Casio Xj-360 Data Projector Users Guide

21
Using the Setup Menu
7.Use the currently selected sub-menu to change settings or select 
options.
zThe operations you need to perform depend on the sub-menu item type. For information 
about item types, see “Setup Menu Overview” on page 16.
zFor information about operations required for each item type, see “Sub-menu Operations” 
on page 22.
zAfter configuring all of the settings you want for a particular sub-menu, you can use the 
[S] and [T] keys to select another sub-menu and then configure its...

Using the Setup Menu
22
Sub-menu Operations
This section explains steps you need to perform in order to configure settings for each sub-
menu item type (value, selection, setting screen, execution, information).
Value Setting Type Sub-menu Item
This type of sub-menu item consists of a value and a bar graph.
Examples: Image Adjustment J Brightness; Screen Settings J Keystone Correction
Operation: Press the [W] key to make the value smaller, or the [X] key to make it larger. 
A value can be selected within...

23
Using the Setup Menu
Setting Screen Type Sub-menu Item
This type of sub-menu item displays a separate screen that you use to configure its settings.Examples: Image Adjustment J Color Mode; Detailed Settings J Advanced Settings 2 J 
Language, etc.
Operation: The following example shows how to configure settings for Image Adjustment J 
Color Mode.
1.Perform steps 2 through 4 under “Basic Setup Menu Operations” on 
page 19. Select the “Image Adjustment” main menu, and then select 
the “Color Mode”...

Using the Setup Menu
24
Execution Type Sub-menu Item
This type of sub-menu item returns a setting to its initial default value.
Examples: Image Adjustment J Restore Menu Defaults; Operational Info J Reset Lamp 
Time
)Initializing Settings (page 25)
)Resetting the Lamp Time (User’s Guide (Basic Operation))
Information Type Sub-menu Item
This type of sub-menu item provides status and setup information.
Examples: Operational Info J Lamp Time; Operational Info J Input Signal
Refer to the following for...

25
Using the Setup Menu
Initializing Settings
The setup menu lets you initialize the settings of a particular main menu item, or for all 
setup menu items.
To initialize the settings of a particular main menu item
Example: To initialize the settings of the “Image Adjustment” main menu item.
zPerforming the following procedure returns all of the sub-menu items under the currently 
selected main menu item to their initial default settings.
1.Select the input source whose settings you want to initialize....

Using the Setup Menu
26
To initialize all menu settings
zPerforming the procedure below will initialize all settings, except for the following setup 
menu sub-menu items.
zPower on password on/off setting and the current password (Detailed Settings  J Power  
On Password)
z Language Setting (Detailed Settings  J Advanced Settings 2  J Language) 
z Lamp Time (Operational Info  J Lamp Time)
1.Perform steps 1 through 4 under “Basic Setup Menu Operations” on 
page 19. Select the “Operational Info” main menu,...

27
Using the Setup Menu
This section provides detailed explanations about the contents for all of the setup menu items.
zThe titles in this section use the format: Main Menu Item 
J Sub-menu Item.
Image Adjustment

Image Adjustment 
J Brightness
This sub-menu adjusts the brightness of the projected image. A larger value produces a 
brighter image.
zThis setting is not possible when there is no input signal.
zA different setting can be configured and is stored for each input source.

Image Adjustment 
J...

Using the Setup Menu
28

Image Adjustment 
J Color Mode
This sub-menu lets you select from among five different color settings to optimize projection in 
accordance with image contents and projection conditions.
Input Source Specific Menu Items
Setting Explanations
Presentation: Select this setting for standard presentations in a well-lit area.
Standard: Select this setting when you want to highlight the colors during your 
presentation.
Graphics: Select this setting when you want photographs and...

29
Using the Setup Menu
To adjust color balance
1.On the “Image Adjustment” main menu, select the “Color Balance” sub-
menu item, and then press the [ENTER] key.
zThis causes the “Color Balance” sub-menu to appear, which shows the current settings 
for each of the color components.
2.Press the [ENTER] key. 
zThis displays the color balance setting screen.
3.Use the [S] and [T] keys to select the color you want to adjust (red, 
green, blue), and then use the [W] and [X] keys to adjust it.
4.After you are...

Using the Setup Menu
30
Signal Settings

Signal Settings 
J Vertical Position
This sub-menu lets you adjust the vertical position of the input source image within the 
projection area.
zThis setting is possible only when RGB/Component is selected as the input source.
z“Image Adjustment” main menu item settings are saved for the current signal type only 
(XGA/60Hz, SXGA/60Hz, etc.), and not for the input signal source. Note, however, that the 
number of signal type settings that can be saved is limited....