Christie Projector DWX555-GS User Manual

Section 4: OPERATION
GS Series User Manual020-000724-01 Rev. 1 (05-2014)4-27
- Enter the IP address range, netmask and default gateway for the wire-
less LAN.
• SNMP Panel - The SNMP (Simple Network Management Protocol) interface provides network administrators with a common way to manage their network 
devices from a single remote location. SNMP allows an administrator to 
query a number of devices to see thei r current status/ configuration. It 
also allows operators to change conf iguration values and...

Section 4: OPERATION
GS Series User Manual020-000724-01 Rev. 1 (05-2014)4-28
4.9.6 Tools
To Use the Tools tabbed pages to control Size & Position, Image Settings, 
Configuration, Light Source, Input Switching & PIP and Test Pattern.
4.9.7 Administrator Page
Add or delete a user or change password 

Section 4: OPERATION
GS Series User Manual020-000724-01 Rev. 1 (05-2014)4-29
4.9.8 About Page
• Version TabView the main firmware version, netwo rk firmware version, projector model 
name, and projector serial number.
• License Tab The license information of the computer program is displayed. 

Section 4: OPERATION
GS Series User Manual020-000724-01 Rev. 1 (05-2014)4-30
4.10 Christie Presenter
The Christie Presenter application allows a remote desktop from a host PC to 
be displayed on the network display through Ethernet, USB, or wireless 
transports. It can adapt to different network settings (DHCP, fixed IP, and direct 
link by USB/Ethernet cable).
Christie Presenter can be downloaded fr om the Christie website or from the 
web page of the projector.
4.10.1 Connect to the Projector
1....

Section 4: OPERATION
GS Series User Manual020-000724-01 Rev. 1 (05-2014)4-31
Power on the Projector.
 Obtain the WiFi SSID from the OSD menu Main Menu >  
Configuration > Communications > WLAN
 Connect your PC device to the wireless SSID for the selected  
projector . Example: Christie@0111000123.
4.10.2 Install Christie Presenter software
1. Use a web browser to connect to the projectors network address (Default  
address 192.168.1.100)
2. Download and install the Christie Presenter Software 

Section 4: OPERATION
GS Series User Manual020-000724-01 Rev. 1 (05-2014)4-32
3. Configure the Christie Presenter Software. The name entered is used to 
identify all computers connected to the  projector via  the Christie Presenter 
software via either wired or wireless connections.  The Network Display 
Management -> Device Management tab will show all current connections.
4.10.3 Use Christie Presenter
1. Press the autorun icon in the system tr ay to pause or play the USB display. 

Section 4: OPERATION
GS Series User Manual020-000724-01 Rev. 1 (05-2014)4-33
2. After starting the Christie Presenter application, the main window can been seen (shown below).
Connect and search network display 1 Click the button   to enter into the connection menu section.
IconDescription
Connect and search network display
Stop/start displaying desktop contents to 
connected network display
Select display region
Configure Christie Presenter
Manage all connected network displays
Disconnect all connections 

Section 4: OPERATION
GS Series User Manual020-000724-01 Rev. 1 (05-2014)4-34
2 If the IP address of the projector is known, enter the IP address and click the Connect button. If the IP address is not known, click the 
Search button to search for the pr ojector on the network and select 
the projector to which you want to connect. Select the option Directly 
in order to proceed to the log in interface.
3 Input User type and Password in  the log-in interface. Select the 
display port (the default is full...

Section 4: OPERATION
GS Series User Manual020-000724-01 Rev. 1 (05-2014)4-35
Select display regionOnce the connection is set up, click the button   to select the size of 
the projection region: FullScreen, FixedSize, or Alterable.
•  FullScreen: The default  capture mode turns to Full screen when the  
program is launched. At that time,  if screen capture starts, the image of  the 
whole screen is transferred to a remote network display.
•  FixedSize: FixedSize mode allows  the users to place a frame on...

Section 4: OPERATION
GS Series User Manual020-000724-01 Rev. 1 (05-2014)4-36
Configure Christie PresenterClick the button   to configure Christie Presenter for Basic Setting  
and Advanced Setting.
•  Basic Setting: Select language, change the region size of fixed size  
capture mode, and select if noti fication message popup is allowed.
•  Advanced Setting: Select the qualit y of JPEG image, YUV sample format 
and network port setting. (The Fixed port is Port 5900)