Casio Projector XJ-V10X User Manual

51
File Viewer Setting Items
The initial default setting for each item is indicated by an asterisk (*).
Setting NameDescription
Display Sequence 
SetupSpecifies the sequence of images in the file menu.
< File Names (Ascending) >*:
Displays files in file name ascending order.
< File Names (Descending) >:
Displays files in file name descending order.
< File Name Extension (Ascending) >:
Displays file names in file name extension ascending alphabetical order. If multiple files 
have the same file name...

52
Autorun lets you configure the projector for automatic projection of image files or a movie file located 
in a special folder named “AUTORUNC”. When auto projection is performed depends on where the 
“AUTORUNC” folder is located.
The settings shown below need to be configured before using Autorun.
“Multimedia Settings 3 Autorun” (page 30): Enabled
“Option Settings 2 3 Plug and Play” (page 29): On
NoteAutorun projection of the still images or a movie file is in accordance with the current settings...

53
To auto project images files or a movie file from projector 
internal memory
1.Perform steps 1 through 8 under “To copy files from a computer to projector 
internal memory” (page 37).
2.Create a folder named “AUTORUNC” (all single-byte upper-case characters) in 
the root directory of the “InternalMem” drive (projector internal memory).
3.Insert all of the image files or movie file you want to project with Autorun into the 
folder you created in step 2.
If you want to auto project a movie file, place...

54
File Viewer Troubleshooting
ProblemCause and Required Action
File Viewer does not appear when I 
connect USB flash drive to the 
Data Projector’s USB-A port.The USB flash drive you are connecting may have a format that cannot be 
recognized by the Data Projector. Connect the USB flash drive to your 
computer to check if its file system is FAT or FAT32. If it isn’t, reformat the 
USB flash drive to FAT or FAT32. Note that doing so will delete all of the 
data currently in USB flash drive.
If “Off” is...

55
File Viewer Error Messages
ProblemCause and Required Action
Folder does not contain any image 
files.There is no displayable folder, or file in the folder you are trying to access with 
the File Viewer. Use your computer to check the contents of the folder. For 
details about file formats supported for Data Projector playback, see 
“Supported Playback Files” (page 36).
This ECA file cannot be played./
This PtG file cannot be played.There may be an error in the ECA file or PtG file itself. Play back...

56
EZ-Converter FA is computer software for converting PowerPoint files to ECA files or PtG files, which 
can be played back using the projector’s File Viewer. EZ-Converter FA supports conversion of files 
created with Microsoft Office PowerPoint 2003, 2007 and 2010.
Important!Before trying to use EZ-Converter FA, be sure to go to the CASIO website 
(http://www.casio-intl.com/support/) and check the information there about minimum 
computer system requirements, and conditions governing download and...

57
To convert a PowerPoint file to an ECA file or PtG file
Important!Before performing any of the operations here, you will need to have a file created using 
Microsoft Office PowerPoint 2003, 2007 or 2010 on hand.
Conversion of a PowerPoint file to an ECA file or PtG file requires playback of the original file 
from beginning to end. Note that the time required for conversion will roughly correspond to 
the time required for playback.
1.Turn on your computer and start up Windows.
2.Connect the USB...

58
7.Configure the settings as required on the dialog box.
The following describes the meanings and settings of each of the items that appear on the 
dialog box.
8.After configuring all the settings you want, click [OK].
This will start playback of the PowerPoint file and start converting it to an ECA file or PtG file.
The “Conversion complete.” message will appear when file conversion is complete.
If you have other PowerPoint files you want to convert, repeat steps 4 through 7.
To check the...

59
To specify the screen resolution of the ECA file or PtG file
1.Right-click the left side of the EZ-Converter FA window.
2.On the menu that appears, click “Output Resolution”.
3.On the sub-menu that appears, select the resolution you want.
Select 1280 × 800 or 1280 × 768. If you cannot select the 1280 × 800 or 1280 × 768 
resolution, select 1024 × 768.
For a PtG file, select 1024 × 768 or 800 × 600.
The setting you select here remains in effect until you change it.
To specify the maximum animation...

60
4.Select the ECA file or PtG file you want to play back and then click the [Open] 
button.
This will display a control panel at the top of the screen.
During file playback, you can use the control panel buttons to perform the operations 
described below.
To do this:Perform this operation:
Go to the previous page Click the   button.
Go to the next page Click the   button.
Jump to a specific page 1. Click the   button and then click “Slide Viewer” on the menu that appears.
2. On the page menu that...