Christie Projector DHD555-GS User Manual

Section 2: INTRODUCTION
GS Series User Manual020-000724-01 Rev. 1 (05-2014)2-3
Left View
Right View
Ind.Part NameDescription
1Cooling Air Vents 
(Intake)Keep these vents unobstructed to prevent the 
projector from overheating.
2 LED Status Indicators Displays the status of the projector. They are (from left 
to right): LIGHT, STATUS, and PIC MUTE.
3Built-in KeypadControls the projector.
4 Cooling Air Vents
 
(Exhaust) Keep these vents unobstructed to prevent the 
projector from overheating.
1
2
3
4 

Section 2: INTRODUCTION
GS Series User Manual020-000724-01 Rev. 1 (05-2014)2-4
2.2 Built-in Keypad
Ind.Part NameDescription
1PowerTurn the projector on or off
2 Menu Display menus
3EnterConfirm a selection
4 Auto Automatically optimize image
5LensAdjust the lens vertical or horizontal offset setting
6 Focus Adjust focus
7ExitReturn to previous level or exit menus if at top level
8 Arrow Keys • Adjust a setting UP or DOWN • Navigate within a menu
9InputSelect an input for the main or PIP/PBP image
10...

Section 2: INTRODUCTION
GS Series User Manual020-000724-01 Rev. 1 (05-2014)2-5
2.3 Input/Output (I/O) Panel
 
 
Ind.Connector NameInd.Connector Name
1HDBaseT9Component IN
2 Remote IN 10 RS232
3Remote OUT11Mini USB
4 HDMI 12 USB Type A
5VGA-IN13Ethernet
6 VGA OUT 14 CVBS
7Display Port15S-Video
8DVI
HDBaseT REMOTE IN
GREEN/Y BLUE/PB RED/PR RS232 USB MINI USB
ETHERNET CVBS S-VIDEO
REMOTE
OUT HDMI VGA IN VGA OUT DISPLAY PORT DVI
1
92345678
101213141511 

Section 2: INTRODUCTION
GS Series User Manual020-000724-01 Rev. 1 (05-2014)2-6
2.4 Remote Control
 
16
17
18
19
20
21
22
24
25
26
27
28
29
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
23 

Section 2: INTRODUCTION
GS Series User Manual020-000724-01 Rev. 1 (05-2014)2-7
Ind.Part NameDescription
1Picture MuteDisplay or blank the video image.
2 Power on Turn projector ON.
3GammaAdjust mid-range levels.
4 Bright Adjust amount of light in the image.
5PIP/PBPTurn PIP/PBP ON/OFF.
6 Size Adjust the PIP/PBP size
7Number KeysEnter a number, such as a channel, value, etc.
8 Help Display cont ext-sensitive help.
9MenuDisplay menus.
10 Arrow Keys • Adjust a setting UP or DOWN.
• Navigate within a menu....

Section 2: INTRODUCTION
GS Series User Manual020-000724-01 Rev. 1 (05-2014)2-8
2.5 LED Status Indicators
The LED status indicators are located on the right side of the projector. Each
LED is defined below.
• LIGHT LED
• STATUS LED
LED StatusProjector State
Red (flashing)When projector has lost ov er 60% initial luminance
Orange (solid) Laser diode time has expired
Green (solid)Laser diode is on and operating correctly
Off Laser diode is off
LED StatusProjector State
OffAC power is off (without AC plug...

Section 2: INTRODUCTION
GS Series User Manual020-000724-01 Rev. 1 (05-2014)2-9
•  PICTURE MUTE LED
LED StatusProjector State
Green (solid)Light is on - image is displayed
Orange (solid) Light is on - image is blank 

Section 2: INTRODUCTION
GS Series User Manual020-000724-01 Rev. 1 (05-2014)2-10 

Section 3: INSTALLATION
GS Series User Manual020-000724-01 Rev. 1 (05-2014)3-1
3. INSTALLATION
3.1 Connect to Computer
NOTE:The diagram shows the cables/connectors that may be used to connect to various devices.
 Due to the difference in applications for each country, the accessories required in some regions may be different from those 
shown.
 This diagram is for illustrative purposes only, and does NOT indicate that these accessories are supplied with the projector.
Ind.Connector NameInd.Connector...

Section 3: INSTALLATION
GS Series User Manual020-000724-01 Rev. 1 (05-2014)3-2
3.2 Connect to Video Equipment
NOTE:The diagram shows the cables/connectors that may be used to connect to various devices.
 Due to the difference in applications for each country, the accessories required in some regions may be different from those 
shown.
 This diagram is for illustrative purposes on ly, and does NOT indicate that these accessories are supplied with the projector.
Ind.Connector NameInd.Connector...