A, 250 VAC IRAM 2073
China 
200–240 VAC 
operationCAB-9K16A-CH 14 ft (4.3 m) 16 A, 250 VAC GB16C
Switzerland...

A-50
Catalyst 4500 E-Series Switches Installation Guide
OL-13972-02
Appendix A      Power Supply Specifications
  9000 W AC-Input Power Supply
Remote Power Cycling Feature
The 9000 W AC-input power supply is equipped with a remote power cycling feature that allows you to 
remotely turn on or turn off the power supply through an external relay controller box. Figure A-11 
shows a typical remote power on/off setup. A three-position terminal block, located on the lower right 
quadrant of the power supply...

A-51
Catalyst 4500 E-Series Switches Installation Guide
OL-13972-02
Appendix A      Power Supply Specifications
  9000 W AC-Input Power Supply
Ferrite Bead
A plastic bag containing one ferrite bead and two 4-inch plastic ties is included with the 9000 W power 
supply AC power cords. The ferrite bead is a passive device that limits high-frequency interference on 
interface and control cables and is only required when you install the remote power-cycling feature that 
is supported by the 9000 W power...

A-52
Catalyst 4500 E-Series Switches Installation Guide
OL-13972-02
Appendix A      Power Supply Specifications
  Environmental Monitoring Feature
Environmental Monitoring Feature
With the environmental monitoring and reporting feature, you can keep your system running by 
resolving adverse environmental conditions before a loss of operation.
The power supply monitors its own internal temperature and voltages. In the event of excessive internal 
temperature, the power supply shuts down to prevent damage....