Casio Projector XJ-V100W User Manual

41
Use the procedures in this section when you want to use File Viewer to project image files, movie files, 
presentation files, or PDF files from a USB flash drive or other memory device.
Supported Memory Devices
The Data Projector’s USB-A port supports connection of a FAT/FAT32 format memory device 
supported by the USB interface. The following are supported memory devices.
USB flash drive
Memory cards
A commercially available USB card reader is required to connect a memory card to the Data...

42
To connect a digital camera to the projector
1.If necessary, configure the digital camera’s USB mass storage class setting.
2.Turn off the digital camera and connect a USB cable to it.
3.Connect the other end of the USB cable (Type A connector) to the Data 
Projector’s USB-A port.
4.Turn on the digital camera.
NoteFor details about steps 1, 2, and 4, see the user documentation that comes with your digital 
camera.
To start projection of files that are on a memory device 
connected via USB
1.Connect...

43
4.Depending on the type of file you want to project, perform one of the operations 
below.
The screen that will appear depends on the function you selected.
5.Use the file list displayed on the screen to check the contents of the USB flash 
drive you connected in step 1 of this procedure or the contents of internal 
memory.
If the file list shows the contents of a USB flash drive, go to step 7 of this procedure. If the file 
list shows the contents of internal memory, go to step 6.
6.Press the...

44
Drive Menu
Entering the Presentation Mode, PDF Viewer Mode, Slide Mode, or Movie Mode while there are 
multiple memory devices connected to the Data Projector’s USB-A port (multiple USB flash drive 
devices connected via a USB hub, multiple memory cards loaded in the memory card reader 
connected to the Data Projector, etc.) will cause a menu like the one shown below to appear on the 
projection screen.
When this happens, use the cursor keys to move the highlighting to the drive you want to use and...

45
This section explains procedures you can project each type of file using File Viewer.
To project a presentation file
1.On the File Viewer main screen, select “Presentation” and then press the 
[ENTER] key.
This displays a menu of presentation (ECA or PtG) files.
2.Use the [] and [] keys to select the presentation file you want to play and then 
press the [ENTER] key (or [R] key).
This will start playback of the currently selected presentation file. Whenever there is an 
automatic pause in...

46
To project a PDF file
1.On the File Viewer main screen, select “PDF Viewer” and then press the [ENTER] 
key.
This displays a list of PDF files.
2.Use the [] and [] keys to select the PDF file you want to open and then press 
the [ENTER] key (or [R] key).
This will open the selected PDF file.
3.Perform page change, zoom, and other operations as required.
The following operations are supported during PDF file projection.
4.To return to the file menu, press the [ESC] key.
5.To return to the main...

47
To project an image file
1.On the File Viewer main screen, select “Slide” and then press the [ENTER] key.
This displays a list of image files.
2.Use the [] and [] keys to select image file you want to open and then press 
the [ENTER] key.
This will project the selected image file.
Pressing the [R] key instead of the [ENTER] key will start an image file slideshow starting 
from the currently selected file.
3.Perform the rotate image and image scrolling operations described below as 
required.
The...

48
3.Perform fast forward, fast reverse, pause, and other operations as required.
The operations described below are supported during movie file playback.
4.To return to the file menu, press the [ESC] key.
5.To return to the main screen, press the [FUNC] key and then the [ENTER] key.
To do this:Perform this operation:
Pause and resume movie playback Press the [ENTER] or [R] key.
A pause icon ( ) is displayed in the upper left 
corner of the projection screen while movie 
projection is paused.
Re-play...

49
There are two different views for the File Viewer file menu: a list view and an icon view.
List View
This view shows a list of names of folders and files in the projector internal memory, or on memory 
device connected to the projector’s USB port. Folders and files are displayed in this format 
immediately after you go from the File Viewer main screen to the Presentation Mode, PDF Viewer 
Mode, Slide Mode, or Movie Mode.
Icon View
This view shows both icons and names for the folders and files....

50
This section explains how to configure File Viewer settings, including those that control what appears 
on the File Viewer file menu.
To configure File Viewer settings
1.On the File Viewer main screen, select “Viewer Settings” and then press the 
[ENTER] key.
This displays the “Viewer Setup” screen.
2.Use [] and [] to select the item whose setting you want to change.
3.Use [] and [] to change the currently selected setting.
For information about the settings available for each item, see “File...