Casio Projector XJ-V100W User Manual

31
Restore All Defaults 3 
Restore All DefaultsInitialize all Setup Menu item settings, except for those below.
Option Settings 1 3 Language, Option Settings 1 3 Power On Password, 
Operational Info 3 Light Time, Operational Info 3 Version, 
Restore All Defaults 3 Unit Operating Time
NoteA user logo image that has been transferred to the projector (page 76) is not 
deleted by a “Restore All Defaults” operation.
Use this menu item:To do this: 

32
The operations described below can be password protected on the projector. You can have only one 
password assigned to the projector at any time, and the same password is used for operations.
Projector startup protection
The projector can be configured so a dialog box prompting input of the password is displayed 
whenever the projector is turned on. In this case, further operation of the projector is not possible 
unless the correct password is input. This protects against unauthorized use of the...

33
To change the password
1.Press the [MENU] key to display the setup menu.
2.Use the [] key to select “Option Settings 1”, and then press the [ENTER] key.
3.Use the [] key to select “Password”, and then press the [ENTER] key.
This will display a dialog box prompting you to enter the current password.
4.Enter the current password.
The password of your projector is not really a “word” made up of letters, but rather a 
sequence of remote controller key inputs.
If the projector is still protected by...

34
To change the power on password setting
1.Perform steps 1 through 5 under “To change the password” (page 33) and 
display the Password screen.
2.After confirming that “Power On Password” is selected, use the [] and [] keys 
to select either the “On” or “Off” setting.
Changing the setting from “Off” to “On” will cause the “Prompt for password when power is 
turned on?” dialog box to appear. Press the [ENTER] key to confirm that you want to turn on 
power on password protection, or [ESC] to exit the...

35
Control panel lock disables (locks) all of the projectors keys, except for the [P] key. This limits 
projector operation to the remote controller, which protects against inadvertent mis-operation.
To lock the control panel
1.Press the [MENU] key to display the setup menu.
2.Use the [] key to select “Option Settings 2”, and then press the [ENTER] key.
3.Use the [] key to select “Control Panel Lock”.
4.Use the [] key to select “On”.
5.When the confirmation dialog box appears, press the [ENTER] key....

36
Projecting from Built-in Memory or USB Input 
(Network Models Only)
This section explains operations using the projector’s “File Viewer” (to project the contents of files in 
built-in memory or on a USB flash drive), “USB Display” (to project data from a computer over a USB 
connection), and “CASIO USB Tool” (to project CASIO calculator screen contents).
File Viewer is an application you can use for viewing or playing back different types of files located in 
projector internal memory or on a memory...

37
File Viewer can be used to project the following types of files when they are located in projector 
internal memory: image files, movie files, presentation files, PDF files. To use the procedure in this 
section, the file(s) to be projected must first be copied to projector internal memory. You can copy files 
using either of the following methods.
Connect the projector to a computer with a USB cable and copy the files to projector internal 
memory.
Use a LAN to copy (upload) files from a computer...

38
8.On the computer, open the “InternalMem” drive.
9.Copy the file(s) you want to project to the “InternalMem” drive.
10.After you copy all of the files you want, perform one of the operations below to 
unmount the “InternalMem” drive.
11.Disconnect the USB cable from the projector and the computer.
12.Turn the projector back on.
This stops internal storage function operation and returns to normal projection.
For information about how to project a file copied to projector internal memory, see...

39
Starting Projection of Files Located in Projector Internal 
Memory
1.If a USB flash drive or some other USB device is connected to the projector’s 
USB-A port, disconnect it.
2.Press the [INPUT] key. This will display the “Input” dialog box.
3.Use the [] and [] keys to select “Viewer” and then press the [ENTER] key.
4.On the dialog box that appears, confirm that “File Viewer” is selected and then 
press the [ENTER] key.
This will start up File Viewer and display the File Viewer main screen like the...

40
To format projector internal memory (Windows users only)
Important!Performing the procedure below will delete all of the folders and files currently in the projector 
internal memory.
1.Perform steps 1 through 7 under “To copy  files from a computer to projector 
internal memory” (page 37).
2.Perform the procedure below to format  the “InternalMem” drive on your 
computer.
*CautionNever format projector in ternal memory from a computer running Mac OS. 
Doing so can disable the projector’s USB...