Casio Xj-S30, Xj-s35 Data Projector Users Guide

21
Projection 
ModeRCVUN Single Use this sub-menu to specify whether projection will be 
from the front of the screen or the back of the screen. 
*:
Select this option when projecting from the front of the 
screen.
:
Select this option when projecting from the back of the 
screen.
:
Select this option to flip the back-projected image 
vertically.
:
Select this option to flip the image vertically.
Startup Screen RCVUN Single Use this sub-menu to specify whether or not a startup 
screen should be projected...

22
Blank Screen RCVUN Single Use this sub-menu to specify what should be projected 
after the [BLANK] key is pressed. 
Blue:
Select this option to project a blue screen. 
Black*:
Select this option to project a black screen. 
Logo:
Select this option to project the projector’s built-in logo 
screen. 
Restore Menu 
DefaultsRCVUN Source 
SpecificUse this sub-menu to return all of the sub-menu items on 
the Screen Settings main menu to their initial default 
settings. 
zRestoring menu defaults when there is...

23
Input Settings Main Menu
Setting NameInputSetting 
UnitDescription
RGB Input RCUVN Single Use this sub-menu to specify manually the type of signal 
being input from the projector’s RGB input terminal. 
Auto*:
Automatically detects the signal being input from the RGB 
input terminal and configures the appropriate input 
protocol. 
RGB:
Select this option when a computer is connected to the 
RGB input terminal. For details about connecting a 
computer, see “Connecting a Computer to the Projector” 
in...

24
Option Settings 1 Main Menu
Setting NameInputSetting 
UnitDescription
Menu Position RCVUN Single Use this sub-menu to specify the display position of the 
setup menu as either the center or the left side of the 
screen. 
*:
Select this option to display the setup menu in the center 
of the screen. 
:
Select this option to display the setup menu on the upper 
left corner of the screen.
Auto Keystone 
CorrectionRCVUN Single Use this sub-menu to turn auto keystone correction on or 
off. 
On*:
Select this...

25
Direct Power 
OnRCVUN Single Use this sub-menu to turn Direct Power On on or off. 
See “Direct Power On” in the “User’s Guide (Basic 
Operation)” for more information. 
On:
Select this option to turn on Direct Power On. 
Off*:
Select this option to turn off Direct Power On.
Important!While Direct Power On is enabled, the projector 
will turn off automatically if no key operation is 
performed and no signal input is received within 
about 10 minutes after it is turned on. This is true 
regardless of...

26
Option Settings 2 Main Menu
*1 When plug-and-play is turned on, the XJ-S35 projector will make that device the input 
source automatically. For details about plug-and-play, see “USB Function Guide” on the 
bundled CD-ROM.
USB Settings Main Menu Items (XJ-S35 Only)
The USB Settings main menu is available only when there is an external device connected 
to the USB port of the XJ-S35 model projector. For details, see “USB Function Guide” on 
the bundled CD-ROM.
Setting NameInputSetting 
UnitDescription...

27
Operational Info Main Menu
Setting NameInputSetting 
UnitDescription
Lamp Time RCVUN Single This sub-menu item shows the cumulative number of 
hours the current lamp has been used to date. Use this 
value as a reference when deciding whether or not the 
current lamp needs to be replaced. For details about 
replacing the lamp, see “Replacing the Lamp” in the 
“User’s Guide (Basic Operation)”.
Reset Lamp 
Time RCVUN Single Use this submenu item to reset the lamp time to 0 hours 
after replacing the...

28
Restore All Defaults Main Menu
Setting NameInputSetting 
UnitDescription
Restore All 
DefaultsRCVUN Single This sub-menu returns all sub-menu items on all main 
menus to their initial default settings. This operation can 
be performed regardless of the currently selected input 
source and regardless of whether or not a signal is 
currently being input. For details about this procedure, see 
“To restore all settings on the setup menu to their initial 
factory defaults” on page 17. 
Unit Operating...

29
Appendix
When performing an operation on the remote controller, point it at the remote control signal 
receiver on the back or front of the projector. The following illustration shows the range of 
the remote controller signal.
Remote Controller Range
The allowable distance between the remote controller and the projector is less when there 
is a sharp angle between the remote controller and the remote control signal receiver.
Important!
To avoid running down the battery, store the remote control unit...

30
The following table shows the relationship between the distance and projected image size.
Important!
Note that the distances provided above are for reference only.
Projection Distance and Screen Size
Projection SizeApproximate Projection Distance
Screen SizeDiagonal 
(cm)Minimum 
Distance (m)Maximum 
Distance (m)Minimum 
Distance 
(feet)Maximum 
Distance 
(feet)
40 102 1.1 2.2 3.61 7.22
60 152 1.7 3.4 5.58 11.15
80 203 2.3 4.5 7.55 14.76
100 254 2.8 5.6 9.19 18.37
150 381 4.3 8.5 14.11 27.89
200 508...