Casio Projector XJ-S31 XJ-S36 XJ-S41 XJ-S46 User Manual

11
Configuring Advanced Projector Settings
Your projector has a setup menu that you can use to configure advanced settings.
Displaying the Setup Menu
Pressing the [MENU] key displays the menu  shown below in the center of the projection 
screen.
Note
You can position the setup menu in the c enter or on the left edge of the projection 
screen. For details, see “Menu Position” under  “Option Settings 1 Main Menu” on page 
24.
To exit the setup menu
Press the [MENU] key.
Configuring Set up Menu Settings...

12
Basic Setup Menu Example
The procedure below shows how to configure the following three settings:
 Image Adjustment  J Contrast
 Image Adjustment  J Color Mode
 Option Settings 1  J Eco Mode
Note
z Certain settings on the setup menu cannot  be changed while there is no input signal 
to the projector. Because of this, you  should configure setup menu settings after 
selecting an input source  and starting projection.
z This example covers basic steps only. For  more detailed information, see “Setup...

13
To configure the “Option Settings 1 J Eco Mode” setting
9Press the [ESC] key.
10Press the [ T] key four times to select “Option Settings 1”.
11Press the [ENTER] key.
12Press the [ T] key three times to select “Eco Mode”.
13Use the [ W] and [ X] keys to select “On” or “Off”.
14After you are finished, press the [MENU] key to exit the setup menu.
The password feature lets you keep unauthorized individuals from using the projector. You 
can specify whether password input  is required whenever you turn on...

14
If you forget your password...
You will not be able to use the projector if you forget the password for some reason. If 
you forget the password, you will need to bring the following two items to your CASIO 
distributor to have the password cleared. Note that you will be charged to have the 
password cleared.
1. Personal identification (original or copy of you driver’s license, employee I.D., etc.)
2. Projector unit
Note that your CASIO distributor will not be  able to clear the password of your...

15
7Enter a key sequence up to eight key operations long.
zYou can use any of the following keys as part of your password key sequence. 
[INPUT], [AUTO], [BLANK], [FREEZE], [COLOR MODE], [D-ZOOM +], 
[D-ZOOM –], [KEYSTONE +], [KEY STONE –], [MENU], [POINTER], 
[ ], [U], […], [S ], 
[ T ], [ W], [ X], [FUNC]
8After entering the new password, press the [ENTER] key.
z This will display a dialog box prompting you to enter the same password again.
9Re-enter the same password key sequence you entered in step...

16
You can use the procedures in this section to restore all of the settings on a particular main 
menu or all of the settings on the setup menu to their initial factory defaults.
To restore all settings on a particular  main menu to their initial factory 
defaults
1Press the [MENU] key to display the setup menu.
2Use the [ T] and [ S] keys to select the main menu whose settings you want to 
restore to their initial factory defaults.
z You can select Image Adjustment, Volume Adjustment, Screen Settings,...

17
To restore all settings on the setup menu to their initial factory defaults
1Press the [MENU] key to display the setup menu.
2Use the [T] key to select “Restore All Defaults”, and then press the [ENTER] 
key.
z This displays a confirmation message asking if you want to initialize all settings.
3Use the [ S] key to select “Yes”.
4To restore all settings on the setup me nu to their initial defaults, press the 
[ENTER] key.
z This will restore all of the settings to their initial factory defaults,...

18
Image Adjustment Main Menu
Setting NameInputSetting UnitDescription
Brightness RCVU Source  SpecificUse this sub-menu to adjust the brightness of the 
projected image. A larger value produces a brighter 
image.
Contrast RCVU Source  SpecificUse this sub-menu to adjust the contrast of the projected 
image. A larger value produces a stronger contrast.
Sharpness RCV Source 
Specific Use this sub-menu to adjust the sharpness of the outlines 
in the projected image. A larger value makes the image...

19
About the “Signal Specific” Setting Unit
For the items that have “Signal Specific” in the “Setting Unit” column of the above table, 
the setting is saved for the specific type of signal (XGA/60Hz, SXGA/60Hz, etc.) that is 
being input when the setting is performed, and not for a specific input source.
Ve r t i c a l  
Po sitionRCV Signal 
Specific Use this sub-menu to adjust the vertical position of the 
input source image within the projection area.
Horizontal 
Po sition RCV Signal 
Specific Use...

20
Volume Adjustment Main Menu
Setting NameInputSetting UnitDescription
Volume RCV UN Source 
Specific Use this sub-menu to adjust the volume level of the 
projector’s speaker.
z
Changing this setting when there is no input signal 
changes the volume setting of the currently selected 
signal source.
Restore Menu 
Defaults RCV
UN Source 
Specific Use this sub-menu to return Volume to its initial default 
setting.
z
Restoring menu defaults when there is no input signal 
will restore defaults for the...