Christie Digital Systems Matrix Hd2 Users Manual
Have a look at the manual Christie Digital Systems Matrix Hd2 Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 267 Christie Digital Systems manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Appendix G: Index F-2 020-100001-01 Rev. 01 (04/07) The RGB400 ALT Input Module may be installed in this projector, a Marquee Signal Switcher, or a Marquee Case/Power Supply. The module receives analog RGB input signals from computers or other RGB source devices. Video inputs are 75 Ω terminated. Video outputs provide buffered loop-through to another display device. RGB400ALT Features • Accepts 3, 4, or 5 wire RGB video (sync-on-green, composite sync, or separate horizontal and vertical sync) • Accepts YPbPr, composite (on green) and Y/C (on red/blue) • BNC connectors for RGB signal inputs • Buffered loop-through video outputs NOTE: The audio connectors are not functional. The PC250 Analog Input Module may be installed in this projector, a Marquee Signal Switcher or a Marquee Case/Power Supply. The module receives analog RGB input signals from IBM PC compatibles or Macintosh computers. Video inputs are 75 Ω terminated. Video outputs are provided for buffered loop-through to another display device. PC250 Analog Features • Accepts VGA or MAC RGB video • 15 pin D connectors for video • Active loop-through video outputs NOTES: 1) This interface does not accept VGA and MAC signals simultaneously. 2) The audio connectors are not functional. 3) Trademarks are the rights of their respective owners. This module can display digital video input signals conforming to the DVI (Digital Visual Interface) single-channel standard. RGB400 Active Loop-Thru f Input Module 38-804607- xx PC250 Analog f Input Module 38-804609- xx DVI Input Module f 38-804635-xx
Appendix G: Index 020-100001-01 Rev. 01 (04/07) F-3 Features • Supports Digital Visual Interface (DVI) single-channel • Supports VESA® Extended Display Identification Data (EDID™) • Provides an active-loop-through using a DVI connector (conforming to the DVI Specification) The module accepts a serial digital 4:2:2 component video signal (YCbCr) via a single SERIAL IN BNC connector. The signal can loop through the SERIAL OUT BNC out to another device (such as another projector). Inputs are 75 Ω terminated. SDI Features • Accepts serial digital 4:2:2 component video (YCbCr) • Provides both a SERIAL IN and a SERIAL OUT BNC connector; includes status LEDs for signal and error • SMPTE 259M compatible The Dual SD/HD-SDI Module enables incoming serial digital (SD or HD) data to be tiled across multiple screen displays, overlapped for extra-bright displays, or distributed to additional projectors for multiple, same-image screens. Dual SD/HD-SDI Features • Accepts and decodes up to two serial digital inputs • Outputs up to two 10-bit YCbCr 4:2:2 video signals • Provides input(s) to output(s) loop-through capability • Supplies interchangeable inputs as part of the Picture-in Picture display • SMPTE 259M and 372 compatible Serial Digital Input Module f 38-804602- xx Dual SD/HD-SDI Module f 38-804656-xx
Index 020-100001-01 Rev. 01 (04/07) G-1 3 3D Simulation, 3-34 3D Stereo Sync, 3-35 A Ambient Lighting, 2-5 Anamorphic, 3-22 Arrow Keys, 2-9 Auto Input Level, 3-29 Auto Key, 3-5 Auto Setup, 3-5 AutoSource Checkbox, 3-19 B Backlight, 3-42 Bad Sync, 3-70 Baud Rate, 2-17, 3-38 Blacklevels and Drives, 3-29 Blanking, 3-24 Brightness Key, 3-7 Brightness Uniformity Canceling, 3-64 Definition, 3-60 Prerequisites, 3-60 Procedure, 3-60 Submenu, 3-43 Broadcast Key, 3-41 Broadcasting, 3-9 Built-in Keypad, 3-1 C Cables Serial Communication, C-1 Ceiling Mount, 2-11 Channel Locked, 3-19 Name, 3-18 Number, 3-15, 3-19 Signal Type, 3-16 Channel Copy/Delete, 3-17 Channel Edit Menu, 3-18 Channel Key, 3-6, 3-15 Channel Selection, 3-15 Channel Setup Menu, 3-16 And Enter Key, 3-17 And Function Key, 3-17 Channels Creating Automatically, 3-15 Creating in Channel Setup Menu, 3-17, 3-18 Definition of, 3-14 Deleting in Channel Setup Menu, 3-17 Checkbox Toggles, 3-12 ChristieNET. See Communications:ChristieNET Clamp Tip, 3-30 Color Adjustment, 3-32, 3-43 Color Saturation Submenu, 3-45 XY Submenu, 3-44 Color Enable, 3-47 Color Matching, 3-57 Color Space Selecting, 3-26 Color Temperature, 3-33 Communications ASCII Messaging, 3-68 ChristieNET, 3-68 Ethernet, 3-68 Remote Control of Projector, 3-68 Submenu, 3-38 Component Video, 2-13 Composite Video Connection, 2-14 Configuration Menu, 3-36
Appendix G: Index F-2 020-100001-01 Rev. 01 (04/07) Contrast Key, 3-7, 3-25 Custom Sizing, 3-20 D Dark Interval, 3-34 Date and Time Setting, 3-37 Decoder AGC Enabling, 3-27 Decoder Luma Delay, 3-28 Detail Threshold, 3-36 Diagnostics and Calibration, Submenu, 3-46 Display Channel List, 3-37 Error Messages, 3-38 Slidebars, 3-38 DVI, 2-14 E Edge Blending, 3-43 Description, 3-64 How Blends are Used, 3-64 Main functions, 3-64 Procedure, 3-66 Enter Key, 3-9 Error Messages Bad Sync, 3-70 H-Sync or V-Sync, 3-70 No Signal, 3-70 System Warnings/Errors, 3-70 Ethernet Communications, 2-16 Troubleshooting, 5-3 Ethernet Network, 2-18 Ethernet Settings, 3-40 Exit Key, 3-9 F Fade Time, 3-37 Film Mode Threshold, 3-36 Filter, 4-4 Freeze Image, 3-47 Full Height, 3-21 Full Screen, 3-21 Full Width, 3-21 Function Key, 3-8 G Gamma, 3-25 Gamma Key, 3-7 Geometry and Color, Submenu, 3-42 Glossary of Terms, A-1 H Help Context-sensitive, 3-11 Horizontal Position, 3-23 I Image Brightness, 3-25 Contrast, 3-25 Detail, 3-26 Gamma, 3-25 Image Adjustments, 3-19 Image Blanking, 3-24 Image Resizing, 3-20 Image Size, 3-22, 3-23 In Menu Checkbox, 3-19 Input Definition of, 3-14 Selecting/switching, 3-14 Settings, Advanced, 3-32 Input 3-2, 3-14 Input Keys, 3-6 Input Levels, 3-29 Color Enable, 3-30 Input Panel, 3-2 Input Video Black, 3-28 Installation Considerations, 2-3, 2-5 Front Screen, 2-3 Lighting, 2-5 Screen Size, 2-4 Throw Distance, 2-5 Installation Type, 2-3 Interfaces,Optional, 2-14 Interpolated Color, 3-35 Invalid Channel, 3-69 IP Address, 3-40 Setting, 3-18 IR Sensors, 3-2 IR Sensors, 3-42 K Keypad, 2-15, B-1 Built-in, 3-3 Enabling Wire Remote, 3-42 Guidelines, 3-5 IR Remote, 3-3
Appendix G: Index 020-100001-01 Rev. 01 (04/07) G-3 Replacing Batteries, 4-5 Wired, 5 Keystone Correcting, 42 L Lamp, 3-2, 4-4 Failure to Ignite, 5-3 History, 3-55 Hours, 3-53 Hours of Use, 3-56 Intensity Setting, 3-54 Limit, 3-53 LiteLoc, 3-54 Manu, 3-53 Message, 3-53 Mode, 3-54 Optical Aperture, 3-55 Recording Serial Number, 3-56 Serial Number, 3-53 Troubleshooting, 5-3 Lamp Door, 3-2 Lamp Modes Max Brightness, 3-54 Power, 3-54 Lamp Replacement, 4-5 Language Choosing, 3-37 Laser Key, 3-10 LEDs, Status, 3-71 Lens Offset Adjustment, 2-6, 2-9 Replacement Procedure, 4-11 Lens Mount, 3-2 Level Value, 3-48 Line Cord, 2-2 Lite LOC Calibration, 3-49 LiteLOC Troubleshooting, 5-3 Locked Channel Checkbox, 3-19 Luma Delay, 3-28 M Menu Channel Edit, 3-18 Channel Setup, 3-16 Configuration, 3-36 Image Settings, 3-25 Lamp, 3-53 Main, 3-10 Size and Position, 3-20 Test Pattern, 3-42 Menu Font Size, 3-37 Menu Key, 3-7 Menu Location on Screen, 3-37 Menu Navigation, 3-10, 3-19 Motion Filter, 3-36 Multiple Projectors Description, 3-57 N Network Routing, 3-39 Network, Split. See Split Network No Resizing, 3-21 No Signal, 3-70 Noise Reduction, 3-26 Numerical Entry, 3-14 O Odd Pixel Adjustment, 3-47 Level Detector, 3-48 Offsets Horizontal, 2-6, 2-9 Vertical, 2-6, 2-9 Optical Aperture, 3-33 Optional Input, 2-14 Optional Input Modules, F-1 OSD Key, 3-8 P Peak Detector, 3-30, 3-48 PIP, 3-50 Border Color, 3-52 Border Width, 3-52 Enable, 3-51 Image Settings. See Image Settings Pixel Phase, 3-22 Pixel Tracking, 3-22 Plug & Display (EDID), 3-24 Port Number Changing, 2-18 Entering, 3-40 Power Connection, 2-20 Line Cord, 2-2 Setting for Lamp, 3-54 Power Key, 3-5 Powerup, Auto, 3-37 Primary Colors, Adjusting, 3-57 Projector Assigning/Changing Number, 3-38 Error Conditions, 3-69 Features, 1-1
Appendix G: Index F-4 020-100001-01 Rev. 01 (04/07) How it works, 1-2 Mounting, 2-11 Number, 3-14 Quick Setup, 2-1 Resetting, 3-70 Projector Height, 2-11, 3-1 Projector Key, 3-8 Pull-Down Lists, Use of, 3-12 R Remapping Keypad. See Working with PIP or Seamless Switching RGB Connection, 2-12 RS-232 Connection, 2-15 RS-422 Connection, 2-15 S Screen Size, 2-5 Seamless Switching. See Working with PIP or Seamless Switching Fade Time, 3-52 Image Optimization. See Working with PIP or Seamless Switching Shutter Key, 3-8 Slidebar Adjustment, 3-11 Slidebars Direct, 3-12, 3-19 Using, 3-12 Source Setup. See Channel Splash Screen Setup. See Menu:Splash Screen Setup Split Network, 3-39 Split Networks Options for Setup, 2-19 S-Video Connection, 2-14 Swap Main and PIP Image. See PIP Switcher, 3-19 Sync Def. and types, 6-3 System Integration GPIO Connector, 2-19, E-1 T Test Key, 3-5 Test Pattern Grey Level, 3-47 Text Editing, 3-13 Throw Distance, 2-5, D-1 Time-outs, 3-11 Troubleshooting Ethernet, 5-3 Lamp, 5-3 Power, 5-1 V Ventilation, 3-2, 4-3 Vertical Position, 3-23 Vertical Stretch, 3-22 Video Standards, 3-27 Y YPbPr, 3-26 Connection, 2-13