Christie Projector LX601i User Manual
Here you can view all the pages of manual Christie Projector LX601i User Manual. The Christie manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 21
![Page 21
19Network Guide020-000475-02 Rev. 1 (06-2012)
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
3.1.3 Network Settings
Displays and configures network settings.
Item Description
Common Setup
Configures the settings common to wireless and wired LAN.
Projector Name Configures the name of the projector.
The length of the Projector Name can be up to 64
alphanumeric characters. Only alphabets, numbers and
following symbols can be used.
!"#$%&'()*+,-./:;?@[\]^_`{|}~ and space.
Particular projector name is...](http://img.usermanuals.tech/thumb/5770/99290/w300_projector_manual_7067_d-20.png "Page 21
19Network Guide020-000475-02 Rev. 1 (06-2012)
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
3.1.3 Network Settings
Displays and configures network settings.
Item Description
Common Setup
Configures the settings common to wireless and wired LAN.
Projector Name Configures the name of the projector.
The length of the Projector Name can be up to 64
alphanumeric characters. Only alphabets, numbers and
following symbols can be used.
!\"#$%&'()*+,-./:;?@[\]^_`{|}~ and space.
Particular projector name is...")
19Network Guide020-000475-02 Rev. 1 (06-2012)
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
3.1.3 Network Settings
Displays and configures network settings.
Item Description
Common Setup
Configures the settings common to wireless and wired LAN.
Projector Name Configures the name of the projector.
The length of the Projector Name can be up to 64
alphanumeric characters. Only alphabets, numbers and
following symbols can be used.
!"#$%&'()*+,-./:;?@[\]^_`{|}~ and space.
Particular projector name is...
Page 22
20Network Guide020-000475-02 Rev. 1 (06-2012) LX501/LX601i/LW401/LW551i/LWU421/LWU501i 3.1 Projector Web Control - Network Settings (continued) 3. Web Control ItemDescription Wireless Setup Configures the wireless LAN settings. Mode Select "Ad-Hoc" or "Infrastructure". IP Configuration Configures network settings. DHCP ON Enables DHCP. DHCP OFF Disables DHCP. IP Address Configures the IP address when DHCP is disabled. Subnet Mask Configures the subnet mask when DHCP is disabled. Default...
Page 23
![Page 23
21Network Guide020-000475-02 Rev. 1 (06-2012)
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
Click the [Apply] button to save the settings. 3.1 Projector Web Control - Network Settings (continued)
ItemDescription
Wired Setup Configures the wired LAN settings.
IP Configuration Configures network settings.
DHCP ON Enables DHCP.
DHCP OFF Disables DHCP.
IP Address Configures the IP address when DHCP is disabled.
Subnet Mask Configures the subnet mask when DHCP is disabled.
Default
Gateway Configures the default...](http://img.usermanuals.tech/thumb/5770/99290/w300_projector_manual_7067_d-22.png "Page 23
21Network Guide020-000475-02 Rev. 1 (06-2012)
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
Click the [Apply] button to save the settings. 3.1 Projector Web Control - Network Settings (continued)
ItemDescription
Wired Setup Configures the wired LAN settings.
IP Configuration Configures network settings.
DHCP ON Enables DHCP.
DHCP OFF Disables DHCP.
IP Address Configures the IP address when DHCP is disabled.
Subnet Mask Configures the subnet mask when DHCP is disabled.
Default
Gateway Configures the default...")
21Network Guide020-000475-02 Rev. 1 (06-2012) LX501/LX601i/LW401/LW551i/LWU421/LWU501i Click the [Apply] button to save the settings. 3.1 Projector Web Control - Network Settings (continued) ItemDescription Wired Setup Configures the wired LAN settings. IP Configuration Configures network settings. DHCP ON Enables DHCP. DHCP OFF Disables DHCP. IP Address Configures the IP address when DHCP is disabled. Subnet Mask Configures the subnet mask when DHCP is disabled. Default Gateway Configures the default...
Page 24
![Page 24
22Network Guide020-000475-02 Rev. 1 (06-2012)
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
3.1.4 Port Settings
Displays and configures communication port
settings.
Item Description
Network Control Port1
(Port:23) Configures command control port 1 (Port:23).
Port open Click the [Enable] check box to use port 23.
Authentication Click the [Enable] check box when authentication is required
for this port.
Network Control Port2
(Port:9715) Configures command control port 2 (Port:9715).
Port open Click the...](http://img.usermanuals.tech/thumb/5770/99290/w300_projector_manual_7067_d-23.png "Page 24
22Network Guide020-000475-02 Rev. 1 (06-2012)
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
3.1.4 Port Settings
Displays and configures communication port
settings.
Item Description
Network Control Port1
(Port:23) Configures command control port 1 (Port:23).
Port open Click the [Enable] check box to use port 23.
Authentication Click the [Enable] check box when authentication is required
for this port.
Network Control Port2
(Port:9715) Configures command control port 2 (Port:9715).
Port open Click the...")
22Network Guide020-000475-02 Rev. 1 (06-2012) LX501/LX601i/LW401/LW551i/LWU421/LWU501i 3.1.4 Port Settings Displays and configures communication port settings. Item Description Network Control Port1 (Port:23) Configures command control port 1 (Port:23). Port open Click the [Enable] check box to use port 23. Authentication Click the [Enable] check box when authentication is required for this port. Network Control Port2 (Port:9715) Configures command control port 2 (Port:9715). Port open Click the...
Page 25
![Page 25
23Network Guide020-000475-02 Rev. 1 (06-2012)
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
ItemDescription
SNMP Port Configures the SNMP port.
Port open Click the [Enable] check box to use SNMP.
Trap address Configures the destination of the SNMP Trap in IP format.
• The address allows not only IP address but also domain
name if the valid DNS server is setup in the
Network
Settings. The maximum length of host or domain name is up
to 255 characters.
Download MIB file Downloads a MIB file from the...](http://img.usermanuals.tech/thumb/5770/99290/w300_projector_manual_7067_d-24.png "Page 25
23Network Guide020-000475-02 Rev. 1 (06-2012)
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
ItemDescription
SNMP Port Configures the SNMP port.
Port open Click the [Enable] check box to use SNMP.
Trap address Configures the destination of the SNMP Trap in IP format.
• The address allows not only IP address but also domain
name if the valid DNS server is setup in the
Network
Settings. The maximum length of host or domain name is up
to 255 characters.
Download MIB file Downloads a MIB file from the...")
23Network Guide020-000475-02 Rev. 1 (06-2012) LX501/LX601i/LW401/LW551i/LWU421/LWU501i ItemDescription SNMP Port Configures the SNMP port. Port open Click the [Enable] check box to use SNMP. Trap address Configures the destination of the SNMP Trap in IP format. • The address allows not only IP address but also domain name if the valid DNS server is setup in the Network Settings. The maximum length of host or domain name is up to 255 characters. Download MIB file Downloads a MIB file from the...
Page 26
![Page 26
24Network Guide020-000475-02 Rev. 1 (06-2012)
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
3.1.5 Mail Settings
Displays and configures e-mail addressing
settings.
Item Description
Send Mail Click the [Enable] check box to use the e-mail function.
Configure the conditions for sending e-mail under the
Alert
Settings.
SMTP Server Address Configures the address of the mail server in IP format.
• The address allows not only IP address but also domain
name if the valid DNS server is setup in the
Network...](http://img.usermanuals.tech/thumb/5770/99290/w300_projector_manual_7067_d-25.png "Page 26
24Network Guide020-000475-02 Rev. 1 (06-2012)
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
3.1.5 Mail Settings
Displays and configures e-mail addressing
settings.
Item Description
Send Mail Click the [Enable] check box to use the e-mail function.
Configure the conditions for sending e-mail under the
Alert
Settings.
SMTP Server Address Configures the address of the mail server in IP format.
• The address allows not only IP address but also domain
name if the valid DNS server is setup in the
Network...")
24Network Guide020-000475-02 Rev. 1 (06-2012) LX501/LX601i/LW401/LW551i/LWU421/LWU501i 3.1.5 Mail Settings Displays and configures e-mail addressing settings. Item Description Send Mail Click the [Enable] check box to use the e-mail function. Configure the conditions for sending e-mail under the Alert Settings. SMTP Server Address Configures the address of the mail server in IP format. • The address allows not only IP address but also domain name if the valid DNS server is setup in the Network...
Page 27
25Network Guide020-000475-02 Rev. 1 (06-2012) LX501/LX601i/LW401/LW551i/LWU421/LWU501i 3.1.6 Alert Settings Displays and configures failure & alert settings. Item Description Cover Error The lamp cover has not been properly fixed. Fan Error The cooling fan is not operating. Lamp Error The lamp does not light, and there is a possibility that interior portion has become heated. Temp Error There is a possibility that the interior portion has become heated. Air Flow Error The internal temperature is...
Page 28
![Page 28
26Network Guide020-000475-02 Rev. 1 (06-2012)
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
The Alert Items are shown below.
ItemDescription
Alarm Time Configures the time to alert.
(Only Lamp Time Alarm and Filter Time Alarm.)
SNMP Trap Click the [Enable] check box to enable SNMP Trap alerts.
Send Mail Click the [Enable] check box to enable e-mail alerts.
(Except Cold Start and Authentication Failure
.)
Mail Subject Configures the subject line of the e-mail to be sent.
The length of the subject line can be...](http://img.usermanuals.tech/thumb/5770/99290/w300_projector_manual_7067_d-27.png "Page 28
26Network Guide020-000475-02 Rev. 1 (06-2012)
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
The Alert Items are shown below.
ItemDescription
Alarm Time Configures the time to alert.
(Only Lamp Time Alarm and Filter Time Alarm.)
SNMP Trap Click the [Enable] check box to enable SNMP Trap alerts.
Send Mail Click the [Enable] check box to enable e-mail alerts.
(Except Cold Start and Authentication Failure
.)
Mail Subject Configures the subject line of the e-mail to be sent.
The length of the subject line can be...")
26Network Guide020-000475-02 Rev. 1 (06-2012) LX501/LX601i/LW401/LW551i/LWU421/LWU501i The Alert Items are shown below. ItemDescription Alarm Time Configures the time to alert. (Only Lamp Time Alarm and Filter Time Alarm.) SNMP Trap Click the [Enable] check box to enable SNMP Trap alerts. Send Mail Click the [Enable] check box to enable e-mail alerts. (Except Cold Start and Authentication Failure .) Mail Subject Configures the subject line of the e-mail to be sent. The length of the subject line can be...
Page 29
27Network Guide020-000475-02 Rev. 1 (06-2012) LX501/LX601i/LW401/LW551i/LWU421/LWU501i 3.1.7 Schedule Settings Displays and configures schedule settings. Item Description Daily Configures the daily schedule. Sunday Configures the Sunday schedule. Monday Configures the Monday schedule. Tuesday Configures the Tuesday schedule. Wednesday Configures the Wednesday schedule. Thursday Configures the Thursday schedule. Friday Configures the Friday schedule. Saturday Configures the Saturday schedule. Specific...
Page 30
![Page 30
28Network Guide020-000475-02 Rev. 1 (06-2012)
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
3.1 Projector Web Control - Schedule Settings (continued)
The schedule settings are shown below.
ItemDescription
Schedule Click the [Enable] check box to enable the schedule.
Date (Month/Day) Configures the month and date.
This item appears only when Specific date (No. 1-5) is
selected.
Click the [Apply] button to save the settings.
The current event settings are displayed on the schedule list. To add additional...](http://img.usermanuals.tech/thumb/5770/99290/w300_projector_manual_7067_d-29.png "Page 30
28Network Guide020-000475-02 Rev. 1 (06-2012)
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
3.1 Projector Web Control - Schedule Settings (continued)
The schedule settings are shown below.
ItemDescription
Schedule Click the [Enable] check box to enable the schedule.
Date (Month/Day) Configures the month and date.
This item appears only when Specific date (No. 1-5) is
selected.
Click the [Apply] button to save the settings.
The current event settings are displayed on the schedule list. To add additional...")
28Network Guide020-000475-02 Rev. 1 (06-2012) LX501/LX601i/LW401/LW551i/LWU421/LWU501i 3.1 Projector Web Control - Schedule Settings (continued) The schedule settings are shown below. ItemDescription Schedule Click the [Enable] check box to enable the schedule. Date (Month/Day) Configures the month and date. This item appears only when Specific date (No. 1-5) is selected. Click the [Apply] button to save the settings. The current event settings are displayed on the schedule list. To add additional...