Christie Projector LWU701i User Manual

							80LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide020-000786-02
LIT MAN USR D2
AUDIO menu
AUDIO menu
Select an item from the Audio menu using the ▲/▼ 
cursor buttons, and press the ► cursor button or the 
ENTER button to execute the item. Then perform it 
according to the following table.
 
Item Description
VOLUME Using the ◄/► buttons adjusts the volume of the audio output.
Low  ó High
SPEAKER Using the ▲/▼ buttons turns on/off the built-in speaker.
ON  ó OFF
When OFF is selected, the built-in speaker does not work.
AUDIO SOURCE While the image signal from the input port chosen in step (1) is 
projected, the audio signal from the input port selected in step 
(2) is output to both the AUDIO OUT port and built-in speaker of 
this projector. However, the built-in speaker does not work when 
SPEAKER is set to OFF.
(1)  Choose a picture input port using the ▲/▼ buttons.
Choose AUDIO OUT STANDBY to select the sound output in the 
standby mode. 
(2)  
Select an audio input port or the mute icon using the ◄/► buttons.The icons indicate the following;
No.1: AUDIO IN1 port  No.2: AUDIO IN2 port
No.3: HDMI 1 port  No.4: HDMI 2 port
No.5: DisplayPort  No.6: HDBaseT  port
No.7: LAN port  
 : mutes the sound    
•  Audio input from port numbers 3 to 7 can only be selected by each 
of the picture input ports and AUDIO OUT STANDBY.
• Closed Caption C.C. is automatically activated when 
  is selected 
and an input signal containing Closed Caption C.C. is received. 
This function is available only when the signal is NTSC for  VIDEO 
or COMPUTER IN, and when AUTO is selected for DISPLAY in the 
Closed Caption C.C. menu under the MENU PREFERENCES (
 86
). 
LWU701i
LWU601i/LW651i/LW751i/LX801i 
						

							81LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide020-000786-02
LIT MAN USR D2
MENU PREFERENCES
MENU PREFERENCES
Select an item from the Menu Preferences menu 
using the ▲/▼ cursor buttons, and press the ► 
cursor button or ENTER button to execute the item. 
Then perform it according to the following table.
Item Description
LANGUAGE Using the ▲/▼/◄/► buttons switches the OSD (On Screen 
Display) language.
ENGLISH  ó FRANÇAIS 
ó DEUTSCH 
ó  ESPAÑOL
       
   (shown in the LANGUAGE dialog)   
Press the ENTER or INPUT button to save the language setting.
MENU POSITION Using the ▲/▼/◄/► buttons adjusts the menu position.
To quit the operation, press the 
MENU button on the remote control 
or do not perform any operation for about 10 seconds.
BLANK
Using the ▲/▼ buttons switches the mode for the blank screen.
The blank screen is a screen for the temporarily blanking feature 
(
 37). It is displayed by pressing the 
AV MUTE button on the 
remote control.
My Screen  ó ORIGINAL 
ó BLUE 
ó WHITE 
ó BLACK
       
My Screen :  Screen can be registered by the My Screen item ( 83).
ORIGINAL :  Screen preset as the standard screen.
BLUE, WHITE, BLACK :  Plain screens in each color.
• T
o avoid remaining as an afterimage, the My Screen or ORIGINAL
screen changes to the AUTO BLANK screen after several minutes.
(continued on next page) 
						

							82LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide020-000786-02
LIT MAN USR D2
MENU PREFERENCES
Item Description
AUTO BLANK Using the ▲/▼ buttons switches the mode for the AUTO BLANK 
screen.
BLUE  ó WHITE 
ó BLACK
       
• To avoid remaining as an afterimage, displayed image changes
to the designated blank color screen by AUTO BLANK after several
minutes at the following conditions.
- When My Screen or ORIGINAL is displayed as BLANK screen.
- When start-up screen is displayed.
START UP
Using the ▲/▼ buttons switches the mode for the start-up screen.
The start-up screen is a screen displayed when no signal or an 
unsuitable signal is detected. My Screen  ó ORIGINAL 
ó OFF
       
My Screen :  Screen can be registered by the My Screen item ( 83).
ORIGINAL :  Screen preset as the standard screen.
OFF :  Plain black screen.
• To avoid the image burning into the screen, the START UP screen 
changes to the AUTO BLANK screen after several minutes. 
• When the ON is selected to the My Screen PASSWORD item in 
the SECURITY menu (
102), the START UP is fixed to My Screen.
(continued on next page) 
						

							83LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide020-000786-02
LIT MAN USR D2
MENU PREFERENCES
Item Description
My Screen You can capture an image for use as a My Screen image which 
can be used as the BLANK screen and START UP screen. Display 
the image you want to capture before executing the following 
procedure.
(1)  Selecting this item displays a dialog 
titled “My Screen”. It asks you if you 
start capturing an image from the 
current screen.Wait for the target image to be displayed, and press the  ENTER 
or INPUT button when the image is displayed. The image 
freezes and the frame for capturing appears. 
To stop performing, press the  RESET button on the remote 
control. 
(2)  Using the ▲/▼/◄/► buttons adjusts  the frame position. 
Move the frame to the position of the 
image which you want to use. The frame 
may not be able to be moved for some 
input signals. 
To start registration, press the ENTER 
or INPUT button on the remote control.To restore the screen and return to the previous dialog, press the 
RESET button on the remote control. 
Registration may take several minutes. 
When the registration is completed, the registered screen and 
the following message is displayed for several seconds:
“My Screen registration is finished.”
If the registration failed, the following message is displayed: “A capturing error has occurred. Please try again.” 
• This function cannot be selected when ON is selected for the My 
Screen Lock item (
 84).
• This function cannot be selected when ON is selected for the My 
Screen PASSWORD item in SECURITY menu (
 102).
• This function is unavailable for a signal from the  LAN, HDMI 1 / 2, 
HDBaseT  or SDI port.
(continued on next page) 
						

							84LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide020-000786-02
LIT MAN USR D2
MENU PREFERENCES
Item Description
My Screen Lock Using the ▲/▼ buttons turns on/off the My Screen lock function.
ON  ó OFF
When the ON is selected, the item My Screen is locked. Use this 
function for protecting the current My Screen.
• This function cannot be selected when the ON is selected to the 
My Screen PASSWORD item in SECURITY menu (
 102).
SOURCE NAME Each input port for this projector can have a name applied to it.
(1)  Use the ▲/▼ buttons on the MENU PREFERENCES to select 
SOURCE NAME and press the ► or ENTER button.  
The SOURCE NAME menu is displayed.
(2)  Use the ▲/▼ buttons on the SOURCE NAME menu to select  the port to be named and press the ► button. The SOURCE 
NAME dialog is displayed. 
Right side of the menu is blank until a name is specified.
(3)  Select an icon you want to assign to the  port in the SOURCE NAME dialog.  
The name assigned to the port is 
automatically switched according to your 
icon selection. Press the  ENTER or INPUT  
button to determine your icon selection.
(4)   Select a number you want to assign to the 
port along with the icon. You can select 
the number either from blank (no number 
assigned), 1, 2, 3, or 4.  
Then press the ENTER or INPUT button.
(5)  If you want to modify the name assigned to the port, select  CUSTOM NAME and press the ENTER or INPUT button. 
(continued on next page)
LWU701i
LWU601i/LW651i/LW751i/LX801i
LWU701i
LWU601i/LW651i/LW751i/LX801i 
						

							85LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide020-000786-02
LIT MAN USR D2
MENU PREFERENCES
Item Description
SOURCE NAME (continued )(6)  The current name is displayed on the 
first line. Use the ▲/▼/◄/► buttons and 
the ENTER or INPUT button to select 
and enter characters. To erase one 
character at a time, press the RESET 
button or press the ◄ and INPUT button 
simultaneously. Also if you move the 
cursor to DELETE or CLEAR ALL on 
screen and press the  ENTER or INPUT 
button, one or all characters are erased. 
The name can be a maximum of 16 
characters.
(7)  To change an already inserted character,  press the ▲ button to move the cursor to 
the first line, and use the ◄/► buttons to 
move the cursor on the character to be 
changed. 
After pressing the ENTER or INPUT button, the character is 
selected.  Then, follow the same procedure as described at the 
item (6) above.
(8)   To finish entering text, move the cursor to the OK on screen and 
press the ►, ENTER or INPUT button. To revert to the previous 
name without saving changes, move the cursor to the CANCEL 
on screen and press the ◄, ENTER or INPUT button.
TEMPLATE Using the ▲/▼ cursor buttons switches the mode for the template 
screen.
Press the ► cursor (or the ENTER) button to display the selected 
template, and press the ◄ cursor button to close the displayed 
screen.
The last selected template is displayed when the 
MY BUTTON
allocated to the TEMPLATE function is pressed (
 89).
TEST PATTERN  ó DOT-LINE1 
ó DOT-LINE2 
ó DOT-LINE3
                                                                                          

STACK  ó 
MAP2 
ó MAP1 
ó CIRCLE2 
ó CIRCLE1 
ó DOT-LINE4
You can turn a map upside down and scroll it horizontally when 
MAP1 or MAP2 is selected. To invert or scroll the map, display 
the guidance by pressing the  RESET button on the remote three 
seconds or more when MAP1 or MAP2 appears.
(continued on next page) 
						

							86LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide020-000786-02
LIT MAN USR D2
MENU PREFERENCES
Item Description
Closed Caption  C.C. The Closed Caption C.C. is the function that 
displays a transcript or dialog of the audio 
portion of a video, files or other presentation 
or other relevant sounds. It must have NTSC 
format video or 480i@60 format component 
video source supporting Closed Caption C.C. 
feature to utilize this function.
It may not work properly, depending on equipment or signal source. 
In this case, turn off the Closed Caption.
DISPLAY
Select Closed Caption DISPLAY setting from following options using 
▲/▼ buttons.
AUTO  ó ON 
ó OFF 
   
AUTO :  Closed Caption automatically appears when the input signal 
(Closed Caption C.C. compatible) from the port with the 
mute icon set at AUDIO SOURCE is selected.
ON : Closed Caption is on.
OFF : Closed Caption is off.
• The caption is not displayed when the OSD menu is active.
• The Closed Caption is the function to display the dialogue, 
narration, and / or sound effects of a television program or other 
video sources. The Closed Caption availability depends upon 
broadcaster and/or content.
MODE
Select Closed Caption MODE setting from following options using 
▲/▼ buttons.
CAPTIONS  ó TEXT
CAPTIONS : Display Closed Caption.
TEXT :  Display Text data, which is for additional information such as  news reports or a TV program guide. The information covers 
the entire screen. Not all of the Closed Caption C.C. program 
has Text information.
CHANNEL
Select Closed Caption CHANNEL from following options using ▲/▼ 
buttons.
1 ó  2 
ó 3 
ó 4
1: Channel 1, primary channel / language
2: Channel 2
3: Channel 3
4: Channel 4
The channel data may vary, depending on the content. Some 
channel might be used for secondary language or empty. 
						

							87LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide020-000786-02
LIT MAN USR D2
OPTION menu
OPTION menu
Select an item from the Option menu using the ▲/▼ 
cursor buttons, and press the ► cursor button or 
ENTER button to execute the item. Then perform it 
according to the following table.
Item Description
SOURCE SKIP The ports can be set to be ignored in searching by the AUTO 
SEARCH function (

below
) or in selecting by buttons on the control 
panel. 
(1)  Choose a picture input port using the ▲/▼ buttons.
(2)  Using the ◄/►buttons turns on/off the SOURCE SKIP function.
NORMAL  ó SKIP
The port that is set to SKIP is ignored.
•  You cannot set SKIP to all ports at the same time.
• This setting is not valid when in the PbyP / PIP  mode (
53).
AUTO SEARCH Using the ▲/▼ buttons turns on/off the automatic signal search 
function.
ON  ó OFF
When ON is selected, detecting no signal automatically cycles 
through input ports in the following order. The search is started 
from the current port. When an input is found, the projector stops 
searching and display the image.
          LAN   ð   COMPUTER IN 
ð   HDMI 1 
                            
        VIDEO                                   HDMI 2 
                            
          SDI*    ï   HDBaseT   
ï   DisplayPort
* LWU701i only
(continued on next page)
LWU701i
LWU601i/LW651i/LW751i/LX801i 
						

							88LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide020-000786-02
LIT MAN USR D2
OPTION menu
Item Description
DIRECT POWER  ON Using the ▲/▼ buttons turns on/off the DIRECT POWER ON 
function.
ON  ó OFF
When set to ON, the lamp in projector is automatically turned on without 
the usual procedure (
 35)
, only when the projector is supplied with the 
power after the power was cut while the lamp was on.
• This function does not work as long as the power has been 
supplied to the projector while the lamp is off.
• After turning the lamp on by the DIRECT POWER ON function, 
if neither input nor operation is detected for about 30 minutes, the 
projector is turned off, even though the AUTO POWER OFF function 
(
 below) is disabled.
AUTO POWER  OFF Using the ▲/▼ buttons adjusts the time to count down to 
automatically turn the projector off.
Long (max. 99 minutes)  ó Short (min. 0 minute = DISABLE)
When the time is set to 0, the projector is not turned off 
automatically.
When the time is set to 1 to 99, and when the passed time with  
no-signal or an unsuitable signal reaches at the set time, the 
projector lamp is turned off. 
If one of the projector's buttons or the remote control buttons 
is pressed or one of the commands (except get commands) is 
transmitted to the CONTROL port during the corresponding time, 
the projector is not turned off.
Refer to the section Turning off the power  (
35).
SHUTTER TIMER Using the ▲/▼ buttons sets the time from closing the shutter to 
automatically turning the projector off.
1h  ó 3h 
ó 6h 
• The shutter opens automatically when turning the projector on 
again.
(continued on next page) 
						

							89LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide020-000786-02
LIT MAN USR D2
OPTION menu
Item Description
MY BUTTON
This item is to assign one of the following functions to  MY BUTTON 
(1 to 4) on the remote control (
 7).
(1)  Use the ▲/▼ buttons on the MY BUTTON menu to select a  button from MY BUTTON - 1 to 4 and press the ► or  ENTER 
button to display the MY BUTTON setup dialog. 
(2)  Then using the ▲/▼/◄/► buttons sets one of the following  functions to the chosen button. Press the ENTER or INPUT 
button to save the setting.
MY IMAGE: Displays the MY IMAGE menu.(
 5. My Image 
Function in the Network Guide )
MESSENGER: Turns the messenger text displayed on the screen  on/off (
 6. Messenger Function in the Network Guide
). 
When there is no transferred text data to display, the message 
”NO MESSENGER DATA" appears.
BLANK: Switches the BLANK function to on or off.
SHUTTER: Turns the shutter closed and opened (
 52).
PbyP / PIP SWAP: Swaps the picture on the right with one on  the left in the PbyP mode. Swaps the primary picture and the 
secondary picture in the PIP mode. (
 53)
PIP POSITION: Toggles the PIP position.
INFORMATION: Displays SYSTEM_INFORMATION,   INPUT_INFORMATION (
 99), WIRELESS INFORMATION, 
WIRED INFORMATION or nothing.
MY MEMORY: Loads one of adjustment data stored (
 65). 
When more than one data are saved, the adjustment  
changes every time the  MY BUTTON is pressed.
When no data is saved in memory, the 
dialog "No saved data" appears.
When the current adjustment is not 
saved to memory, the dialog as shown in 
the right appears.
To keep the current adjustment, press  
the ► button to exit. Otherwise loading a data overwrites the 
current adjusted condition.
DYNAMIC IRIS: Changes the dynamic iris mode (
 62).
PICTURE MODE: Changes the PICTURE MODE (
 63).
FILTER RESET: Displays the filter hours reset confirmation dialogue  (
 76).
TEMPLATE: Makes the template pattern selected to the TEMPLATE  item (
 85) appear or disappear.
MUTE: Turns the audio mute on/off.
RESOLUTION: Turns on/off the RESOLUTION dialog (
 72).
ECO MODE: Changes the ECO MODE dialog (
 75).
(continued on next page)