Casio Xj-360 Data Projector Users Guide

41
Using the Setup Menu

Detailed Settings 
J Advanced Settings 1 
J Auto Adjust
This sub-menu lets you specify whether or not auto adjustment should be performed (page 7) 
when RGB is selected as the input source.
Input Source Specific Menu Items
Setting Explanations
On:Turns on auto adjustment, which is performed when RGB is selected as the input 
source.
Off: Turns off auto adjustment.
Setting Storage
This setting is saved for the RGB input terminal only.

Detailed Settings 
J Advanced Settings 1 
J...

Using the Setup Menu
42

Detailed Settings 
J Advanced Settings 1 
J Startup Screen
Use this sub-menu to specify whether or not a startup screen should be projected whenever 
the projector is turned on.
Input Source Specific Menu Items
Setting Explanations
On: Projects a startup screen. 
Off: No startup screen is projected.
Setting Storage 
A single setting is stored, which is applied to all input sources.

Detailed Settings 
J Advanced Settings 1 
J No Signal Screen
This sub-menu lets you specify what...

43
Using the Setup Menu

Detailed Settings 
J Advanced Settings 2 
J Auto Power Off
This sub-menu lets you turn Auto Power Off (see “Turning Off the Projector” in the separate 
“User’s Guide (Basic Operations)”) on or off.
Input Source Specific Menu Items
Setting Explanations
On: Turns on Auto Power Off.
Off: Turns off Auto Power Off.
Setting Storage
A single setting is stored, which is applied to all input sources.Input Source  Available Items (Parentheses indicate defaults.)
RGB (On), Off
Component...

Using the Setup Menu
44

Detailed Settings 
J Advanced Settings 2 
J RGB Input
This sub-menu lets you specify the type of input signal in accordance with the device 
connected to the projector’s RGB terminal.
Input Source Specific Menu Items
Setting Explanations
Auto: Select this setting for automatic switching between RGB and component in 
accordance with the signal input to the RGB input terminal.
RGB: Select this setting when a computer is connected to the projector’s RGB 
input terminal. For details...

45
Using the Setup Menu

Detailed Settings 
J Advanced Settings 2 
J Video Signal, S-Video Signal
This sub-menu specifies the input signal for the projector’s VIDEO and S-VIDEO input 
terminals.
Input Source Specific Menu Items
Setting Explanations
Auto: Select this setting to have the projector switch the video signal system 
automatically in accordance with the input signal from the video device 
that is connected to the VIDEO or S-VIDEO input terminal. This is the 
setting you should normally use....

Using the Setup Menu
46

Detailed Settings 
J Advanced Settings 2 
J Language
This sub-menu lets you specify the language to use for messages, setup menus, etc.
Input Source Specific Menu Items 
Setting Storage
A single setting is stored, which is applied to all input sources.
zThis setting is required the first time you turn on the projector. For more information, see 
“Turning On the Projector” in the separate “User’s Guide (Basic Operations)”.

Detailed Settings 
J Restore Menu Defaults
This sub-menu...

47
Using the Setup Menu

Operational Info 
J Signal Name
This sub-menu item shows the signal name of the signal input to the projector. The “Signal 
Name” column of the table under “Supported Signals” on page 58 shows the signal names 
that are displayed by this sub-menu item.

Operational Info 
J Resolution
This sub-menu item appears only when RGB is the input signal, and shows the resolution of 
the RGB input signal in terms of vertical and horizontal pixels.

Operational Info 
J Horizontal Frequency...

Appendix
48
App endix
When performing an operation on the remote controller, point it at the remote control signal 
port on the back or front of the projector. The following illustration shows the range of the 
remote controller signal. 
Remote Controller Signal Range
±
40 degrees 
max.
9 meters
(29.53 feet) 
max.
±
20
degrees max.
9 meters (29.53 feet) 
max.
9 meters
(29.53 feet)
max.±
40
degrees max.
9 meters(29.53 feet)max.±
20
degrees max.
FrontBack 

49
Appendix
zThe allowable projection range is from 0.8 meter (2.62 feet) to 16.1 meters (52.82 feet), 
which is the distance from the surface of the lens to the screen.
The following table shows the relationship between the distance and projected image size.
zNote that the distances provided above are for reference only.
Projection Distance and Screen Size
Projection Size Approximate Projection Distance
Screen Size Diagonal (cm) Minimum 
Distance (m) Maximum 
Distance (m) Minimum 
Distance 
(feet)...

Appendix
50
Some video devices are equipped with a component video output terminal. You can use an 
optionally available component video cable (YK-3) to connect the RGB input terminal of the 
projector to the component video output terminal of a video device.
zAlways turn off the projector and the video device before connecting them.
zComponent video output terminals come in 3-terminal sets: Y·Cb·Cr or Y·Pb·Pr. Be sure to 
match the colors of the plugs on the optional YK-3 component video cable with the...