Cine Versum Cineversum Projector Lv Wu6k User Manual

20
1
2
3
3
Basic operation
Turning off the projector
Press the ON/STAND-BY button on the side control or on
the remote control, and “Power off?” appears on the screen.
Press the ON/STAND-BY button again to turn off the
projector. The POWER indicator starts to flash red, and the
cooling fans keep running. (You can select the level of the
fans’ quietness and running speed.) At this time you can
unplug the AC power cord even if the fans are still running.
When the projector has cooled down enough to be...

21
1
2
3
4
5
1
2
3
HDMI
DVI
Computer 1
Video 2
RGBHV
SCART
MENUSELECT
Basic operation
How to operate the on-screen menu
Remote control
The projector can be adjusted or set via the on-screen
menu, including Shortcut menu and Full menu.
General operations are available via the shortcut menu.
A full menu features multiple structures. Each main
menu can be divided into several levels of submenus,
and submenus are also divided into several levels of
sub-submenus. For each adjustment and setting
procedure,...

22






 


Basic operation
Full menu bar
Main menu Sub menu
(1) PC adjust menu
Used to adjust parameters, like                 
à         
à  
à                                       
Ã
                                                                           
à  
à                                , to match with VGA input signal format.
(2) Screen menu
If a computer is selected as a signal source, the following setup options for the image size are available: Normal, True,
Full,...

23
C
C
C
C
Basic operation
Auto setup function
This function is available just by pressing the Auto Setup
button on the top control. The system then automatically
performs various settings in the setup menu, including input
source search, and auto computer adjustment.Arrow keys
Keystone
correcting
button
Auto setup
Remote control

x
z
Lens shift  Control panel (on the right side of the projector body)
1.Use SHIFT on the control panel or LENS of the remote control to adjust the lens.
2. “Lens shift” will...

24
MENUSELECT
16

”

”

”

”

”The arrows are white when there is
no correction.
The direction of the arrows which
are being corrected turns red.
maximum correction.
button on the top control or on the
remote control once more while the
keystone dialog box is being
displayed, the keystone adjustment
is canceled.
The adjustable range can be limited
depending on the input signal.
Keystone
·
iKeystone
If a projected picture has keystone distortion, correct the image
with the Keystone function.
Press the...

25
Basic operation
HDM I/DVI
Computer
button
Vi d e o b u t t o n
Z D. oom+/-
buttonS-Video
button
Component
button
Arrow buttons

x
z
Lamp mode
button
Freeze
 button
Remote control operation
Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables
you to make the desired operation quickly without calling up the on-screen menu.
Remote control
Direct INPUTbutton
Press the Computer/video/HDMI/ DVI/ S-Video/RGBHV/
SCART
/component button to select...

26
02
Ö02
Basic operation
LENS button
ZOOM button
Screen mode
button
Timer button
Focus button
Blank button
button
BLANK button
Press the BLANK button to black out the image. To restore to
normal, press the BLANK button again or press any other
button. The screen changes each time you press the button as
follows.
Black out
:Normal
:Black out
:Normal...
“Blank” disappears after 4 seconds if
there is no other button operation.
TIMER button
Press the TIMER button. The timer display “00:00” appears on the...

27
Computer 1
Computer 2
1
2
HDMI
Computer 1
Computer 2
DVI
RGBHV
SCART
Computer input
Input source selection (Computer 1 or Computer 2)
Direct operation
Press the INPUT button on the side control or the COMPUTER
button on the remote control to select either
Remote control
Input menu
Full menu operation
Press the F.MENU button to display the full
screen menu. Use the
x
zbuttons to select the
inputsourceiconandpressthe
ybutton or
SELECT button.
Press the
x
zbuttons to select Computer 1 or Computer 2
and...

28
Computer input
Input menuFull menu operation
1.Press the F.MENU button to display the full screen
menu. Use the

·ibuttons to select the input
source icon and press the

ybutton or SELECT
button.
2.Press the
·ibuttons to select RGBHV, and
then press the SELECT button.
HDMI/DVI
Input source selection (DVI)
Direct operation
Press the INPUT button on the side control or the DVI
button on the remote control to select DVI .
Remote control
HDMI/DVI button
F.MENU button
HDMI
Computer 1
Computer 2
DVI...

HDMI
DVI
Computer 1
Video 2
RGBHV
SCART
MENUSELECT
Input
Input Computer 2
System
Exit Component
S-video
Video 1
Next Move
Next
29
Auto
-----
Computer input
Computer system selection
The projector automatically tunes to various types of comput ers with its function of Multi-scan system and Auto PC
Adjustment. If a computer is selected as a signal source, theprojector automatically detects the signal format and
tunes to project proper images without any additional setting.
VGA system menu
One of the...