Casio Xj 360 Dlp Users Guide

							21
Using the Setup Menu
7.Use the currently selected sub-menu to change settings or select 
options.
zThe operations you need to perform depend on the sub-menu item type. For information 
about item types, see “Setup Menu Overview” on page 16.
zFor information about operations required for each item type, see “Sub-menu Operations” 
on page 22.
zAfter configuring all of the settings you want for a particular sub-menu, you can use the 
[S] and [T] keys to select another sub-menu and then configure its settings.
zTo select a different main menu, move the cursor to “Back” and then press the 
[ENTER] key, or press the [ESC] key. Next, perform steps 4 through 7 again.
8.To close the setup menu, move the cursor to “Close”, and then press 
the [ENTER] key.
zPressing the [MENU] key while the setup menu is displayed closes the setup menu, 
regardless of the menu level that is currently displayed.
Downloaded From projector-manual.com Casio Manuals 
						

							Using the Setup Menu
22
Sub-menu Operations
This section explains steps you need to perform in order to configure settings for each sub-
menu item type (value, selection, setting screen, execution, information).
Value Setting Type Sub-menu Item
This type of sub-menu item consists of a value and a bar graph.
Examples: Image Adjustment J Brightness; Screen Settings J Keystone Correction
Operation: Press the [W] key to make the value smaller, or the [X] key to make it larger. 
A value can be selected within the range that the indicator is able to move 
within the selected bar. Depending on conditions, the indicator may not move 
all the way to either end of the bar.
Selection Type Sub-menu Item
This type of sub-menu item provides a number of options from which you can choose.
Examples: Screen Settings J Aspect Ratio; Detailed Settings J Advanced Settings 1 J 
Auto Keystone Correction
Operation: The currently selected option is indicated by a black button next to it. Use the 
[W] and [X] keys to move between the selections, which causes the buttons 
next to them to become either black (selected) or white (deselected).
zFor details about the options that are available for each selection type sub-menu item, 
see “Setup Menu Reference” on page 27.
Downloaded From projector-manual.com Casio Manuals 
						

							23
Using the Setup Menu
Setting Screen Type Sub-menu Item
This type of sub-menu item displays a separate screen that you use to configure its settings.Examples: Image Adjustment J Color Mode; Detailed Settings J Advanced Settings 2 J 
Language, etc.
Operation: The following example shows how to configure settings for Image Adjustment J 
Color Mode.
1.Perform steps 2 through 4 under “Basic Setup Menu Operations” on 
page 19. Select the “Image Adjustment” main menu, and then select 
the “Color Mode” sub-menu item.
2.Press the [X] key (or the [ENTER] key).
zThis displays the Color Mode selection screen shown below.
3.Use the [S] and [T] keys to highlight the item you want to select, and 
then press the [ENTER] key.
4.After you are finished configuring settings, move the cursor to “Back” 
and then press the [ENTER] key, or press the [ESC] key to return to 
the previous sub-menu.
zAfter you are finished, press the [MENU] key to exit the setup menu.
zNote that the available settings and configuration procedures depend on the setting 
screen. See “Setup Menu Reference” on page 27 for details about each sub-menu item.
Downloaded From projector-manual.com Casio Manuals 
						

							Using the Setup Menu
24
Execution Type Sub-menu Item
This type of sub-menu item returns a setting to its initial default value.
Examples: Image Adjustment J Restore Menu Defaults; Operational Info J Reset Lamp 
Time
)Initializing Settings (page 25)
)Resetting the Lamp Time (User’s Guide (Basic Operation))
Information Type Sub-menu Item
This type of sub-menu item provides status and setup information.
Examples: Operational Info J Lamp Time; Operational Info J Input Signal
Refer to the following for details about the type of information that is available using the 
information type sub-menu items.
)Operational Info J Lamp Time (page 46) 
)Operational Info J Input Signal (page 46)
)Operational Info J Signal Name (page 47)
)Operational Info J Resolution (page 47)
)Operational Info J Horizontal Frequency (page 47)
)Operational Info J Vertical Frequency (page 47)
)Operational Info J Scan System (page 47)
Downloaded From projector-manual.com Casio Manuals 
						

							25
Using the Setup Menu
Initializing Settings
The setup menu lets you initialize the settings of a particular main menu item, or for all 
setup menu items.
To initialize the settings of a particular main menu item
Example: To initialize the settings of the “Image Adjustment” main menu item.
zPerforming the following procedure returns all of the sub-menu items under the currently 
selected main menu item to their initial default settings.
1.Select the input source whose settings you want to initialize.
2.Perform steps 2 through 4 under “Basic Setup Menu Operations” on 
page 19. Select the “Image Adjustment” main menu, and then select 
the “Restore Menu Defaults” sub-menu item.
3.Press the [ENTER] key.
zThis displays a confirmation message asking if you want to initialize settings.
4.Use the [S] and [T] keys to select [Yes].
5.Press the [ENTER] key to initialize the menu’s settings, or the [ESC] 
key to exit the initialize operation without doing anything.
zPressing the [ENTER] key returns all of the sub-menu items on the currently selected 
main menu to their initial default settings.
Downloaded From projector-manual.com Casio Manuals 
						

							Using the Setup Menu
26
To initialize all menu settings
zPerforming the procedure below will initialize all settings, except for the following setup 
menu sub-menu items.
zPower on password on/off setting and the current password (Detailed Settings  J Power  
On Password)
z Language Setting (Detailed Settings  J Advanced Settings 2  J Language) 
z Lamp Time (Operational Info  J Lamp Time)
1.Perform steps 1 through 4 under “Basic Setup Menu Operations” on 
page 19. Select the “Operational Info” main menu, and then select the 
“Restore All Defaults” sub-menu item.
2.Press the [ENTER] key.
z This displays a confirmation message asking if you want to initialize all settings.
3.Use the [ S] and [ T] keys to select [Yes].
4.Press the [ENTER] key to initialize all menu settings, or the [ESC] key 
to exit the initialize operation without doing anything.
z Pressing the [ENTER] key will initialize all settings and information, except for the items 
described under “Important!” above.
Downloaded From projector-manual.com Casio Manuals 
						

							27
Using the Setup Menu
This section provides detailed explanations about the contents for all of the setup menu items.
zThe titles in this section use the format: Main Menu Item 
J Sub-menu Item.
Image Adjustment

Image Adjustment 
J Brightness
This sub-menu adjusts the brightness of the projected image. A larger value produces a 
brighter image.
zThis setting is not possible when there is no input signal.
zA different setting can be configured and is stored for each input source.

Image Adjustment 
J Contrast
This sub-menu adjusts the contrast of the projected image. A larger value produces a 
stronger contrast.
zThis setting is not possible when there is no input signal.
zA different setting can be configured and is stored for each input source.

Image Adjustment 
J Sharpness
This sub-menu adjusts the sharpness of the projected image. A larger value makes the image 
sharper, while a smaller value makes it softer.
zThis setting is not possible when there is no input signal.
zA different setting can be configured and is stored for each input source.

Image Adjustment 
J Saturation
This sub-menu adjusts the color saturation of the projected image. A larger value increase 
color saturation.
zThis setting is not possible when the input source is RGB/Component and when there is 
no input signal.
zA different setting can be configured and is stored for each input source.

Image Adjustment 
J Tint
This sub-menu adjusts the tint of the projected image. A larger value makes the overall 
image more reddish, while a smaller value makes the overall image more bluish.
zThis setting is not possible when the input source is RGB/Component and when there is 
no input signal.
zA different setting can be configured and is stored for each input source.
Setup Menu Reference
Downloaded From projector-manual.com Casio Manuals 
						

							Using the Setup Menu
28

Image Adjustment 
J Color Mode
This sub-menu lets you select from among five different color settings to optimize projection in 
accordance with image contents and projection conditions.
Input Source Specific Menu Items
Setting Explanations
Presentation: Select this setting for standard presentations in a well-lit area.
Standard: Select this setting when you want to highlight the colors during your 
presentation.
Graphics: Select this setting when you want photographs and graphics to appear 
natural.
Theater: Select this setting to bring out the dark portions of your images.
Blackboard: Select this setting for easy viewing when projecting onto a blackboard.
Setting Storage
A different setting is stored for each input source.

Image Adjustment 
J Color Balance
This sub-menu lets you independently adjust the red, green, and blue components of the 
projection image.
zColor balance cannot be adjusted when there is no signal.
zA different setting can be configured and is stored for each input source.Input Source Available Items (Parentheses indicate defaults.)
RGB (Presentation), Standard, Graphics, Theater, Blackboard
Component Presentation, (Standard), Graphics, Theater, Blackboard
S-VIDEO
VIDEO
No Signal None
Downloaded From projector-manual.com Casio Manuals 
						

							29
Using the Setup Menu
To adjust color balance
1.On the “Image Adjustment” main menu, select the “Color Balance” sub-
menu item, and then press the [ENTER] key.
zThis causes the “Color Balance” sub-menu to appear, which shows the current settings 
for each of the color components.
2.Press the [ENTER] key. 
zThis displays the color balance setting screen.
3.Use the [S] and [T] keys to select the color you want to adjust (red, 
green, blue), and then use the [W] and [X] keys to adjust it.
4.After you are finished configuring settings, move the cursor to “Back” 
and then press the [ENTER] key, or press the [ESC] key to return to 
the previous sub-menu.
z To exit the setup menu, press the [MENU] key.

Image Adjustment 
J Restore Menu Defaults
This sub-menu returns all of the sub-menu items on the Image Adjustment main menu to 
their initial default settings.
zFor details about the initialization procedure, see “To initialize the settings of a particular 
main menu item” on page 25.
Downloaded From projector-manual.com Casio Manuals 
						

							Using the Setup Menu
30
Signal Settings

Signal Settings 
J Vertical Position
This sub-menu lets you adjust the vertical position of the input source image within the 
projection area.
zThis setting is possible only when RGB/Component is selected as the input source.
z“Image Adjustment” main menu item settings are saved for the current signal type only 
(XGA/60Hz, SXGA/60Hz, etc.), and not for the input signal source. Note, however, that the 
number of signal type settings that can be saved is limited. Exceeding the limit causes 
the oldest setting to be deleted automatically.

Signal Settings 
J Horizontal Position
This sub-menu lets you adjust the horizontal position of the input source image within the 
projection area.
zThis setting is possible only when RGB/Component is selected as the input source.
zSee “Signal Settings J Vertical Position” for details about how settings are saved.

Signal Settings 
J Frequency
This sub-menu lets you manually control the frequency of the image.
Normally, the projector is able to adjust the frequency automatically. If there are vertical bands 
in the projected image, however, it means that automatic adjustment is not possible for some 
reason. When this happens use this setting to adjust the image frequency.
zThis setting is possible only when RGB is selected as the input source. 
zSettings are saved for each signal type (XGA/60Hz, SXGA/60Hz, etc.). Note, however, that 
the number of signal type settings that can be saved is limited. Exceeding the limit 
causes the oldest setting to be deleted automatically.
zIf, for some reason, your manual frequency settings cause the image input from the 
computer to disappear from the projection, you can press the [AUTO] key to perform an 
auto adjust operation (page 7), which should cause the image to reappear.

Signal Settings 
J Phase
This sub-menu lets you manually control the phase of the image.
Normally, the projector is able to adjust the phase automatically. If there are color errors or 
flickering in the projected image, however, it means that automatic adjustment is not possible 
for some reason. When this happens use this setting to adjust the image phase.
zThis setting is possible only when RGB is selected as the input source.
zSee “Signal Settings J Frequency” for details about how settings are saved.
Downloaded From projector-manual.com Casio Manuals