Christie Projector LX601i User Manual

LX501/LW401/LWU421/ 
LX601i/LW551i/LWU501i
User Manual-Network Guide
020-000475-02 

1Network Guide020-000475-02 Rev. 1 (06-2012)
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
Projector
LX501/LW401/LWU421/ 
LX601i/LW551i/LWU501i  
User Manual 
Network Guide
User's Manual (detailed) - Network Guide
Thank you for purchasing this product.
This manual is intended to explain only the network function.  
For proper use of this product, please refer to this manual and the 
other manuals for this product.
Features
This projector has the network function that brings you the following ma\
in...

2Network Guide020-000475-02 Rev. 1 (06-2012)
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
Contents
Contents
&
Caution  ........................................................................\
..................  4
1. Connection to the network   ......................................................  5
1.1 System requirements  ........................................................................\
.........  5
1.1.1 Required equipment preparation...

3Network Guide020-000475-02 Rev. 1 (06-2012)
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
Contents
&
6. Network Bridge Function  .......................................................  52
6.1 Connecting devices  ........................................................................\
..........  52
6.2 Communication setup   ........................................................................\
.......  53
6.3 Communication port   ........................................................................\...

4Network Guide020-000475-02 Rev. 1 (06-2012)
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
Caution
Caution
To use the wireless network function of this projector, the designated USB wire-
less adapter that is sold as an option is required. For precautions according to the 
standards and laws, refer to the documents that come with the adapter.
[Restriction on plugging and unplugging the USB wireless adapter]
Before you insert or pull out the USB wireless adapter from the projector, turn off 
the power of the...

5Network Guide020-000475-02 Rev. 1 (06-2012)
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
1. Connection to the network
1.1 System requirements
1. Connection to the network
The following equipments are required to connect the projector to your computer 
through the network.
■ Common    The projector: 1 unit,    Computer : minimum 1 set
■ Depending on how you want to connect
1)  For the wired connection  *1  
 LAN cable (CAT-5 or greater): 1 piece 
2)   For the wireless connection  *2  
- Projector side...

6Network Guide020-000475-02 Rev. 1 (06-2012)
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
1. Connection to the network
1.1 System requirements (continued)
• The network communication control is disabled while the projector is 
in standby mode if the STANDBY MODE item is set to SAVING. Please connect 
the network communication to the projector after setting the STANDBY MODE 
to NORMAL. (
&SETUP menu in the Operating Guide )
• You can get the latest version of the applications for the network functions of 
the...

7Network Guide020-000475-02 Rev. 1 (06-2012)
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
1. Connection to the network
1.3 Manual network connection setting - Wired LAN -
This section explains how to set it up manually.
1.3.1 Equipments connection
Connect the projector and a computer with a LAN cable. 
* Before connecting with an existing network, contact the network administrator. 
Next, check the following computer settings.
1.3.2 Network settings
This is the explanation of network connection settings for...

8Network Guide020-000475-02 Rev. 1 (06-2012)
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
1. Connection to the network
1.3 Manual network connection setting - Wired LAN - (continued)
7)  Select "Use the following IP address" and configure the IP 
address, Subnet mask and Default gateway for the computer 
accordingly. If a DHCP server exists in the network, you 
can select "Obtain an IP address automatically" and the IP 
address will be assigned automatically. 
After setting is complete, click...