Casio Projector XJ-M250 XJ-M255 User Manual

51
Input source: Video, S-video, component or HDMI (DTV)
Input SignalNormal16:9
4:3 Aspect Image
Squeezed Image
Letter Box Image 

52
Important!Even if a signal is listed in the table below, it does not guarantee that you will be able to display 
its images correctly.
RGB Signal
Supported Signals
Signal NameResolutionHorizontal Frequency 
(kHz)Vertical Frequency 
(Hz)
VESA640 × 480/60 640 × 480 31.5 60
640 × 480/72 640 × 480 37.9 73
640 × 480/75 640 × 480 37.5 75
640 × 480/85 640 × 480 43.3 85
800 × 600/56 800 × 600 35.2 56
800 × 600/60 800 × 600 37.9 60
800 × 600/72 800 × 600 48.1 72
800 × 600/75 800 × 600 46.9 75
800 × 600/85 800...

53
Component Signal
Video Signal, S-video Signal
Signal NameHorizontal Frequency 
(kHz)Vertical Frequency 
(Hz)
HDTV1080p/50 56.3 50
1080p/60 67.5 60
720p/50 37.5 50
720p/60 45.0 60
1080i/50 28.1 50
1080i/60 33.7 60
SDTV576p/50 31.3 50
576i/50 16.6 50
480p/60 31.5 60
480i/60 15.7 60
Signal NameHorizontal Frequency 
(kHz)Vertical Frequency 
(Hz)
NTSC 15.7 60
NTSC4.43 15.7 60
PAL 15.6 50
PAL-M 15.7 60
PAL-N 15.6 50
PAL60 15.7 60
SECAM 15.6 50 

54
HDMI Signal
3D Signals (3D Input Mode)
Signal NameHorizontal Frequency 
(kHz)Vertical Frequency 
(Hz)
640 × 480/60 31.5 60
800 × 600/60 37.9 60
1024 × 768/60 48.4 60
1280 × 768/60 47.8 60
1280 × 800/60 49.7 60
1280 × 960/60 60 60
1280 × 1024/60 64 60
1400 × 1050/60 65.3 60
SDTV (480p) 31.5 60
SDTV (576p) 31.25 50
HDTV (720p) (50) 37.5 50
HDTV (720p) (60) 45 60
HDTV (1080i) (50) 28.13 50
HDTV (1080i) (60) 33.75 60
HDTV (1080p) (50) 56.25 50
HDTV (1080p) (60) 67.5 60
Signal NameHorizontal Frequency...

55
The projector can be controlled by a computer or other external device by connecting the device to 
the projector’s LAN port.
Supported External Devices
This projector supports all commands of PJLink Class1 (Version 1.00).
http://pjlink.jbmia.or.jp/english/
This projector is supported by the commands of the Crestron Electronics controller and software 
(RoomView®).
http://www.crestron.com/
This projector is supported by AMX Device Discovery.
http://www.amx.com/
Information about the types of external...

56
2.Look up the projector’s IP address.
zPerform the following steps to look up the projector’s current IP address.
3.On the computer, start up a Web browser.
4.In the Web browser address bar, input the projector’s IP address and then press 
the [Enter] key.
zIf the projectors current IP address is 192.168.100.10, for example, you would input: 
“http://192.168.100.10”.
zThis displays the top page of the projector’s System Admin page.
zFor information about what you should do next, see “To control the...

57
To control the projector using the Wireless Presentation System control 
panel
1.Depending on the type of LAN connection you are using, perform either of the 
following operations to display the top page of the projector’s System Admin 
page.
2.Click “System Admin”. On the password input screen that appears, enter the 
password.
zThe initial default password is “admin”.
3.Click the [Login] button.
zThis logs in to the System Admin page and displays the Status screen.
4.Click “Control panel” on the...

58
Image Input Specifies the input source. The following are the available input source 
options.
3D Puts the projector into the 3D input mode or normal input mode.
On: 3D input mode
Off: Normal input mode
zNote that this setting cannot be change while the currently selected 
input source is “Computer (Component)”, “HDMI”, or “USB”.
Color mode Specifies the color mode.
zFor details about this setting, see “Selecting the Color Mode” (page 
13).
Blank Selecting “On” for this setting temporarily blocks the...

59
5.After all of the settings are the way you want, click “Logout”.
NoteThe “Status”, “Setup”, “Change Password”, and “Restore Factory Defaults” items along the left 
side of the screen are mainly for accessing information and configuring settings related to 
projector wireless LAN connection. You can access these items when connected over a wired 
LAN as well. For details, see “System Admin Page Operations and Settings” in the “Wireless 
Function Guide” on the CD-ROM that comes with the projector....

60
You can use a commercially available serial cable (cross) to connect the projector to a computer and 
control the projector from the computer.
Connecting the Projector to a Computer
Connect the projector to the computer as shown in the illustration below.
*A D-Sub 9-pin (male) type connector is standard for computer serial ports, but there may be cases 
where the shape of a particular computer’s connector is different. For details about connecting a 
commercially available serial cable to your...