Cine Versum Cineversum Projector Lv Xg6k User Manual

							30
MENUSELECT
160
0
0 0 0
1
Computer input
Auto PC adjustment
Auto PC Adjustment function is provided to automatically adjust total dots, horizontal position, vertical position,
horizontal image, and vertical image to conform to your computer.
PC adjust  menu
Full menu operation
Auto PC adjustment
1.Press the F.MENU button to display the full screen
menu. Use the
x
zbuttons to select the PC adjust
icon and press the
ybutton or SELECT button.
2.Press the
x
zbuttons to select AUTO PC
Adjustment, and then press the SELECT button.
To store the adjusted parameters
The system parameters adjusted in the Auto PC Adjustment can be stored in the projector.

Note:
Total dots and horizontal & vertical positions of some computers cannot be fully adjusted with this Auto PC
Adjustment function. When the image is not provided properly with this operation, manual adjustments are
required.
The Auto PC Adjustment cannot be operated when 480i, 575i, 480p, 575p, 720p, 1035i,
or 1080i is selected in
the PC System Menu 
PC adjustAuto PC adj.
Fine sync
To t a l d o t s
Horizontal
Ve r t i c a l
Clamp
Di s pla y  area   H
Di s pla y  area    V
Reset
Mode  free
Store
Exit Move NextNext 
						

							31
Computer input
Manual adjustment via PC
As some PCs adopt special signal formats, the multi-purpose scanner of may not detect them. To match the
special-format signals, offers function of manual adjustment, with which users can adjust the parameters.
provides 5 independent memory sections, where the manually adjusted parameters can be saved. In the case
of specific PC, the user can make use of the  memory space to set up whenever necessary.
1. Press F. Menu to display the F. Menu. Press
x
zto
select the iconfor PC adjustment. Then press
yor
press Select.
2. Press
x
zto select the item to be adjusted, and
then press Select. At the time, the adjustment
dialogue box will appear. Press
{
yto set the value.
Fine sync:
Use it to eliminate the flashing of the image. Press
{
y
to adjust the value.
Total dots:
Press
{
yto adjust the total dots for a cycle so that it can match the image on PC.
Horizontal:
Press
{
yto adjust the horizontal position of the image.
Vertical:
Press
{
yto adjust the vertical position of the image.
Clamp:
Press
{
yto adjust the clamp position. When black strips appear on the image, you can use this function.
D i s p l ay  area   H:
Press
{
yto adjust the area of  horizontal projection.
D i s p l ay  area    V:
Press
{
y to adjust the area of vertical projection.
Reset:
To re-set the adjusted data, you should select the initial st ate, and then press Select. Click Yes when the dialogue box
appears for confirmation. After that, all adjusted value will return to the initial state. 
Mode  free:
To delete the saved data, you should select the Standby Mode, and press
yor Select. The mode to be deleted will be
highlighted. At the time, click Select.
Store:
To save the adjusted data, you should select Save, and press
yor Select. Then move the cursor to select the saving
mode from the items 1-5. Finally click Select.
¥Note:
If you select 480i, 575i, 480p, 575p, 720p, 1035i or 1080i  from the system menu, the functions of both horizontal
image and vertical image willbe disabled.PC adjust menu
MENUSELECT
16
0
0
0 0 0
1
PC adjustAuto PC adj.
Fine sync
To t a l d o t s
Horizontal
Ve r t i c a l
Clamp
Di s pla y  area   H
Di s pla y  area    V
Reset
Mode  free
Store
Exit Move NextNext 
						

							32
MENUSELECT
Computer input
Selecting image mode
Direct selection:
Use the key Image on the remote control to select the
image mode.
Operation through F. Menu
1.Press F. Menu to display the F. Menu. Press

x
zto
select the icon for Image select . Then press

yor
press Select.
2.Press
x
zto select the desired item, and then press
Select.
When the image is viewed in a room, select this mode.
This is the default image mode.
Multiple grey scales can be selected, and it suits for
watching movies.
This mode can be used to project the image on a green
board to enhance the image quality. It mainly functions
on a green board, not black board.
This mode is suitable for projecting the image onto the
red, blue, yellow or green wallpaper.
This is the image mode pre-set by in the image
adjustment menu.Remote control
Key for selecting an image mode
Menu for selecting image quality
Image select
Dynamic
Normal
Cinema
Blackboard(Green)
Red
User   Image
Move Next ExitNext Colorboard
Dynamic
Normal
Cinema
Blackboard(Green)
User   Image Colorboard 
						

							33
                                    32
MENUSELECT
                                     32
                                        32                                       32
                                       32
                                      8
                                      8
Computer input
Adjusting image
1. Press F. Menu on the remote control to display the on-screen
menu. Press
x
zto select the icon for image adjustment.
Then press
y or press Select. 
2. Press
x
zto select the item to be adjusted, and then press
Select. At the time, the adjustment dialogue box will appear.
Press
{
yto set the value.
Contrast
Press
{to decrease the contrast and press
yto increase it.
Brightness
Press
{to decrease the brightness and press
yto increase it.
Color temp.
Press
{
yto select the desired color temperature (optionare “ High ”,
“Mid ” and “ low”)
Red
Press
{to make the red color lighter and press
yto make it stronger.
Green
Press
{to make the green color lighter and press
yto make it stronger.
Blue
Press
{to make the blue color lighter and press
yto make it stronger.
Sharpness
Press
{to soften the image and press
yto sharpen it.
Gamma
Press
{
yto adjust the grey level to achieve better contrast and balance.
Note:

”After white balance (red),white balance (green) or white
balance (blue) is adjusted, the color temperature will change to
“User”.

”When Blackborad (Green) or colorboard is selected in the“Image
select”
,the color temperature will change to“
Blackboard”
or “ colorboard”Menu for adjusting image
Image adjust
Contrast
Brightness
Color temp.
Red
Green
Blue
Sharpness
Gamma
Move
Next
Exit
NextMid 
						

							34
MENUSELECT
Computer input
Adjusting screen size
The size of the screen can be re-set to the valuethe user desires.
1. Press F. Menu on the remote control to display the
on-screen menu. Press
x
zto select the screen. Then
press
yor press Select.
2. Press
x
zto select the desired item, and then press
Select.
This function will make the width-height proportion of the
projected image consistent with the input signals.
This item provides the image with the original si
ze. If the
original image is larger than the screen (1024X768),
Automatically enter the selection mode for image display
section. The user can press

x
z
{
yto select the image
display section. During adjustment, the arrow turns red.
When the max. value is reached, the arrow will disappear.
This item provides normal video images with a width-height
proportion 16:9.
This item provides normal video images with a width-height
proportion 4:3.
This item can help users manually adjust the proportion an
d
position of the screen.
When this item is selected, press
y. The indication of
self-definition will appear on the screen. You can press
x
z

x

z to select the items to be adjusted.Screen Menu
ScreenNormal
True
Digital zoom  + 
Move
Next Exit
Navigation keys
Select
Zoom in/out
·i
Remote control
Next Digital zoom  -  Custom Full Wide
Normal
True
CustomFull Wide
Scale H/V :
Toadjust
thehorizontal/vertical proportionof the
screen.
H&V
:
When this item is enabled, the width-height proportion
willbelocked.Thevertical
proportion is displayed
in grey,
meaning “disabled”. You can
adjustthehorizontalproportion,
andthenmodify the
proportion of the screen on
the basis of
the width-height proportion.
Position H/V: To adjust the horizontal/vertical position of
the screen.
Common : Use this item to save input adjustedproportion.
When you press Select at this item, a dialog
box will pop
up for confirmation.To save the proportion, press Select
at Yes. If you select self-definition, the system willuse
the saved proportion.
Reset
:
This item allows you to re-set the adjustedvalues.
In the initial sta
te, press Select, and a dialog boxwill
pop
up for confirmation. To re-set the parameters,
press Select
at Yes.After you select the digital zoom +, the on-screen menu
will disappear, while the information on digital zoom +
appears. You can pressSelect to zoom in the image size,
and press

x
z
{
yto move the image horizontally.
The moving is effective only when the image is larger
than the size of the screen.
You can also press D.zoom or selecton the remote
controlto zoom in the projected image. Digital zoom  + 
After you select the digital zoom -, the on-screen men
will disappear, while the information on digital zoom -
appears. You can press Select to zoom out the imag
size. Yo
u can also press
on the
remote control to zoom out the projected
 image.
To exit the “digital zoom +/-“mode, press any button except
the D.ZOOM+/- and the SELECT button
To return to Normal size, select “ Screen” in the menu
to adjust screen size, or enter a new input source in the
menu “Input”. Or use keys      for digital zoom to adjust
the screen size

Note:

½Can’
tdisplay imageswithr
esolution
higher than 1920
×1200. If the
resolution ofthe
PC is high than thisvalue, you should adjust
it to
a lower value beforeconnected to the PC.

½

½Image data other than
XGA(1024 x
768) will be
modified to those adaptable to the screen size in
the initial state.
If no signal is detected in the menu ofPC,
Authentic, 4:3 and digital focus +/- will be disabled.
Digital zoom  - 
D.zoom - or select  
						

							35
HDMIComputer  1Computer  2
RGBHV
SCART
MENUSELECT
AV Input
Selecting input source (video, S-video, Component, SCART, HDMI)
Direct selection
Press the input key on the control panel at the side , or press Video, S-video, Component,
SCART, HDMI on the remote control, to select video, S-video and Component.
Operation through menu
1. Press F. Menu on the remote control to display the
F. Menu. Press
x
zto select the icon for
input source. Then press
yor press Select. 
2. Press
x
zto select “ video” or “ S
-video”
, and then press Select.
Component
Select “Component” if the input source is a video
device connected to Y, Cb/Pb and Cr/Pr through the
component VGA cable.
Vi d e o
Select Video when input video signal is connected to
VIDEO terminal.
S-video
Select S-video when input video signal is
connected to the S-video.
SCART
Select “SCART” if the input source is a video device
connected to SCART IN/COMPUTER IN through the
SCART VGA cable. 
HDMI
Connect to HDMI when the video signal is connected
to HDMI terminal.Remote control
Video
Component
Input menu
Component
S-video
Vi d e o 1
Vi d e o 2
Move Exit SystemInput
S-VIDEO
Next
Next
Input 
						

							36
HDMI
RGBHV
SCART
MENUSELECT
AV Input
Selecting AV system
1. Press F. Menu on the remote control to display
the on-screen menu. Press
x
zto select the
icon for input source. Then press
yor press
Select.
2. Press
x
zto select “ Component ”, “ video ”
or “ S
-video” , and then press Select.
3. Press
x
zto select the system, and then press

yor press Select. Press
x
zto select the
signal format, then press Select.
V ideo or S-video.
Auto
Can automatically detect the input video
system and optimize its own state. If the video
system is PAL-M or PAL-N, you shouldmanually
select the system.
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N
If can’t reproduce the image, you should
select a specific signal format from PAL, SECAM,
NTSC, NTSC 4.43, PAL-M and PAL-N.
Component
Auto
Can automatically detect the input video
system and optimize its own state.
Component video signal format
Ifcan’t reproduce the image, you should
select a specific component video signal format
from 480i, 575i, 480p, 575p, 720p, 1035i and 1080i.
¥Note:

”If SCART or HDMI is selected, AV system menu
will be disabled.
AV System Menu (AV or S-video)
Input
Component
Vi d e o 1
Vi d e o 2
Move
Select
Exit
Back SystemInput
AV System Menu (Component)
SECAM
HDMIComputer1Computer2
RGBHV
SCART
MENUSELECT
Input
Component
S-video
Vi d e o 1
Vi d e o 2
Move
Select
Exit
Back SystemInput
575p
Computer1Computer2
S-video 
						

							37
MENUSELECT
Selecting image mode
Direct selection:
Use the key Image on the remote control to select
the image mode.
Menu selection
1.
Press F. Menu to display the F. Menu. Press

zto select the icon for image select. Then
press
y or press Select.
2.Press
x
zto select the desired item, and then
press Select.
Dynamic
When the image is viewed in a room, select this
mode.
This is the default image mode.
Improved half-tone lifelike image mode.
Blackboard(Green)
This mode can be used to project the image on a
green board to enhance the image quality. It mainly
functions on a green
board, not black board.
Colorboard
This mode is suitable for projecting the image onto
the red, blue, yellow or green wallpaper.
This is the image mode pre-set by in the image
adjustment menu.
Remote control
Key for selecting an image mode
Menu for selecting image quality
Image select
Dynamic
Normal
Cinema
Blackboard(Green)
ed R board r o l o C
User  Image
Move
NextExit
AV Input
Next
Normal
Cinema
User  Image 
						

							38
                                    32
MENUSELECT
                                      32
                                        32
 On                                         32                                      32                                  32
                                        32
                                      8
                                      8
                                   L1
AV Input
Adjusting image
1. Press F. Menu on the remote control to display the
on-screen menu. Press
x
zto select the icon for
image adjustment. Then press
yor press Select.
2. Press
x
zto select the item to be adjusted, and
then press Select. At the time, the adjustment
dialogue box will appear. Press
{
yto set the
value.
Contrast
Press
{to decrease the contrast and press
yto increase
it.
Brightness
Press
{to decrease the brightness and press
yto
increase it.
Color
Press
{to decrease the color gamut and press
yto
increase it.
Tin t
Press
{
yto select the appropriate tone for the image.
White balance (Red)
Press
{to make the red color lighter and press
yto
make it stronger.
White balance (Green)
Press
{to make the green color lighter and press
yto
make it stronger.
White balance (Blue) 
Press
{to make the blue color lighter and press
yto
make it stronger.
Sharpness
Press
{ to soften the image and press
yto sharpen it.
Gamma
Press
{
yto adjust the grey level to achieve better
contrast and balance.
Noise reduction
Press
{ to soften the image and press
yto sharpen it.
Enable this item to reduce the snow interference and
achieve more smooth and clear image.
Progressive
The interlaced video signal can be converted into images
in a progressive manner. You can select one from the
options below:
OFF: Disabled;
L1:
Projecting dynamic image;
L2: Projecting still image;
Film: This item is used for watching films. When
it is selected, will restore the images with high
Menu for adjusting image
Image  adjust
Contrast
Brightness
Color
Tin t
Red
Green
Blue
Sharpness
Gamma
Noise reduction
Progressive
MoveNext Exit
Next
quality to reduce image distortion.  
						

							39
MENUSELECT
Adjusting screen size
The size of the screen can be re-set to the value the user desires.
1.Press F. Menu on the remote control to display the on-screen menu.
3UHVV
x
zWRVHOHFWWKHVFUHHQ 7KHQSUHVV
yRUSUHVV6HOHFW
3UHVV
x
zWRVHOHFWWKHGHVLUHGLWHPDQGWKHQSU€``0`€ð€`p
0
Normal
This function will make the width-height proportion of the projected
 image
 consistent with the input signals. 
Wide
This item provides normal video images with a width-height 
proportion 16:9.
¥Note:

”,IQRVLJQDOLVGHWHFWHGWKHV\VWHPZLOOEH
     automatically set as normal state. At the 
WLPHWKHUHODWHGGLDORJER[GLVDSSHDUV

”7KHKRUL]RQWDOYHUWLFDOSURSRUWLRQDQG
RIKRUL]RQWDOYHUWLFDOSRVLWLRQVKRXOGEH
     adjusted according to the input signal. 
Normal
Wide
Custom6FUHHQ
([LWMove
1H[W
Screen Menu
AV Input
1H[W
Custom
This item can help users manually adjust the proportion and 
position of the screen.
:KHQWKLVLWHPLVVHOHFWHGSUHVV
yThe indication of self-definition
will appear on   the screen. YRXFDQSUHVV
x
zWRVHOHFWWKHLWHPV
to be adjusted. 
6FDOH+9
TRDGMXVWWKHKRUL]RQWDOYHUWLFDOSUoportion of the screen.
+	9:KHQWKLVLWHPLVHQDEOHGWKH
width-height proportion will be 
 locked. The vertical proportion is displayed  in greyPHDQLQJ
 “disabled”.You can adjust thehorizontal proportLRQDQG then 
 modify the proportion of the screen on the basis of  the width-height
proportion.
3RVLWLRQ+9TRDGMXVWWKHKRUL]RQWDOvertical
position of the screen.
Common: Use this item to save input adjusted proportion. When\RXSUHVV6HOHFW
DWWKLVLWHPDGLDORJER[ZLOOSRSXSIRUFRQILUP@pÀ 
TRVDYHWKHSURSRUWLRQSUHVV
6HOHFWDWYGSURSRUWLRQ
Reset:7KLVLWHPDOORZV\RXWRUHVHWWKHDGMXVWHGYDOXHV
0À0p°€0ÀÀpLDOVWDWH
TRUHVHWWKHSDUDPHWHUV
SUHVV6HOHFWDWYes.