Celluon Projector Picoair User Manual

							User Manual 
						

							Table of Contents
1. Safety Precautions                                                         FCC Compliance Information                                                          FCC Class Notice                                                         FCC Caution                                                         FCC RF Radiation Exposure Statement                                                         Industry Canada Statement                                                         CE Caution                                                         IEC-60825-1 Caution 2. Certifications 3. Environmentally Friendly Disposal and Recycling4. Package Contents 5. Product Features6. Identifying Parts7. Connecting PicoAir                                                         a. Compatible Operating Systems                                                          b. How to Connect                                                         c. Switching Connection Mode8. Making Adjustments                                                         a. Volume Adjustment                                                         b. Speaker / Earphone Usage                                                         c. Laser Alignment9. Charging the PicoAir 10. Troubleshooting  11. Specifications12. Warranty
3 
						

							1. Safety Precautions
This product is not waterproof – avoid using it near water or wet places. There is a risk of malfunction if product is used in places where sudden or extreme temperature changes occur.Applying excessive force or impact to this product may result in product damage, and will void warranty.Never attempt to disassemble or service this product yourself. Doing so can result in electrical shock and void warranty.This is a Class 3R Laser product. For your safety, do not stare directly into the laser source. Doing so could damage your eyes. 
FCC Compliance InformationThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference to another device.2. This device must accept any interference received, including interference that may cause undesired operation.
FCC Class NoticeThis equipment has been tested and found to comply within the limits for a Class B digital device, pursuant to Part15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment.This equipment generates, uses, and radiates radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur with special installation.If this equipment does cause interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to correct theinterference by one of the following measures:\bd  Reorient or relocate the receiving antenna.\bd  Increase separation between the equipment and receiver.\bd  Connect the equipment to an outlet on a circuit different from which the receiver is connected.\bd  Consult the dealer or an experienced radio/TV technician.
FCC CautionAny changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
4 
						

							FCC RF Radiation Exposure Statement:This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum  distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Industry Canada StatementThis device complies with Industry Canada license- exempt RSS standard(s).Operation is subject to the following two conditions:(1) This device may not cause interference.(2) This device must accept any interference, including interference that may cause undesired operation of the device.
CE CautionRisk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
IEC-60825-1 CautionUse of control or adjustments or performances of procedures other than those specified here in may result in hazardous radiation exposure.
5 
						

							2. Certifications
KC : MSIP-CRM-CLK-PICOAIR   FCC ID : TCLPICOAIRCE1177
compliantRoHSIC No : 10211A-PICOAIRIEC-60825-1 : Class 3R Laser
IEC-60825-1 : Class 3R Laser
LASER APRETURE
LASER RADIATIONAVOID DIRECT EYE EXPOSURECLASS 3R LASER PRODUCTOutput: Red(90mW)/Blue(85mW)/Green(50mW)λ= Red(639nm)/Blue(445nm)/Green(522nm)Pulse frequency : 60HzIEC 60825-1:2007
3. Environmentally Friendly Disposal and Recycling
To protect the environment, dispose this product separately from household waste once it has  reached its end of life, or take it to your local electronic waste disposal center.
Built-in Battery
Use supplied USB power adapter to begin charging the battery.  Battery status is indicated by four blue LED indicators while charging. (4 LED : 100% / 3 LED : 75% / 2 LED : 50% / 1 LED : 25%)
3140 mAh @ 3.7VBattery CapacityApprox. 120 minutes (with continuous use)Battery Operating TimeRechargeable Lithium-ion Polymer BatteryBattery Type
Approx. 270 minutesBattery Charging Time
Charging the Battery
6 
						

							4. Package Contents
PicoAirUser ManualPowerAdapterHolding MountPouch
5. Product Features
PicoAir is a laser-based HD pico projector that always stay focused and easily fits in your pocket. It enables you to share contents from your mobile device onto any surface via Miracast or DLNA connection.
7 
						

							6. Identifying Parts
Touch-sensitive Volume Up 
Touch-sensitive Volume Down 
Backlit Battery Indicator LightSpeaker
3.5mm Audio OutMiracast or DLNA SwitchCHARGE – Micro USB port for chargingBattery Status Indicator
Power ButtonSelect Button
Reset Button
FCC ID : TCLPICOAIR    CE1177    KC : MSIP-CMM-CLK-PICOAIR IC : 10211A-PICOAIRModel : PicoAir     DC : 5V 2A     Celluon, Inc.     Made in Korea
LASER APRETURELASER RADIATIONAVOID DIRECT EYE EXPOSURECLASS 3R LASER PRODUCTOutput: Red(90mW)/Blue(85mW)/Green(50mW)λ= Red(639nm)/Blue(445nm)/Green(522nm)Pulse frequency : 60HzIEC 60825-1:2007
Laser radiates from this aperture
8 
						

							7. Connecting PicoAir
a. Compatible Operating Systems
MiracastDLNAFor Wireless Connection
Android OS 4.2 or later Windows OS 8.1 or higherAny OS that supports Screen Mirroring functionality
Any digital device that supports DLNA protocol* Using DLNA connection requires downloading DLNA    streaming app from the App Store or Play Store.
b. How to Connect 
Using Miracast : The Miracast capability is called different names on difference devices.  ( i.e. Samsung/Sony = Screen Mirroring, HTC = Media Output)Please find this in device settings. 
2. Celluon logo will display upon powering on, followed by a Preparing Wireless Connection… screen.3. After 20~30 seconds, Ready to Connect screen will display.
M/D
1. Turn on PicoAir by pressing power button for 2-3 seconds.
1
23
9 
						

							4. On a desired mobile device, find and select Screen Mirroring / Media Output. 
5. Mobile device will search for nearby devices to connect.
4
6. When device discovers “Celluon PicoAir”,  tap to connect.7. Mobile device will say “Connected” and PicoAir will start mirroring display.
* It is recommended to disconnect any previously connected WiFi network before attempting to connect via Miracast (screen mirroring).
67
10