Casio Xj 360 Dlp Users Guide

							DATA PROJECTOR 
XJ-360
User’s Guide
•Make sure you read all of the precautions in the 
printed “User’s Guide (Basic Operations)” first. 
Also see the “User’s Guide (Basic Operations)” 
for information about setting up the projector and 
replacing its lamp.
•Keep this manual in a safe place for future 
reference.
E
Downloaded From projector-manual.com Casio Manuals 
						

							 Digital Light ProcessingTM, DLPTM, Digital Micromirror DeviceTM, and DMDTM 
are trademarks of Texas Instruments Incorporated of the United States.
 Microsoft, Windows, Windows NT, Windows XP, and the Windows logo are 
registered trademarks or trademarks of Microsoft Corporation of the United 
States in the United States and other countries.
 Apple and Macintosh are registered trademarks of Apple Computer, Inc. of 
the United States.
 Other company and product names may be registered trademarks or 
trademarks of their respective owners.
 The contents of this User’s Guide are subject to change without notice.
 Copying of this manual, either in part or its entirety, is forbidden. You are 
allowed to use this manual for your own personal use. Any other use is 
forbidden without the permission of CASIO COMPUTER CO., LTD.
 CASIO COMPUTER CO., LTD. shall not be held liable for any lost profits or 
claims from third parties arising out of the use of this product or this manual.
 CASIO COMPUTER CO., LTD. shall not be held liable for any loss or lost 
profits due to loss of data caused by malfunction or maintenance of this 
product, or any other reason.
 The sample screens shown in this manual are for illustrative purposes only, 
and appear differently from the screens actually produced by the product.
Downloaded From projector-manual.com Casio Manuals 
						

							Contents
3
Projection Operations .................................................................... 4
Projecting onto a Screen ................................................................................... 4
Keystone Correction (KEYSTONE)................................................................... 8
Using Color Mode (COLOR MODE) ............................................................... 11
Adjusting the Volume Level (VOL +/–) ............................................................ 12
Muting the Image and Audio (MUTE).............................................................. 12
Enlarging the Projected Image (D-ZOOM +/–) ................................................ 13
Freezing the Projected Image (FREEZE) ....................................................... 14
Displaying the Pointer ..................................................................................... 14
Using the Setup Menu .................................................................. 16
Setup Menu Overview ..................................................................................... 16
Setup Menu Screen Operations ...................................................................... 19
Setup Menu Reference ................................................................................... 27
Image Adjustment ...................................................................................................... 27
Signal Settings ........................................................................................................... 30
Screen Settings .......................................................................................................... 31
Detailed Settings ........................................................................................................ 35
Operational Info ......................................................................................................... 46
Appendix........................................................................................ 48
Remote Controller Signal Range .................................................................... 48
Projection Distance and Screen Size .............................................................. 49
Connecting to a Component Video Output Device ......................................... 50
Full-screen Display of an RGB Image ............................................................. 51
Password Feature ........................................................................................... 52
Cleaning the Projector..................................................................................... 53
Reattaching the Lens Cover............................................................................ 54
Projector Troubleshooting ............................................................................... 56
Supported Signals ........................................................................................... 58
Downloaded From projector-manual.com Casio Manuals 
						

							Projection Operations
4
Projection Operatio ns
This section explains the basic steps for projecting an image.
Basic Flow
Projecting onto a Screen
Preparing the Projector Starting
Projection
Set up the projector and point it at the screen. 

 User’s Guide (Basic Operations): Setting Up the Projector
Connect the computer or video device to the projector.

 User’s Guide (Basic Operations): Connecting a Computer to the Projector

 User’s Guide (Basic Operations): Connecting to a Standard Video Device
Turn on the projector and the connected computer or video device.
Press the [     
 ] (power) key to turn on the projector. 

 User’s Guide (Basic Operations): Turning On the Projector
Perform fine adjustment of the projection position and angle. 

 User’s Guide (Basic Operations): Adjusting the Projector Elevation Angle
Select the input source.

 “Manually Selecting the Input Source” (page 6)
Adjust the projected image size and focus the image. 

 “Zoom and Focus” (page 7)
Start projection (presentation, video, etc.).
  Perform the required operation on the input source computer or video equipment.
  Use the projector’s various functions to adjust the projected image as required.
Downloaded From projector-manual.com Casio Manuals 
						

							5
Projection Operations
Auto Input Source Selection 
When you turn on the projector, it checks the status of each input source (whether or not 
the input source is sending a signal) in the sequence shown below. It automatically selects 
the first input source it finds that is sending an input signal, and projects the applicable 
image.
If the RGB input terminal is connected to a computer and the S-VIDEO input terminal is 
connected to a video deck and signals are being supplied by both, for example, the projector 
automatically selects RGB input when it is turned on. The currently selected input source 
name is shown in the upper right corner of the projection screen.
zIf the projector does not find any input signal, the message “No signal input” appears in 
place of the input source name.
zThe input source that corresponds to input to the RGB input terminal is displayed in 
accordance with the “Detailed Settings J Advanced Settings 2 J RGB Input” (page 44) 
as shown below.
When the setting is “Auto”:“RGB” is displayed when the input signal to the RGB 
input terminal is RGB, “Component” is displayed in 
the case of a component signal. 
When the setting is “RGB”:“RGB” is displayed. 
When the setting is “Component”:“Component” is displayed.
z
Note that the projector does not select the input source automatically when “Off” is 
selected for the “Detailed Settings J Advanced Settings 1 J Auto Input Detect” (page 40) 
on the setup menu.
RGB terminal inputVIDEO terminal inputS-VIDEO terminal input
(RGB/Component)
(VIDEO)(S-VIDEO)
Downloaded From projector-manual.com Casio Manuals 
						

							Projection Operations
6
Manually Selecting the Input Source
The procedure you should use to select the input source depends on whether you are using 
projector keys or remote controller keys.
zTo select the input source using projector keys, press the [INPUT] key on the projector to 
cycle through input sources in the sequence shown below.
zTo select the input source using remote controller keys, press the [RGB/COMPONENT], 
[VIDEO], or [S-VIDEO] key on the remote controller to select the input source you want.
The currently selected input source name is shown in the upper right corner of the projection 
screen.
zIf the currently selected input source is not sending an input signal, the message “No 
signal input” appears in place of the input source name.
zThe input source name when RGB/Component is selected as the input source is 
displayed as “RGB” or “Component” in accordance with the “Detailed Settings J 
Advanced Settings 2 J RGB Input” on the setup menu (page 44). For more information, 
see the note under “Auto Input Source Selection” (page 5). 
[Projector]
[Remote Controller][INPUT] key
[S-VIDEO] key
[VIDEO] key
[RGB/COMPONENT] key
(RGB/Component)(VIDEO)(S-VIDEO)
Downloaded From projector-manual.com Casio Manuals 
						

							7
Projection Operations
Zoom and Focus
Use the zoom ring to adjust the image size, and the focus ring to focus the image.
zIt is best to have a still image on the screen when you focus the image.
zPerforming zoom after focusing can cause the image to go out of focus. If this happens, 
focus again.
Auto Adjustment of an RGB Image
When the input source is RGB (computer), the projector automatically adjusts vertical and 
horizontal positioning, frequency, and phase whenever it detects an RGB signal (following input 
source selection, power up, etc.). You can also execute an automatic adjustment operation by 
pressing the [AUTO] key. 
zYou can turn off auto adjustment (page 41) when you want to disable auto adjustment 
and maintain manual settings.
zThe projected image may become distorted while an auto adjustment operation is in 
progress.
zIf an image is unclear following the auto adjustment operation, you can use the menu to 
adjust items manually. For details, see “Signal Settings” on page 30.
Smaller
Larger
Zoom ring
Focus r ing
Downloaded From projector-manual.com Casio Manuals 
						

							Projection Operations
8
When the projector is at an angle to the screen it is projecting on, the projected image may 
have different length top and bottom edges. This phenomenon is called, “keystoning”. This 
projector comes with functions for automatic as well as manual keystone correction, which 
provides a regularly shaped projected image. The following shows the allowable angle that the 
projector can be positioned relative to the screen.
zThe angles shown in the above illustration are subject to the following conditions. 
zProjection of an image from a computer (Resolution: 1024 ×
 768; Vertical Frequency: 
60Hz) 
zResize Image To Fit: On 
zActual correction ranges are affected by the type of signal being projected, zoom, the 
“Resize Image To Fit” setting, the aspect ratio setting, and other factors.
zKeystone correction can cause the corrected image to be smaller than the original 
(uncorrected) image, or it can cause distortion of the image. If the projected image 
becomes difficult to view, try moving the screen and/or projector so they are oriented 
close to the configuration shown under “Setting Up the Projector” in the “User’s Guide 
(Basic Operations)”.
zThe projector does not support horizontal keystone correction. The center of the 
projector’s lens should be aligned with the horizontal center of the screen (see “Setting 
Up the Projector” in the “User’s Guide (Basic Operations)”).
Keystone Correction (KEYSTONE)
Screen
Up to about 20 
degreesUp to about 20 
degrees
Downloaded From projector-manual.com Casio Manuals 
						

							9
Projection Operations
Automatic Keystone Correction 
Automatic keystone correction correct the image to counteract the effects of vertical keystoning.
Performing auto keystone correction causes the message “Auto Keystone Corrected.” to appear 
in the bottom center of the projected image.
zAuto keystone correction is performed by detecting the elevation angle of the projector. 
This means that the surface you are projecting onto needs to be standing straight up. If 
the surface you are projecting onto is not straight, use manual keystone correction to 
correct the image.
zYou can turn auto keystone correction on or off as required. For details, see “Detailed 
Settings J Advanced Settings 1 J Auto Keystone Correction” on page 40.
Downloaded From projector-manual.com Casio Manuals 
						

							Projection Operations
10
Manual Keystone Correction
Manual keystone correction can be used to correct for vertical keystoning.
To use manual keystone correction
1.Press the [KEYSTONE] key.
zThis causes the keystone correction screen to appear on the projected image.
2.Use the [W] and [X] keys to correct for keystoning.
zEach press of [W] or [X] shifts the indicator on the currently selected bar left or right.
zKeystone correction is possible within the range that the indicator is able to move within 
the selected bar. Depending on conditions, the indicator may not move all the way to 
either end of the bar.
3.To close the setup screen, move the cursor to “Close”, and then press 
the [ENTER] key.
zYou can also close the setup screen by pressing the [ESC] or [KEYSTONE] key.
Downloaded From projector-manual.com Casio Manuals