Christie Projector LX601i User Manual

							39Network Guide020-000475-02 Rev. 1 (06-2012)
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
3.1.11 Remote Control
The functions on the bundled remote control are 
assigned to the Web Remote Control screen.
Do not attempt to control the projector with the 
projector's remote control and via Web Remote 
Control at the same time. It may cause some 
operational errors in the projector.
Item Description
STANDBY Assigned the same operation as  STANDBY button.
ON Assigned the same operation as  ON button.
COMPUTER IN1 Assigned the same operation as  COMPUTER IN1 button.
COMPUTER IN2 Assigned the same operation as  COMPUTER IN2 button.
LAN Assigned the same operation as  LAN button.
USB TYPE A Assigned the same operation as  USB TYPE A button.
USB TYPE B Assigned the same operation as  USB TYPE B button.
COMPONENT Assigned the same operation as  COMPONENT button.
S-VIDEO Assigned the same operation as  S-VIDEO button.
VIDEO Assigned the same operation as  VIDEO button.
HDMI 1 Assigned the same operation as  HDMI 1 button.
HDMI 2 Assigned the same operation as  HDMI 2 button.
FREEZE Assigned the same operation as  FREEZE button.
AV MUTE Assigned the same operation as  AV MUTE button.
▲ Assigned the same operation as ▲ button.
▼ Assigned the same operation as ▼ button.
◄ Assigned the same operation as ◄ button.
► Assigned the same operation as ► button.
ENTER Assigned the same operation as  ENTER button.
MENU Assigned the same operation as  MENU button.
RESET Assigned the same operation as  RESET button.
PAGE UP Assigned the same operation as  PAGE UP button.
PAGE DOWN Assigned the same operation as  PAGE DOWN button.
SLIDESHOW Starts the Slideshow.
3. Web Control
3.1 Projector Web Control (continued)
(continued on next page) 
						

							40Network Guide020-000475-02 Rev. 1 (06-2012)
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
3. Web Control
3.1 Projector Web Control - Remote Control (continued)
• The Web Remote Control does not support repeat function that 
performs an action while holding a button clicked down.
• Since the repeat function is not available, click the button repeatedly as many 
times as you require.
• 
Even if you hold the button clicked down for a while, the Web Remote Control 
sends your request command one time only. Release the button, then click it again. 
• When the [STANDBY] or [ON] button is pushed, a message window comes 
up to confirm the operation. To control the power, push [OK], otherwise push 
[Cancel].
NOTE 
						

							41Network Guide020-000475-02 Rev. 1 (06-2012)
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
3.1.12 Projector Status
Displays the settings and status of the projector.
Item Description
Error Status Displays the current error status
Lamp Time Displays the usage time for the current lamp.
Filter Time Displays the usage time for the current filter.
Filter Status Displays the current cleanliness level of the air filter.
Power Status Displays the current power status.
Input Status Displays the current input signal source.
Blank On/Off Displays the current BLANK screen on/off status.
Mute Displays the current audio mute on/off status.
Freeze Displays the current Freeze status.
Shutter Displays the current Shutter status.
3.1.13 Network Restart
Restarts the projector’s network connection.
Item Description
Restart Restarts the projector’s network connection in order to 
activate new configuration settings.
• Restarting requires you to re-log on in order to further control or 
configure the projector via a web browser. Wait 30 seconds or more after 
clicking the  [Restart] button to log on again.
NOTE
3. Web Control
3.1 Projector Web Control (continued) 
						

							42Network Guide020-000475-02 Rev. 1 (06-2012)
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
3. Web Control
The Main window as shown above is 
displayed at first. However, if you have 
enabled User Password on the Tools window 
(
&46), a dialog prompting you to enter 
the password as shown on the right will be 
displayed, and no operation is enabled until 
you have entered the password. After entering 
the preset password, the dialog disappears 
and the Main window will be displayed.
As shown below, you can open a window by 
clicking the corresponding tab at the top right 
of the window.
• If  Crestron e-Control in the Network Settings (&21) is set to 
Disable, Crestron e-Control® cannot be used to operate the projector. Enable 
Crestron e-Control and close the web browser. Next, restart the web browser, 
followed by entering the projector's IP address. 
• Only English is supported on Crestron e-Control
®.
• If the connection is terminated, the "Loading..." screen will appear . Check the 
connection between the  projector and the computer, then return or refresh the 
Web page. NOTE
3.2 Crestron e-Control®
User Password dialog
Tab
Tab Description
Logout Logs out from e-Control®. 
This tab appears only when User Password of the Tools window is 
enabled.
Tools Opens Tools window 
(
&45).
Info Opens Info window
 (
&47).
Contact IT Help Opens Help Desk window 
(
&48). 
						

							43Network Guide020-000475-02 Rev. 1 (06-2012)
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
3. Web Control
3.2 Crestron e-Control® (continued)
3.2.1 Main window
You can operate the basic controls of the projector on this screen.
• If the projector is in the standby mode, only the  [Power] button can 
be operated. NOTE
1 Click a button and operate as follows.
Button Description
Power Turns the power on/off.
Vol -/ Vol + Adjusts the volume setting.
Mute Turns the audio mute on/off.
2  Sources List 
You can click a button to switch the input channel. The cursor will move 
according to the currently selected input port.
Button Description
Computer in1 Selects input from COMPUTER IN1 port.
Computer in2 Selects input from COMPUTER IN2 port.
LAN Selects input from LAN port.
USB Type A Selects input from USB TYPE A ports.
USB Type B Selects input from USB TYPE B port.
HDMI 1 Selects input from HDMI 1 port.
HDMI 2 Selects input from HDMI 2 port.
Component Selects input from COMPONENT port.
S-Video Selects input from S-VIDEO port.
Video Selects input from VIDEO port.
1
42
3 
						

							44Network Guide020-000475-02 Rev. 1 (06-2012)
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
3. Web Control
3.2 Crestron e-Control® - Main window (continued)
3   Click a button and operate as follows. To show the hidden buttons, click the ◄ / 
► icons at the left and right ends.
Button Description
Freeze Turns Freeze on/off.
Contrast Adjusts the contrast setting.
Brightness Adjusts the brightness setting.
Color Adjusts the color setting.
Sharpness Adjusts the sharpness setting.
Magnify Controls the magnification setting using the [+] / [-] buttons.
Use the [▲] [▼] [◄] [►] buttons to move to the area you want 
to magnify.
Auto Performs the automatic adjustment.
Blank Turns the BLANK screen on/off.
4  Click the button and operate in the same way as the bundled remote control.
Button Description
Menu Assigned the same operation as  MENU button.
Enter Assigned the same operation as  ENTER button.
Reset Assigned the same operation as  RESET button.
▲  Assigned the same operation as  ▲ button.
▼ Assigned the same operation as ▼ button.
◄ Assigned the same operation as ◄ button.
► Assigned the same operation as ► button. 
						

							45Network Guide020-000475-02 Rev. 1 (06-2012)
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
3. Web Control
3.2 Crestron e-Control® (continued)
3.2.2 Tools window
Configures the settings between the projector and Crestron
® control system.
Click the [Exit] button to return to the Main window.
1   Crestron Control 
Configures the settings of Crestron
® control system devices.
Item Description
IP Address Configures the IP address of the control system.
IP ID Configures the IP ID of the control system.
Port Specifies the port number used for communication by the 
control system.
To apply the settings, click the [Send] button.
2   Projector 
Configures the network settings of the projector.
Item Description
Projector Name Configures the name of the projector. The length of the 
Projector Name can be up to 64 alphanumeric characters. 
Location Configures the location name of the projector. You can specify 
a Location name up to 32 alphanumeric characters.
Assigned To: Configures the user name for the projector. You can specify a 
user name up to 32 alphanumeric characters. 
The usable symbols are space and the following:   
!"#$%&'()*+,-./:;?@[\]^_`{|}~
To apply the settings, click the [Send] button.
14
53
2
• If two-byte characters are used, the input text or numbers cannot be 
set correctly.
• All items on this window cannot be left blank. NOTE 
						

							46Network Guide020-000475-02 Rev. 1 (06-2012)
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
3. Web Control
3.2 Crestron e-Control® - Tools window (continued)
3    
Projector (continued)  
Configures the network settings of the projector.
Item Description
DHCP Enables DHCP.
IP Address Configures the IP address when DHCP is disabled.
Subnet Mask Configures the subnet mask when DHCP is disabled.
Default Gateway Configures the default gateway when DHCP is disabled.
DNS Server Configures the DNS server address.
To apply the settings, click the [Send] button.
4   User Password  
Configures the User Password. To prompt the entry of User Password before 
starting e-Control
®, select the checkbox.
Item Description
New Password Configures the password. 
You can specify a password up to 26 alphanumeric characters. 
The usable symbols are space and the following:
 
   !"#$%&'()*+,-./:;?@[\]^_`{|}~
Confirm Reenter the above password for verification. If the password is 
incorrect, an error message is displayed.
To apply the settings, click the [Send] button.
5   Admin Password 
Configures the Admin Password. To prompt the entry of Admin Password before 
displaying the Tools window, select the checkbox.
Item Description
New Password Configures the password. 
You can specify a password up to 26 alphanumeric characters. 
The usable symbols are space and the following:
 
   !"#$%&'()*+,-./:;?@[\]^_`{|}~
Confirm Reenter the above password for verification. If the password is 
incorrect, an error message is displayed.
To apply the settings, click the [Send] button. 
						

							47Network Guide020-000475-02 Rev. 1 (06-2012)
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
3. Web Control
3.2 Crestron e-Control® (continued)
3.2.3 Info window
Displays the settings and status of the projector.
Click the [Exit] button to return to the Main window.
1   Projector Information
Item Description
Projector Name Displays the projector name settings.
Location Displays the location name of the projector.
MAC Address Displays the wired LAN MAC address of the projector.
Resolution Displays the resolution and vertical frequency of the signal 
input selected on the projector.
Lamp Hours Displays the usage time for the current lamp.
Assigned To: Displays the user name for the projector.
2  Projector Status
Item Description
Power Status Displays the current power status.
Input Source Displays the current input signal source.
Picture Mode Displays the current picture mode setting.
Installation Displays the current installation setting.
Eco Mode Displays the current eco mode setting.
Error Status Displays the current error status.
12
• Projector Name, Location and the user name for Assigned To: may 
appear truncated if they are too long. NOTE 
						

							48Network Guide020-000475-02 Rev. 1 (06-2012)
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
3. Web Control
3.2 Crestron e-Control® (continued)
3.2.4 Help Desk window
Sends/receives messages to/from the administrator for Crestron RoomV iew® 
Express.
Button Description
Send Sends a message.
Check the received message.