Christie Projector DUW350S User Manual

							Section 4: USeR CoNTRolS
41CAPTIVA DUW350S/CAPTIVA DHD400S User Manual020-000816-01  Rev. 1 (07-2015)
When making a direct connection from your computer to the projector
Step 1: Find an IP Address (192.168.0.100) from LAN function of projector.
IP Address
Step 2:  Select apply and press “Enter” button to submit function or press \
“menu” key to 
exit.
Step 3:  To open Network Connections, 
click Start, click Control Panel , 
click Network and Internet 
Connections, and then click 
Network Connections. Click the 
connection you want to configure, 
and then, under  Network Tasks 
, click Change settings of this 
connection .
Step 4:  On the General tab, under 
This connection uses the 
following items , click Internet 
Protocol (TCP/IP) , and then click 
“Properties.”
Step 5:   Click Use the following IP 
address, and type as below:
1) IP address: 192.168.0.100
2) Subnet mask: 255.255.255.0
3) Default gateway:192.168.0.254
Step 6:   
To open Internet Options, click IE 
web browser, click Internet Options, 
click the Connections tab and click 
“LAN Settings...”.
Step 7:   The Local Area Network (LAN) 
Setting dialog appears. In the 
Proxy Server area , cancel the 
Use a proxy server for your LAN  
checkbox, then click “OK” button 
twice.
Step 8: Open Internet Explorer and type  the IP address 192.168.0.100 in the 
address box. Press Enter.         
						

							Section 4: USeR CoNTRolS
42CAPTIVA DUW350S/CAPTIVA DHD400S User Manual020-000816-01  Rev. 1 (07-2015)
Crestron RoomView Control Tool
Crestron RoomView™ provides a central monitoring station for 250+ control systems o\
n 
a single Ethernet network (more are possible, the number depends on the\
 combination of 
IP ID and IP address). Crestron RoomView monitors each projector, including projector�s 
online status, system power, lamp life, network setting and hardware faults, plus any 
custom attribute as defined by the Administrator. The Administrator can add, delete, or edit 
room information, contact information and events, which are logged autom\
atically by the 
software for all users. (Operation UI as following image)
1. Main Screen
2. Edit Room
NOTE:Crestron RoomView’s function is set according to the products’ models and specifications. ™ 
						

							Section 4: USeR CoNTRolS
43CAPTIVA DUW350S/CAPTIVA DHD400S User Manual020-000816-01  Rev. 1 (07-2015)
3. Edit Attribute
4. Edit Event
For further information, please visit:
http://www.crestron.com & www.crestron.com/getroomview. 
						

							Section 5: MUlTiMedia
44CAPTIVA DUW350S/CAPTIVA DHD400S User Manual020-000816-01  Rev. 1 (07-2015)
MULTIMEDIA5. 
Accessing Multimedia Files5.1 
This	projector	supports	two	methods	to	project	the	media	files	(photos,	videos,	music, documents) stored on following devices:
WIFI	dongle	-	wirelessly	access	the	media	files	stored	on	your	mobile	a. phone, tablet PC, notebook, or desktop.
USB	flash	drive	-	directly	access	the	media	files	stored	in	the	device.b. 
How to access Multimedia mode5.1.1 
Plug	a	wireless	dongle	or	a	USB	flash	drive	into	the	USB	connector	at	1. 
the back of projector.
E62405SPR
Press “INPUT” 2. on the remote control or on the control panel to turn on 
the projector. When the Input menu appears, press the 
  keys to 
select	“Multimedia”	and	the	“Enter”	key	to	confirm.
NOTE: Suggest to have the WIFI dongle with Realtek RTL8192CU chipset.    ™
The recommended WIFI dongles are WL-7200-V1, Abocom WU5508, EDUP EP-N152\
8.   
						

							Section 5: MUlTiMedia
45CAPTIVA DUW350S/CAPTIVA DHD400S User Manual020-000816-01  Rev. 1 (07-2015)
 Mobile Display
To	access	the	media	files	stored	on	your	mobile	device	or	tablet	PC,	do	the	
folllowing:
On 
1. Multimedia menu, select Mobile/Tablet.
Multimedia
Mobile/Tablet
Laptop
Desktop
USB Disk
On your mobile device or tablet PC, download “EZview” application \
App 2. 
Store (iOS) or Play Store (Android).
Mobile/TabletMedia Display
Install app "EZview" from 
Google/app store Enable your phone WIFI function, 
and search for AP to connect. Enter password
Password
AP Name
Open "EZview" and enter 
PCTOOL password
Enable your mobile device or tablet PC WiFi function, and search the AP 3. 
name listed in the Wi-Fi network list.
On the initial connection, you will be prompted to enter a password. Ent\
er 
4. 
the password.
Launch “EZview” application and enter the PCTOOL password.
5. 
Wait until the connection is established. The media files on your mobile 6. 
device or tablet PC can be accessed using the projector. 
						

							Section 5: MUlTiMedia
46CAPTIVA DUW350S/CAPTIVA DHD400S User Manual020-000816-01  Rev. 1 (07-2015)
Laptop Display
To	access	the	media	files	stored	on	your	laptop/notebook,	do	the	folllowing:
On 1. Multimedia menu, select laptop.
Multimedia
Laptop
Mobile/Tablet
Desktop
USB Disk
Settings
Enable your laptop/notebook WiFi function, and search the AP name listed 2. 
in the Wi-Fi network list.
laptopMedia Display
Enable your phone WIFI function, 
and search for AP to connect. Enter password
open browser and enter ip 
address below and select & install 
application by OS open EZview and enter control code 
on the left-down side of the screen
Password IP Address Control Code
AP Name
On the initial connection, you will be prompted to enter a password. Ent\
er 3. 
the password.
Open your web browser and type the IP address. Then select “Wifi” on 
4. 
the	left	side	of	the	screen	and	install	application	required	by	the	operation	
system.
Launch “EZview” application and enter the control code shown on th\
e right-
5. 
bottom side of the screen.
Wait until the connection is established. The media files on your laptop/
6. 
notebook can be accessed using the projector. 
						

							Section 5: MUlTiMedia
47CAPTIVA DUW350S/CAPTIVA DHD400S User Manual020-000816-01  Rev. 1 (07-2015)
Desktop Display
To	access	the	media	files	stored	on	your	desktop,	do	the	folllowing:
On 1. Multimedia menu, select desktop.
Multimedia
Desktop
Laptop
USB Disk
Settings
Open your web browser and enter the IP address. Then select “Wifi” on 2. 
the	left	side	of	the	screen	and	install	application	required	by	the	operation	
system.
desktopMedia Display
open browser and enter ip 
address below and select & install 
application by OS open EZview and enter control code 
on the left-down side of the screen
IP Address Control Code
Launch “EZview” application and type the control code shown on the\
 right-3. 
bottom side of the screen.
Wait until the connection is established. The media files on your desktop 
4. 
can be accessed using the projector. 
						

							Section 5: MUlTiMedia
48CAPTIVA DUW350S/CAPTIVA DHD400S User Manual020-000816-01  Rev. 1 (07-2015)
USB Storage Display
To	access	the	media	files	stored	on	your	USB	flash	drive,	do	the	folllowing:
Supported File Format
Multimedia Category File Format
PhotoBMP, JPG, PNG
Music MP3, WMA
Video AVI, MOV, MP4, RM, RMVB, DAT, MPG, ISO, TS, 
MKV, VOB, and WMV
Document WORD, EXCEL, PPT, PDF
On 1. Multimedia menu, select USB disk.
Multimedia
Desktop
USB Disk
Settings
Use the 2.   keys to select the file category and press the “Enter” key.   
						

							Section 5: MUlTiMedia
49CAPTIVA DUW350S/CAPTIVA DHD400S User Manual020-000816-01  Rev. 1 (07-2015)
Multimedia
Desktop
USB DiskPhoto
Settings Video
Music
Office	Viewer
Use the 3.   keys to select the file to view/play and press the “Enter” key 
to confirm.
Configuring Multimedia Settings
To change the settings, do the folllowing:
On 
1. Multimedia menu, select Settings. 
Multimedia
USB Disk
Settings
Use the 2.   keys to select the desired menu option and press the 
“Enter” key to enter the submenu.     
						

							Section 5: MUlTiMedia
50CAPTIVA DUW350S/CAPTIVA DHD400S User Manual020-000816-01  Rev. 1 (07-2015)
Multimedia
USB DiskVideo
Photo
Music
WiFi
SettingsSystem
System: Select this option to view the firmware version and update 
•	
firmware.
Video: Select this option to change the display ratio and set the 
•	
repeat mode.
Photo: Select this option to change the display ratio, slideshow 
•	
pattern, and slideshow duration.
Music: Select this option to set the repeat mode  .•	
WiFi: Select this option to configure the Wi-Fi connection.
•	
Use the 
3.   keys to select the adjust/select the setting and press the 
“Enter” key to confirm.