Christie Projector DHD400S User Manual

Section 3: iNSTallaTioN
21
DUW350S
Diagonal length (inch) size of 16:9 Screen Screen Size W x H
Projection Distance (D)
Offset (Hd)
(mm) (inch) (mm)(inch)
Width Height WidthHeight widetelewide tele(mm) (inch)
120 285.4 107.0  112.4  42.1 46.7  NA18.4  NA36.9  14.5 
125 297.3 111.5 117.0  43.9 49.7  NA19.6  NA38.2  15.0 
130 309.2 115.9 121.7  45.6 52.6  NA20.7  NA39.5  15.6 
135 321.1 120.4 126.4  47.4 55.6  NA21.9  NA40.8  16.1 
140 333.0 124.9 131.1  49.2 58.6  NA23.1  NA42.0  16.5 
NOTE: This table is...

Section 4: USeR CoNTRolS
22
USER CONTROLS4. 
Control Panel & Remote Control4.1 
Control Panel4.1.1 
Using the Control Panel
POWERRefer to the “Power On/Off the Projector” section on 
pages 16- 17.
Enter  Press Enter to 
confirm	your	item	selection.
INPUTPress INPUT to select an input signal.
MENU Press MENU to launch the on-screen display (OSD) 
menu. To exit OSD, press MENU again.
Four Directional Select 
Keys Use 
    to select items or make adjustments 
to your selection.
LAMP LED Refer to the LED...

Section 4: USeR CoNTRolS
23
Remote Control4.1.2 
Using the Remote Control
Infrared 
transmitterSends signals to the projector.
LED LED Indicator.
Power  
Refer to the “Power On/Off the 
Projector” section on pages  16-17.
Exit Press “Exit” to close the OSD menu.
Zoom in Zoom in the projector display.
Reset Return the adjustments and settings to 
the factory default values (except for 
lamp counter).
Zoom out Zoom out the projector display.
Enter
Confirm	your	item	selection.
Input Press “Input” to select...

Section 4: USeR CoNTRolS
24
Using the Remote Control
VGA1Press “VGA1” to choose VGA IN 1 
connector.
Black screen Momentarily turns off/on the audio and 
video.
HDMI1  Press “HDMI1” to choose HDMI IN 1 
connector.
HDMI2 Press “HDMI2” to choose HDMI IN 2 
connector.
VGA2 Press “VGA2” to choose VGA IN 2 
connector.
Video Press “Video” to choose Composite 
video source.
Screen freeze Pause the screen image. Press again 
to resume the screen image.
Image Select the display mode from Bright, 
PC, Movie, Game,...

Section 4: USeR CoNTRolS
25
imagePC
White
Color Mode
Wall Color
Brightness
Contrast
Sharpness
Saturation
Hue
Gamma
Back
Enter
Select
On-screen Display Menus4.2 
The Projector has multilingual On-screen Display menus that 
you can use to make image adjustments and change a variety 
of settings.
How to operate4.2.1 
To open the OSD menu, press “Menu” on the Remote Control or 
1. 
Projector Keypad.
When OSD is displayed, use the 
2
.   keys to select any item in the 
main menu. While making a selection on a...

Section 4: USeR CoNTRolS
26
Image4.2.2 
imagePCWhite
Color Mode
Wall Color
Brightness
Contrast
Sharpness
Saturation
Hue
Gamma
Back
Enter
Select
Color Mode
There are many factory presets optimized for various types of images. Us\
e 
the	◄	or	►	button	to	select	the	item.
Bright: For brightness optimization.
•	
PC: For meeting presentation.
•	
Movie: For playing video content.
•	
Game: For game content.
•	
User: Memorize user �s settings.•	
Wall Color
Use this function to obtain an optimized screen image...

Section 4: USeR CoNTRolS
27
Sharpness
Adjust the sharpness of the image.
Press	the	◄	button	to	decrease	the	sharpness.•	
Press	the	►	button	to	increase	the	sharpness.•	
Saturation
Adjust a video image from black and white to fully saturated color.
Press	the	◄	button	to	decrease	the	amount	of	saturation	in	the	image.•	
Press	the	►	button	to	increase	the	amount	of	saturation	in	the	image.•	
Hue
Adjust the color balance of red and green.
Press	the	◄	button	to	increase	the	amount	of	green	in	the	image.•...

Section 4: USeR CoNTRolS
28
Configuration4.2.3 
ConfigurationAspect RatioAuto
Phase
Clock
H. Position
V. Position
Digital Zoom
V. Keystone
Orientation Front Ceiling
Back
Enter
Select
Aspect Ratio
Auto: Keep the image with original width-height ratio and maximize the 
•	
image to fit native horizontal or vertical pixels.
4:3: The image will be scaled to fit the screen and displayed using a 4:3 
•	
ratio.
16:9: The image will be scaled to fit the width of the screen and the height 
•	
adjusted to display...

Section 4: USeR CoNTRolS
29
V. Position
Press	the	◄	button	to	move	the	image	down.•	
Press	the	►	button	to	move	the	image	up.•	
Digital Zoom
Press	the	◄	button	to	reduce	the	size	of	an	image.•	
Press	the	►	button	to	magnify	an	image	on	the	projection	screen.•	
V. Keystone
Press	the	◄	or	►	button	to	adjust	image	distortion	vertically.	If	the	image	
looks trapezoidal, this option can help make the image rectangular.
Orientation
Front: The image is projected straight on the screen.
•	
Front Ceiling: This is...

Section 4: USeR CoNTRolS
30
Settings4.2.4 
SettingsEnglish
Off
Off
Off
Off Input
Language
OSD Position
Closed Caption
VGA Output (Standby)
LAN (Standby)
VGA-2 (Function)
Test Pattern
Factory Reset
Back
Enter
Select
Language
Choose	the	multilingual	OSD	menu.	Press	the	◄	or	►	button	into	the	sub	
menu	and	then	use	the	▲	or	▼	button	to	select	your	preferred	language.	
Press	►	on	the	remote	control	to	finalize	the	selection.
Language
Back
Enter
Select
OSD Position
Choose the menu location on the display...