Casio Projector XJ-H2650 User Manual

31
Supported Capture Images
Not all types of projection images are supported. Note the following precautions that correspond to 
each specific input source.
To specify a custom logo as the startup screen, no signal screen, or blank 
screen
1.Press the [MENU] key to display the setup menu.
2.Use the [T] key to select “Screen Settings”,  and then press the [ENTER] key.
3.To specify the custom logo as the Startup Screen, use the [T] key to select 
“Startup Screen”, and then press the [ENTER] key.
z You...

32
The operations described below can be password protected on the projector. You can have only one 
password assigned to the projector at any time, and the same password is used for operations.
zProjector startup protection
The projector can be configured so a dialog box prompting input of the password is displayed 
whenever the projector is turned on. In this case, further operation of the projector is not possible 
unless the correct password is input. This protects against unauthorized use of the...

33
If you forget your password...
If you forget the password, you will need to bring the following two items to your CASIO distributor to 
have the password cleared. Note that you will be charged to have the password cleared.
Note that your CASIO distributor  will not be able to clear the password of yo ur projector unless you 
bring both of the items listed above.
Also, keep the projector’s warranty in a safe place.
Important!Having your password cleared using the procedure described above will return...

34
8.After entering the new password, press the [ENTER] key.
zThis will display a dialog box prompting you to enter the same password again.
9.Re-enter the same password key sequence you entered in step 7 and then press 
the [ENTER] key.
zThe message “Your new password has been registered.” indicates that the password has 
been changed. Press the [ESC] key.
zIf the password you entered in this step is different from the one you entered in step 7, the 
message “The password you input is wrong.” appears....

35
Control panel lock disables (locks) all of the projectors keys, except for the [P] (Power) key. This limits 
projector operation to the remote controller, which protects against inadvertent mis-operation.
To lock the control panel
1.Press the [MENU] key to display the setup menu.
2.Use the [T] key to select “Option Settings 2”, and then press the [ENTER] key.
3.Use the [T] key to select “Control Panel Lock” and then press the [ENTER] key.
4.Use the [W] key to select “On”.
5.When the confirmation...

36
You can use the procedures in this section to restore all of the settings on a particular main menu or all 
of the settings on the setup menu to their initial factory defaults.
To restore all settings on a particular main menu to their initial factory 
defaults
1.Press the [MENU] key to display the setup menu.
2.Use the [T] and [S] keys to select the main menu whose settings you want to 
restore to their initial factory defaults.
zYou can select Image Adjustment 1, Image Adjustment 2, Volume...

37
To restore all settings on the setup menu to their initial factory defaults
1.Press the [MENU] key to display the setup menu.
2.Use the [T] key to select “Restore All Defaults” and then press the [ENTER] key.
3.After confirming that “Restore All Defaults” sub-menu is selected, press the 
[ENTER] key.
zThis displays a confirmation message asking if you want to initialize all settings.
4.Use the [S] key to select “Yes”.
5.To restore all settings on the setup menu to their initial defaults, press the...

38
This section contains tables that provide detailed explanations of all of the items included on the setup 
menu. The following describes the type of information that appears in each of the columns of the 
tables.
Image Adjustment 1 Main Menu
Setup Menu Contents
Setting Name: This column shows the names of the settings as they appear on the sub-menu.
Input: This column shows the input source for which each setting is supported.
Input source names are abbreviated as follows:
R : RGB input
C  : Component...

39
Color ModeRCVHDUSource 
SpecificYou can select from among various different color mode settings in 
accordance with image contents and projection conditions.
Standard:
Use this setting when you want to highlight the colors of your 
presentation.
Graphics:
Use this setting when you want photographs and graphics to 
appear natural.
Theater:
Use this setting to bring out the dark portions of your images.
Blackboard:
Use this setting for easy viewing when projecting onto a 
blackboard.
Game:
Use this...

40
Image Adjustment 2 Main Menu
About the “Signal Specific” Setting Unit
For the items that have “Signal Specific” in the “Setting Unit” column of the above table, the setting is 
saved for the specific type of signal (XGA/60Hz, SXGA/60Hz, etc.) that is being input when the setting 
is performed, and not for a specific input source.
Volume Adjustment Main Menu
Setting NameInputSetting UnitDescription
Vertical 
Position
RCVSignal 
SpecificUse this sub-menu to adjust the vertical position of the input...