Christie Digital Systems Matrix Hd4 Users Manual

Section 6: Specifications  
6-2 020-100001-01 Rev. 01 (04/07)   
Contrast Ratio (ANSI, full field, min.) 
450:1 ANSI 
1500:1 full field for SXGA+, 1500-2000:1 full field for HD, 2000:1 full field for 
Matrix S+5K only 
 
Color Primaries (nominal) 
Without Yellow Notch Filter  With Yellow Notch Filter 
 X Y  X Y 
R 0.660 0.330 R 0.680 0.320 
G 0.310 0.640 G 0.265 0.690 
B 0.145 0.065 B 0.145 0.060 
Colors and Gray Scale 
Resolution   10 bits  
Displayable colors  1.1billion 
Color Temperature 
Default...

  Section 6: Specifications 
020-100001-01 Rev. 01 (04/07) 6-3. 
 
Standard Analog RGB or YPbPr (Interlaced or Progressive Scan Format) 
Horizontal Frequency Range  31 – 120 kHz 
Vertical Frequency Range (See Note 2)  23.97 – 150 Hz 
Scan format  Interlaced or progressive 
Pixel Clock Rate (max.)  220 MHz max  
Signal Format  Analog RGB, YPbPr, Composite (on 
“G/Y/CVBS” input and S-video 
(luma on “R/Pr/Y” input and chroma 
on “B/Pb/C” input) 
Input Levels   R, G, B, - with sync:  1.0V
p-p ±2 dB...

Section 6: Specifications  
6-4 020-100001-01 Rev. 01 (04/07)   
DVI-I Input 
Interface Standard  DDWG DVI 1.0 
Signal Types  - RGB (Analog or Digital 
      - YPbPr (Analog) 
     - YCbCr
A(Digital) 
Color Space  RGB or YPbPr 
Horizontal Frequency Range  31 – 120 kHz 
Vertical Frequency Range  23.97 – 150 Hz 
Pixel Clock Rate  25 – 165 MHz 
Scan Format  interlaced or progressive 
Active Pixels per scan line  640 min., 2048 max. 
Active Lines per field / non-interlaced frame  200 min., 1536 max...

  Section 6: Specifications 
020-100001-01 Rev. 01 (04/07) 6-5. 
 
 Voltage range  
 500W models 100 – 240VAC 
 1000W models
 100 – 240VAC 
 1200W models 200 – 240VAC 
Line frequency   50 Hz – 60 Hz nominal 
Max. Inrush current  60A max. 
Current rating  
 500W models  10A @ 100V 
 1000W models
 10.4A @ 100V 
 1200W models  10A @ 200V 
Power consumption  
 500W models  1000 W max. 
 1000W models
 1600 W max. 
 1200W models  2000 W max. 
Current rating or AC input connector   15A 
Type of Connector (back...

Section 6: Specifications  
6-6 020-100001-01 Rev. 01 (04/07)   
Operating position   Full rotation allowed about the lamp 
 axis,  ± 15 degrees minimum tilt of 
  lamp axis from horizontal 
Warm up to full brightness  10 minutes max. 
Dimensions (without lens)  26.0” x 22.3” x 12.3”  
(Including feet at min. height position) 660mm x 566mm x 313mm  
 
Weight  (without lens) 
 500W models  75 lb. Max 
 1000W models  75 lb. Max 
 1200W models  80 lb. Max 
UL 60950-1 1
st edition and CAN/CSA C22.2 No....

  Section 6: Specifications 
020-100001-01 Rev. 01 (04/07) 6-7. 
Lenses  
(SXGA+) (HD) 
0.73:1 fixed (38-809088-01)  0.67:1 fixed (104-110101-01) 
1.2:1 fixed 1m-3m (38-8098093-01)  1.1:1 fixed FP (104-111101-01) 
1.2:1 fixed 3m-15m (38-809095-01)  1.1:1 fixed RP (104-116101-01) 
1.45-1.8:1 zoom (38-809089-01)  1.38-1.84:1 zoom (104-112101-01) 
1.8-2.5:1 zoom (38-809090-01) 1.84-2.58:1 zoom (104-113101-01) 
2.5-4.5:1 zoom (38-809091-01) 2.58-4.15:1 zoom (104-114101-01) 
4.5-7.3:1 zoom (38-809092-01)...

Appendix A 
Glossary 
 
020-100001-01 Rev. 01 (04/07) A-1 
This appendix defines the specific terms used in this manual as they apply to this projector. Also included are other 
general terms commonly used in the projection industry. 
The time, inside one horizontal scan line, during which video is generated. 
The ability of a screen to reflect ambient light in a direction away from the “line of 
best viewing”. Curved screens usually have good ambient light rejection. Flat screens 
usually have less...

Appendix A: Glossary  
A-2 020-100001-01 Rev. 01 (04/07) 
adjustable display settings, etc. Use channels to switch between a variety of setups 
quickly, automatically recalling previously defined display parameters. 
A list/menu of previously defined channels available in projector memory. 
A number that uniquely identifies a specific channel retained in projector memory. 
The projector can retain up to 99 channels. 
A menu item that indicates whether an option is currently in effect (checked) or not...

 Appendix A: Glossary 
020-100001-01 Rev. 01 (04/07) A-3 
A type of rear-projection screen which spreads the light striking it. Screen gain is less 
than one but audience viewing angles are increased. 
An adjustment that affects the display of an image. Such display settings include 
contrast, brightness, tint, blanking, size, offsets, and others. 
The maximum frequency of the pixel clock. Also known as pixel clock rate. 
The Enhanced Extended Display Identification Data standard, established by VESA,...