Cine Versum Cineversum Projector Lv Xg6k User Manual

1
 Statement
Note:
The screen menu and pictures in the manual may slightly differ from the real product.
The manual is subject to change without prior notice. 

Table of Contents
Table of Contents......................2
To the Owner..........................3
Safety Guide................. ..... ....5
Air Circulation 6
Installing the Projector in Proper Directions 6
Moving the Projector 6
Part Names and Functions..............7
Front 7
Back 7
Bottom 7
Rear Terminal 8
Side control and indicators 9
Remote Control 10
Remote Control Battery Installation 12
Operating Range 12
Installation...........................13
Positioning the Projector 13
Feet Shift Adjustable...



½


4
Safety guide
All the safety and operating instructions should be read
before the product is operated.
Read all of the instructions given here and retain them
for later use. Unplug this projector from AC power supply
before cleaning. Do not use liquid or aerosol cleaners.
Use a damp cloth for cleaning.
Follow all warnings and instructions marked on the
projector.
For added protection to the projector during a lightning
storm, or when it is left unattended and unused for long
periods of time, unplug it...

10Û
10Û
10°10°
10°10°
5
Air circulation
Openings in the cabinet are provided for ventilation. To
ensure reliable operation of the product and to protect it
from overheating, these openings must not be blocked or
covered.
Caution
Hot air is exhausted from the exhaust vent. When using
or installing the projector, the following precautions
should be taken.
--Do not put any flammable objects, or spray can near
the projector. Hot air is exhausted from the air vents.
--Keep the exhaust vent at least 1 m away...

6
Safety guide
Moving the projector
Caution on lens protector
Before use, remove the lens protector. To move the projector, press and
hold the Shift  or lens key more than 5 seconds to center the lens back.
Then, install the protector to protect the lens.
Lens protector
When moving the projector, retract the adjustable feet to prevent damage to the lens and cabinet.
Put it into a suitable case when the projector is not in use for a long period.
Caution in moving or transporting the projector
– Do not...


 




!
!#
$
‘


‘

’

’

7
Part names and functions 
(1) Lens release button
(2) Indicator
(3) Lamp cover
(4) Speaker
(5) Lens cap
(6) Projector lens
(7) Decorative cover
(8) Remote receiver (Front & top)
(9) Side control panel
(10) Exhaust vent
Caution
Hot air is exhausted from the exhaust vent. Do
not put heat-sensitive objects near this side.
(11) Remote receiver (Back)
(12) Terminals and connectors
(13) Air filter and air-intake vent
(14) Power cord connector
(15) Safety...

71098611
15432
HDMI
INPUT2
INPUT1
MONITOR  OUTSCART IN
COMPUTER  IN2 COMPUTER    IN1
3/4HS/CSVS
   OUT
4
VIDEO  2
1
8
(1) Network port
Used to connect the network cable.
(2) CONTROL
When using RS232 to control the projector,
please connect the serial control line to this
terminal.
(3) COMPUTER IN2/MONITOR OUT
- Used to connect the computer output.
- Used to output the analog signals from (4) or
(6) to the other monitor.
(4) COMPUTER IN1/SCART IN
- Used to connect a computer or RGB SCART
output.
(5) HDMI...

9
(1
)
(2) INPUT button
To select an input source.
(3) SHIFT button
To enter the lens shift mode.
(4
4 ) AUTO SETUP button
To perform various settings configured
automatically, including the input source
search function and auto PC adjust function.
(5) ZOOM button
To zoom in/out images.
(6) MENU button
To open or close the screen menu.
(7) FOCUS button
To adjust the focus.
(8) ON/STAND-BY button(9)
POWER indicator
– Lights red when the projector is in stand-by
mode.
– Lights green during operations.
–...