Casio Xj-S30, Xj-s35 Data Projector Users Guide

DATA PROJECTOR
XJ-S30/XJ-S35
User’s Guide
zBe sure to read the precautions in the 
separate User’s Guide (Basic Operation). For 
details about setting up the projector and lamp 
replacement, see the User’s Guide (Basic 
Operation).
zBe sure to keep all user documentation handy 
for future reference.
E 

2
 DLP is a registered trademark of Texas Instruments of the United States.
 Microsoft, Windows, Windows NT, Windows XP, and the Windows logo are registered 
trademarks or trademarks of Microsoft Corporation in the United States and other 
countries.
 Other company and product names may be registered product names or trademarks of 
their respective owners.
 The contents of this User’s Guide are subject to change without notice. 
 Copying of this manual, either in part or its entirety is forbidden....

3
Contents
Contents........................................................................... 3
About this manual... .......................................................................................... 4
XJ-S35 Users ............................................................................................................... 4
Operation During Projection .......................................... 5
Image Operations During Projection...

4
Appendix ........................................................................ 29
Remote Controller Signal Range .................................................................... 29
Projection Distance and Screen Size .............................................................. 30
Connecting to a Component Video Output Device ......................................... 31
Full-screen Display of an RGB Image ........................................................................ 32
Reattaching...

5
Operation During Projection
This section explains the various types of operations you can perform while the projector is 
projecting an image. 
You can perform the following operations while projecting an image.
zImage brightness adjustment
zColor mode selection 
zImage zooming 
zMomentary cut off of the input source image and projection of a black or blue screen, or 
a logo
zImage freeze
zPointer display in the projected image
zAspect ratio switching (between 4:3 and 16:9)
Adjusting Image Brightness...

6
Selecting the Color Mode
You can select from among five different color mode settings to optimize the projected 
image in accordance with image contents and projection conditions.
Note
(for XJ-S35 model users)
Use the setup menu (page 11) to select the color mode when you have an external 
device connected to the projector’s USB port.
To change the color mode
1Press the [COLOR MODE] key.
zThis displays the color mode selection window. The currently selected color mode is the 
one whose button is...

7
Momentarily Cutting Off the Input Source Image
1Press the [BLANK] key.
zThis temporarily cuts off the image from the input source and projects a black screen in 
its place.
2To resume projection of the image from the input source, press the [BLANK] key 
(or [ESC] key).
Note
You can specify projection of a black screen or blue screen, or a logo. For details, see 
“Blank Screen” under “Screen Settings Main Menu” on page 22.
Freezing an Image
Pressing the [FREEZE] key freezes the projected image.
To...

8
Displaying a Pointer in the Projected Image
You can select from among eight different pointer styles, including various arrow styles, for 
display in the projected image. Pointers can be used during a presentation to indicate or 
highlight a specific part of the image.
Note
Depending on the pointer style you are using, the pointer may not display properly 
when you are using keystone correction. If this happens, use the [KEYSTONE +] and 
[KEYSTONE –] keys to change the keystone correction value to...

9
Press the [ASPECT] key to toggle the aspect ratio of the displayed image between 4:3 
and 16:9.
Note
zThe aspect ratio setting affects the projected image only when the input source is 
VIDEO or component. 
zWhen the input source is a component signal with an aspect ratio of 16:9, the 
aspect ratio switches automatically to 16:9. When this happens, pressing the 
[ASPECT] key will not change the aspect ratio. 
zYou also can change the aspect ratio setting using the setup menu. For details, see 
“Aspect...

10
Pressing the [FUNC] key displays the menu shown below.
You can use this menu to perform the operations described below. 
zAdjust image brightness
Highlight “Brightness” and then press the [ENTER] key.
 This performs the same operation as pressing the [BRIGHT] key (  key) described on 
page 5.
zTurn the Eco Mode on or off
Highlight “Eco Mode” and then press the [ENTER] key.
 This performs the same operation as pressing the [ECO] key (
U key) described on 
page 9.
zSelect the aspect ratio of the...