Christie Projector D4K2560 User Manual

   Content
D4K2560 User Manual11
020-101076-04 Rev. 1 (01-2015)
Enable warping and blending  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Send error notifications to specified devices  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Menus . . . . . . . . . . . .  . . . . . . . . . . . . . . . . . . . . .  . . . . . . . . . . . . . . . . . . . . 50
Touch panel controller  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

   Content
D4K2560 User Manual12
020-101076-04 Rev. 1 (01-2015)
Projector does not power on   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Lamp does not ignite   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Lamp suddenly turns off   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Flicker, shadows or dimness   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

D4K2560 User Manual13
020-101076-04 Rev. 1 (01-2015)
Introduction
This manual is intended for professionally trained  operators of Christie high-brightness projection 
systems. These operators are qualified to replace th e lamp and air filters, but should not attempt to 
install or service the projector.
Only accredited Christie technicians who are kn owledgeable about the hazards associated with 
high-voltage, ultraviolet exposure, and the high te mperatures generated by the projector lamp are...

   Introduction
D4K2560 User Manual14
020-101076-04 Rev. 1 (01-2015)
Installation safety and warning guidelines
AC/power precautions
To correctly install this projector, a certified electrician must install a permanent three-phase 
connection to the lamp power supply (LPS). The LP S projector outlet is used to supply power to the 
projector head. Operate the projector at the recommended voltage.
Danger!  Failure to comply with the followin g results in death or serious injury.
• This product must be...

   Introduction
D4K2560 User Manual15
020-101076-04 Rev. 1 (01-2015)
Lamp precautions
Lamps used in the projector are under high pressure and must be handled with caution. Lamps can 
explode and cause serious personal injury if dropped or mishandled.
Danger!  Failure to comply with the followin g results in death or serious injury.
• Never attempt to access the lamp compartment while the lamp is on. Wait at least 10 minutes after  the lamp turns off before powering down, disc onnecting from AC, and...

   Introduction
D4K2560 User Manual16
020-101076-04 Rev. 1 (01-2015)
Product safety labels
Indicates the presence  of a grounding point.
Indicates the presence of  an earth grounding point.
Indicates the presence of a dangerous condition or situation.
Indicates the presence of a pinch hazard. To avoid personal injury, ke ep hands clear and loose clothing 
tied back.
Indicates the presence of a hot surface. To avoid pe rsonal injury, always allow the projector to cool 
down for a minimum of 10 minutes...

   Introduction
D4K2560 User Manual17
020-101076-04 Rev. 1 (01-2015)
Projector overview
The D4K2560 is a professional quality, easy-to-use, split-body projector using Digital Light 
Processing (DLP™) technology from Texas Inst ruments. Integrating smoothly into traditional 
projection environments; the D4K2 560 interfaces with local networks throughout the world, for 
multimedia presentations from a variety of format s, to offer stunning wide screen, high-resolution 
4K images at 60 frames per second....

   Introduction
D4K2560 User Manual18
020-101076-04 Rev. 1 (01-2015)
Key features
• 3-chip 4K DLP™ light engine
• 4096 x 2160 native pixel format
• 2.0 and 3.0 kW Xenon lamps available
• Warp and blend of projected images
• Supports screens up to approximately 100 feet in width
• Touch panel controller (TPC) for main projector inte rface. Verify you have the latest software by 
visiting  http://www.christiedigital.com
• 1x 10/100BaseT Ethernet port
• RS232 ports for communication
• 4x Option slots...

   Introduction
D4K2560 User Manual19
020-101076-04 Rev. 1 (01-2015)
How the projector works
The D4K2560 accepts a variety of input signals for projection on front or rear projection screens, 
typical in commercial or other large screen applications. High-brightness light is generated by a 
short arc Xenon lamp, then modulated by three Digi tal Micromirror Device (DMD) panels responding 
to incoming data streams of digitized red, green and blue color information. As these digital 
streams flow from the...

D4K2560 User Manual20
020-101076-04 Rev. 1 (01-2015)
Installation and Setup
This section explains how to install, co nnect, and optimize the projector display.
Site requirements
To safely install and operate the projector, the inst allation location must have restricted access for 
authorized personal only and me et these minimum requirements.
Physical operating environment
• Maximum Ambient Temperature (operating) 35°C (95°F)
• Minimum Ambient Temperature (operating) 10°C (50°F)
External exhaust...